Extension to Packet Loss Measurement for Counting Activation and Deactivation
draft-xiao-mpls-tp-lm-counting-extension-00
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Xiao Min , Jian Yang , Bo Wu | ||
| Last updated | 2010-07-05 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Packet loss measurement for MPLS Transport Profile (MPLS-TP) PseudoWires, Label Switched Paths, and Sections, is an important Operation, Administration and Maintenance (OAM) function of the MPLS-TP. When this OAM function is performed, counting the transmitted and received packets at both the source MEP and the sink MEP needs to be activated at first. This document specifies OAM packets and protocol mechanism to facilitate the counting activation and deactivation at the sink MEP, and leave out the unnecessary management configuration at the sink MEP when the MPLS-TP connection is bidirectional or there exists an out-of-band return path.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)