Requirements Analysis for OPC UA over CoAP
draft-wang-core-opcua-transmition-requirements-02
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
---|---|---|---|
Authors | Heng Wang , Chenggen Pu , Ping Wang , 15023705316@163.com , Daijing Xiong | ||
Last updated | 2018-06-17 (Latest revision 2017-12-14) | ||
RFC stream | (None) | ||
Formats | |||
Additional resources | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Constrained Application Protocol (CoAP) is a application protocol proposed for constrained nodes and constrained networks. Applying CoAP protocol in the Industrial Internet of Things (IIoT) is a very attractive scenarios. OPC Unified Architecture (OPC UA) defines a semantic-based information model and a service-oriented architecture for industrial control system that can satisfy the requirements of Industry 4.0, which is based on semantic information exchange. This document analyses requirements for transmitting OPC UA over CoAP.
Authors
Heng Wang
Chenggen Pu
Ping Wang
15023705316@163.com
Daijing Xiong
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)