Specification Alternate Tunnel Information for Data Frames in WLAN
draft-xue-opsawg-capwap-alt-tunnel-information-01
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Dapeng Liu , Rong Zhang , Li Xue , John Kaippallimalil , Rajesh Pazhyannur , Sri Gundavelli | ||
| Last updated | 2015-04-27 (Latest revision 2014-10-24) | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
In IEEE 802.11 Wireless Local Area Network (WLAN) architecture, in order to satisfy the scalability requirement, customer data frames are desired to be distributed to an endpoint as Access Router(AR) different from the Access Controller (AC). For tunneling the data frames, there are many known alternate tunnel technologies can be used, such as IP-GRE, IP-in-IP, CAPWAP, L2TP/L2TPv3, etc. To assist a WTP to set up the alternate tunnels for data plane, this document extends the CAPWAP message elements.
Authors
Dapeng Liu
Rong Zhang
Li Xue
John Kaippallimalil
Rajesh Pazhyannur
Sri Gundavelli
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)