Deployment Considerations for In-situ OAM with IPv6 Options
draft-ioametal-ippm-6man-ioam-ipv6-deployment-03

Document Type Expired Internet-Draft (individual)
Authors Shwetha Bhandari  , Frank Brockners  , Tal Mizrahi  , Aviv Kfir  , Barak Gafni  , Mickey Spiegel  , Suresh Krishnan  , Mark Smith 
Last updated 2020-09-30 (latest revision 2020-03-29)
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized (tools) htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ioametal-ippm-6man-ioam-ipv6-deployment-03.txt

Abstract

In-situ Operations, Administration, and Maintenance (IOAM) records operational and telemetry information in the packet while the packet traverses a path between two points in the network. This document outlines how IOAM can be enabled in an IPv6 network.

Authors

Shwetha Bhandari (shwethab@cisco.com)
Frank Brockners (fbrockne@cisco.com)
Tal Mizrahi (tal.mizrahi.phd@gmail.com)
Aviv Kfir (avivk@mellanox.com)
Barak Gafni (gbarak@mellanox.com)
Mickey Spiegel (mickey.spiegel@intel.com)
Suresh Krishnan (suresh@kaloom.com)
Mark Smith (markzzzsmith+id@gmail.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)