Multipoint LDP Extension for P2MP-based BIER
draft-xie-mpls-ldp-bier-extension-01
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Jingrong Xie , Mach Chen , Zhenbin Li | ||
| Last updated | 2019-03-09 (Latest revision 2018-09-05) | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Bit Index Explicit Replication (BIER) is a new architecture that provides optimal multicast forwarding without requiring intermediate routers to maintain any per-flow state by using a multicast-specific BIER header. An extension to the Label Distribution Protocol (LDP) defined in [RFC5036] for the setup of point-to-multipoint (P2MP) is described in [RFC6388] is called mLDP, and is used for multicast- specific tree building. This document describes mLDP extensions to setup a P2MP with BIER information, which is called P2MP based BIER in [I-D.xie-bier-mvpn-mpls-p2mp].
Authors
Jingrong Xie
Mach Chen
Zhenbin Li
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)