Mobility for IPv6 (mip6) Concluded WG
Note: The data for concluded WGs is occasionally incorrect.
|WG||Name||Mobility for IPv6|
|Area||Internet Area (int)|
|Dependencies||Document dependency graph (SVG)|
Charter for Working Group
Mobile IPv6 (MIP6) specifies routing support which permits an IPv6
host to continue using its home address as it moves around the
Internet, enabling continuity of sessions. Mobile IPv6 supports
transparency above the IP layer, including maintenance of active
transport level sessions. The base specifications for Mobile IPv6
o RFC 3775
o RFC 3776
The primary goal of the MIP6 working group will be to enhance base
IPv6 mobility by continuing work on developments that are required for
wide-scale deployments. Additionally the working group will ensure
that any issues identified by implementation and interoperability
experience are addressed, and that the base specifications are
maintained. The group will also produce informational documentation,
such as design rationale documents or description of specific issues
within the protocol.
Deployment considerations call for work to reduce per-mobile node
configuration and enrollment effort, solutions to enable dual-stack
operation, mechanisms to support high-availabity home agents, and ways
to employ Mobile IPv6 in the presence of firewalls.
Work items related to base specification maintenance include:
- Create and maintain an issue list that is generated on the basis of
implementation and interoperability experience. Address specific
issues with specific updates or revisions of the base
specification. One specific area of concern that should
be analyzed and addressed relates to multilink subnets.
This work item relates only to corrections and
clarifications. The working group shall not revisit design
decisions or change the protocol.
- Update RFC 3776 to specify the usage of IKEv2 for the establishment
of the IPsec SA between the MN and HA. This work also provides a
way for a mobile node to change its home address or employ multiple
home addresses as needed.
- Update the IANA considerations of RFC 3775 to allow extensions for
experimental purposes as well passing of optional vendor-specific
Work items related to large scale deployment include:
- Bootstrapping Mobile IPv6: A bootstrapping mechanism is intended to
be used when the device is turned on the very first time and
activates Mobile IPv6, or periodically such as when powering
on. The WG should investigate and define the scope before solving
Work on the problem statement and the solutions needed for various
deployment scenarios. Work with other WGs such as DHC for defining
the options needed for bootstrapping.
- Capture the AAA requirements needed for bootstrapping and
deployment, and work with the Radext and DiME WGs on the solutions.
- A Solution for MIP6 session continuity for dual stack hosts which
attach to IPv4 access networks. Additionally provide a mechanism
for carrying IPv4 packets via the Home agent for MIP6 capable
dual-stack hosts. This work will be done in collaboration with the
- A protocol based solution for enhancing the reliability of home
agents and a method to force a host to switch home agents.
- A mechanism to force an MN to switch the HA that is currently
serving it. This is required in deployments where the HA may need
to be taken offline for maintenance.
- Work on solutions to deal with firewalls and the problems that
firewalls cause as identified in RFC 4487.
Work items related to informational documentation include:
- Produce a problem statement relating to location privacy and the
use of Mobile IPv6. Work with the IRTF MOBOPTS RG on developing the
- Produce a design rationale that documents the historical
thinking behind the introduction of an alternative security
mechanism, the Authentication Protocol (RFC 4285).
It should be noted that some of the features that are directly related
to Mobile IPv6 are being worked on in the MONAMI6, MIPSHOP, and NEMO
working groups. The specific extensions from these groups are out of
scope for the MIP6 working group. In particular, all optimizations are
out of scope. However, MIP6 may assist these groups when they use
features listed above and have requirements on them.
|Feb 2008||Submit I-D(s) related to specific updates and corrections of RFC 3775 to IESG for publication as Proposed Standard.|
|Feb 2008||Submit I-D 'Mobile IPv6 Operation with Firewalls' to IESG for publication as Informational.|
|Dec 2007||Submit the I-D 'RADIUS Mobile IPv6 Support' to IESG for publication as a proposed standard.|
|Dec 2007||Submit I-D 'Mobile IPv6 Experimental Allocations' to IESG for publication as a Proposed Standard.|
|Oct 2007||Submit I-D 'Mobile IPv6 Vendor Specific Option' to IESG for publication as a Proposed Standard|
|Sep 2007||Submit I-D 'Mobile IPv6 Dual-Stack Operation' to IESG for publication as a Proposed Standard.|
|Sep 2007||Submit I-D 'Home agent reliability' to IESG for publication as a Proposed Standard.|
|Aug 2007||Submit I-D 'Goals for AAA HA Interface' to IESG for publication as Informational.|
|Jul 2007||Submit I-D 'Mobility Header Home Agent Switch Message' to IESG for publication as a Proposed Standard.|
|Jul 2007||Submit I-D 'DHCP Options for Home Information Discovery in MIPv6' for publication as a proposed standard.|
|Apr 2007||Submit I-D 'Motivation for Authentication I-D' to IESG for publication as Informational.|
|Done||Submit I-D 'Bootstrapping solution for Integrated Scenario' to IESG for publication as a Proposed Standard.|
|Done||Submit I-D 'Bootstrapping solution for split Scenario' to IESG for publication as a Proposed Standard.|
|Done||Submit I-D 'Address Location Privacy and Mobile IPv6 Problem Statement' to IESG for publication as Informational.|
|Done||Submit I-D 'Mobility management for Dual stack mobile nodes: A Problem Statement' to IESG for publication as Informational.|
|Done||Submit Problem statement and Solution to Mobile IPv6 transition between v4/v6 networks to IESG|
|Done||Submit I-D 'MIPv6 operation with IKEV2 and the revised IPsec Architecture to IESG|
|Done||Submit I-D 'Identification Option for MIPv6' to IESG|
|Done||Submit I-D 'Authentication Option for MIPv6' to IESG|
|Done||Submit Bootstrapping problem statement to IESG|
|Done||Submit I-D 'Alternate Route Optimization (Pre-config Key) scheme' to IESG|
|Done||Submit I-D 'Extensions to Socket Advanced API for MIPv6' to IESG|
|Done||Submit I-D 'MIPv6 MIB' to IESG|
|Done||Submit I-D 'Issues with firewall Problem statement' to IESG|