Signaling MSD (Maximum SID Depth) using IS-IS
draft-ietf-isis-segment-routing-msd-12

The information below is for an old version of the document
Document Type None Internet-Draft (lsr WG)
Last updated 2018-06-16 (latest revision 2018-05-16)
Replaces draft-tantsura-isis-segment-routing-msd
Stream IETF
Intended RFC status Proposed Standard
Formats
Expired & archived
pdf htmlized bibtex
Reviews
Additional URLs
- Mailing list discussion
Stream WG state (None)
Document shepherd Christian Hopps
Shepherd write-up Show (last changed 2018-06-16)
IESG IESG state Unknown state
Consensus Boilerplate Yes
Telechat date
Responsible AD Alvaro Retana
Send notices to Christian Hopps <chopps@chopps.org>

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ietf-isis-segment-routing-msd-12.txt

Abstract

This document defines a way for an IS-IS Router to advertise multiple types of supported Maximum SID Depths (MSDs) at node and/or link granularity. Such advertisements allow entities (e.g., centralized controllers) to determine whether a particular SID stack can be supported in a given network. This document only defines one type of MSD maximum label imposition, but defines an encoding that can support other MSD types.

Authors

Jeff Tantsura (jefftant.ietf@gmail.com)
Uma Chunduri (uma.chunduri@huawei.com)
Sam Aldrin (aldrin.ietf@gmail.com)
Les Ginsberg (ginsberg@cisco.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)