Document Charter ADSL MIB WG (adslmib)
Last updated 1998-05-27
State Approved
WG State Concluded
IESG Responsible AD BenoƮt Claise
Charter Edit AD (None)
Send notices to (None)


The working group will define: 
  1. A set of managed objects to handle the bonding of xDSL lines 
  according to the ITU-T Recommendations G.998.1 (ATM), G.998.2 (Ethernet) 
  and G.998.3 (TDIM). A common MIB module will be developed to handle the 
  common objects and three specific MIB modules will be developed to 
  handle the three separate layer-2 technologies. Use will be made of the 
  ifStack and ifInvStack Tables defined in RFC 2863 and RFC 2864 
  respectively. Use will also be made of the ifCapStack and ifInvCapStack 
  tables as defined in RFC 5066. The Broadband forum TR-159 will be used 
  in the definition of these MIBs.
  2. The working group will develop a set of managed objects as an
  optional extension to RFC 5650 that shall provide an alternative
  approach, known as the "Vector of Profiles", for the configuration of
  DSL lines. The Vector of Profiles MIB will be based on the Broadband
  Forum TR-165 document. The ITU-T G.997.1 will also be considered in the
  definition of this extension.
  The MIB modules defined by this group will be generated using SMIv2, 
  will be consistent with the SNMP management framework, and will
  describe the relationship of the objects defined to existing MIBs such 
  as those described in other work products of this Working Group, the
  interfaces MIB, the Ethernet MIB modules and the AToM MIB.