Performance Measurement in Segment Routing Networks with MPLS Data Plane
draft-gandhi-spring-sr-mpls-pm-03

Document Type Replaced Internet-Draft (individual)
Last updated 2018-09-14
Replaced by draft-gandhi-spring-rfc6374-srpm-mpls
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-gandhi-spring-rfc6374-srpm-mpls
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-gandhi-spring-sr-mpls-pm-03.txt

Abstract

RFC 6374 specifies protocol mechanisms to enable the efficient and accurate measurement of packet loss, one-way and two-way delay, as well as related metrics such as delay variation in MPLS networks using probe messages. This document reviews how these mechanisms can be used for Delay and Loss Performance Measurements (PM) in Segment Routing (SR) networks with MPLS data plane (SR-MPLS), for both SR links and end-to-end SR Policies. The performance measurements for SR links are used to compute extended Traffic Engineering (TE) metrics for delay and loss and are advertised in the network using routing protocol extensions.

Authors

Rakesh Gandhi (rgandhi@cisco.com)
Clarence Filsfils (cfilsfil@cisco.com)
daniel.voyer@bell.ca (daniel.voyer@bell.ca)
Stefano Salsano (stefano.salsano@uniroma2.it)
Pier Ventre (pierluigi.ventre@cnit.it)
Mach Chen (mach.chen@huawei.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)