Source Route Based Extensible IP Network (EIPv4)
draft-diao-eipv4-01
Document | Type |
Expired Internet-Draft
(individual in int area)
Expired & archived
|
|
---|---|---|---|
Author | Diao Yongping | ||
Last updated | 2015-10-14 (Latest revision 2006-11-29) | ||
RFC stream | Internet Engineering Task Force (IETF) | ||
Intended RFC status | Proposed Standard | ||
Formats | |||
Stream | WG state | (None) | |
Document shepherd | (None) | ||
IESG | IESG state | Expired (IESG: Dead) | |
Action Holders |
(None)
|
||
Consensus boilerplate | Unknown | ||
Telechat date | (None) | ||
Responsible AD | Jari Arkko | ||
IESG note | ** No value found for 'doc.notedoc.note' ** | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
In order to resolve the problem of IP address shortage Internet society try hard and use or intend to use some technologies such as NAT/NAPT, IPv6. But the shortcoming or difficult deployment make it progress slowly. Here provides an extensible IP network realization method to exist IP version 4. Two-level extensible IP network architecture is adopted which includes public IP address domain and private IP address domain. With the position denotation of source IP node and destination IP node, IP datagram can progress through the whole extensible IP network freely using the source route based method.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)