Detection of Primary Server Failure in DHCPv6 Failover
draft-zhang-dhc-dhcpv6-failure-detection-01
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
|---|---|---|---|
| Authors | Lanshan Zhang , Wendong Wang , Yuchi Chen , Linhui Sun | ||
| Last updated | 2015-11-07 (Latest revision 2015-05-06) | ||
| RFC stream | (None) | ||
| Formats | |||
| Additional resources | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
In DHCPv6 failover or other multiple servers deployment scenarios, an automatic failure detection capability may be desirable. This document describes a detection method, with which the secondary server can detect the link failure between the primary server and clients. This document does not define any protocol details.
Authors
Lanshan Zhang
Wendong Wang
Yuchi Chen
Linhui Sun
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)