Skip to main content

Domain Path (D-PATH) for Ethernet VPN (EVPN) Interconnect Networks
draft-sr-bess-evpn-dpath-04

Document Type Replaced Internet-Draft (individual)
Expired & archived
Authors Jorge Rabadan , Senthil Sathappan , Mallika Gautam , Patrice Brissette , Wen Lin , Bin Wen
Last updated 2023-10-23
Replaced by draft-ietf-bess-evpn-dpath
RFC stream (None)
Intended RFC status (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-ietf-bess-evpn-dpath
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

The BGP Domain PATH (D-PATH) attribute is defined for Inter-Subnet Forwarding (ISF) BGP Sub-Address Families that advertise IP prefixes. When used along with EVPN IP Prefix routes or IP-VPN routes, it identifies the domain(s) through which the routes have passed and that information can be used by the receiver BGP speakers to detect routing loops or influence the BGP best path selection. This document extends the use of D-PATH so that it can also be used along with other EVPN route types.

Authors

Jorge Rabadan
Senthil Sathappan
Mallika Gautam
Patrice Brissette
Wen Lin
Bin Wen

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)