Technical Summary
This document updates RFC 5066. It amends that specification by
informing the internet community about the transition of the EFM-CU-
MIB module from the concluded IETF Ethernet Interfaces and Hub MIB
Working Group to the Institute of Electrical and Electronics
Engineers (IEEE) 802.3 working group. This document provides an updated
security considerations section for IF-CAP-STACK-MIB
Working Group Summary
The document was much simplified during the Working Group discussions,
and now contains only information about the transfer of the Ethernet
specific MIB module to the IEEE and describes the fact that the
IF-CAP-STACK-MIB remains under IETF control.
Document Quality
The document does not define a new protocol, but provides information about
the future of the MIB modules defined in RFC 5066
Personnel
Dan Romascanu is the Document Shepherd.
Benoit Claise is the Responsible Area Director.
RFC Editor Note
OLD:
The current version of IEEE8023-EFM-CU-MIB, defined in IEEE Std
802.3.1-2013, has MODULE-IDENTITY of ieee8023efmCuMIB with an object
identifier allocated under the { org ieee standards-association-
numbers-series-standards lan-man-stds ieee802dot3 ieee802dot3dot1mibs
} sub-tree.
NEW:
The current version of IEEE8023-EFM-CU-MIB, defined in IEEE Std
802.3.1-2013, has MODULE-IDENTITY of ieee8023efmCuMIB with an object
identifier allocated under the { iso(1) iso-identified-organization(3)
ieee(111) standards-association-numbered-series-standards(2)
lan-man-stds(802) ieee802dot3(3) ieee802dot3dot1mibs(1) } sub-tree.