L3DL Upper Layer Protocol Configuration
draft-ymbk-lsvr-l3dl-ulpc-02
The information below is for an old version of the document.
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
Expired & archived
|
|
---|---|---|---|
Authors | Randy Bush , Keyur Patel | ||
Last updated | 2020-05-05 (Latest revision 2019-11-02) | ||
Replaced by | draft-ietf-lsvr-l3dl-ulpc | ||
RFC stream | (None) | ||
Formats | |||
Additional resources | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document users the Layer 3 Liveness and Discovery protocol to communicate the parameters needed to exchange inter-device Upper Layer Protocol Configuration for upper layer protocols such as the BGP family.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)