In-situ OAM Direct Exporting
draft-ioamteam-ippm-ioam-direct-export-00

Document Type Replaced Internet-Draft (ippm WG)
Last updated 2019-12-09 (latest revision 2019-10-12)
Replaced by draft-ietf-ippm-ioam-direct-export
Stream IETF
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized (tools) htmlized bibtex
Stream WG state Adopted by a WG
Document shepherd No shepherd assigned
IESG IESG state Replaced by draft-ietf-ippm-ioam-direct-export
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ioamteam-ippm-ioam-direct-export-00.txt

Abstract

In-situ Operations, Administration, and Maintenance (IOAM) is used for recording and collecting operational and telemetry information. Specifically, IOAM allows telemetry data to be pushed into data packets while they traverse the network. This document introduces a new IOAM option type called the Direct Export (DEX) option, which is used as a trigger for IOAM data to be directly exported to a collector without being pushed into in-flight data packets.

Authors

Haoyu Song (haoyu.song@huawei.com)
Barak Gafni (gbarak@mellanox.com)
Tianran Zhou (zhoutianran@huawei.com)
Zhenbin Li (lizhenbin@huawei.com)
Frank Brockners (fbrockne@cisco.com)
Shwetha Bhandari (shwethab@cisco.com)
Ramesh Sivakolundu (sramesh@cisco.com)
Tal Mizrahi (tal.mizrahi.phd@gmail.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)