Operations, Administration, and Maintenance for MPLS-SR over IP
draft-mirsky-mpls-oam-mpls-sr-ip-02
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
|---|---|---|---|
| Author | Greg Mirsky | ||
| Last updated | 2019-10-22 (Latest revision 2019-04-20) | ||
| RFC stream | (None) | ||
| Formats | |||
| Additional resources | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Segment routing uses source routing paradigm to traffic engineering by specifying segments a packet traverses through the network. MPLS Segment Routing applies that paradigm to an MPLS data plane-based networks. SR-MPLS over IP uses MPLS label stack as a source routing instruction set and uses IP encapsulation/tunneling such as MPLS-in- UDP as defined in RFC 7510 to realize a source routing mechanism across MPLS, IPv4, and IPv6 data planes. This document describes Operations, Administration, and Maintenance operations in SR-MPLS over IP environment.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)