Securing Neighbor Discovery (send) Concluded WG
Note: The data for concluded WGs is occasionally incorrect.
|WG||Name||Securing Neighbor Discovery|
|Area||Internet Area (int)|
|Dependencies||Document dependency graph (SVG)|
Charter for Working Group
Neighbor Discovery is the basic protocol by which IPv6 nodes discover
their default routers on the local link, and by which nodes on a local
link resolve IPv6 addresses to MAC layer addresses, for delivery of
packets on the local link. Neighbor Discovery is specified in RFC
2461. One of the design principles behind Neighbor Discovery is to
enable zero configuration, i.e., to allow hosts to start communicating
with other hosts at the local link and in the Internet without any
requirements for manual configuration.
RFC 2461 specifies that IPsec AH should be used to secure signaling
for Neighbor Discovery. Due to bootstrapping issues, only manual keying
works and that is impractical for most cases. This is in conflict with
the goal of Neighbor Discovery, namely to allow complete
address autoconfiguration of a node.
The objective of this working group is to define protocol support for
securing IPv6 Neighbor Discovery without requiring manual keying. The
following are charter items for the working group:
1) A threat assessment and trust model for local links will be
worked out. The threat assessment will clearly describe which
threats the Neighbor Discovery security solution(s) will address
and which are not addressed. The trust model will describe what
types of networks require what level of security solution.
Together these form a clear problem statement and a set of
2) A protocol for assuring authenticatable distribution of public keys,
that allows for example tying a public key to a node's IP address or
interface ID, and for example authenticating a router's
authorization to route, will be designed. The working group will
consider the presentation by Steve Bellovin at the SEND BOF as a
3) The use of the key distribution protocol and public key
cryptographic scheme for calculating digital signatures
in IPsec AH and/or ESP headers will be specified. IANA
may be requested to reserve one or more of the reserved
SPIs (1-255) for the protocol.
The Working Group will attempt to use well-known and existing public
key cryptographic protocols with good security properties, in order to
reduce the risk of unintended side effects, and to expedite the
completion of the work. The protocol will be designed to assure that
functions of RFC 2461 and RFC 2462 are addressed.
Specifically out of scope is IPv4 and ARP. Although ARP has similar
problems, there is a huge installed base of ARP. It seems unlikely that
any substantial fraction of that installed based would be updated
quickly enough to make a difference. On the other hand, IPv6 deployment
is still its initial stages, and changes to Neighbor Discovery are more
likely to be widely adopted, if the Working Group executes quickly
enough on its task.
|Done||Submit draft-ietf-send-cga-xx.txt and draft-ietf-send-ipsec-xx.txt to IESG for approval.|
|Done||Intermediate drafts for draft-ietf-send-cga-xx.txt and draft-ietf-send-ipsec-xx.txt submitted to selected reviewers.|
|Done||Initial draft for CGA, draft-ietf-send-cga-00.txt.|
|Done||Complete draft-ietf-send-psreq-xx.txt and send to IESG for approval.|
|Done||Complete selection of a public key scheme. Initial draft of key distribution protocol, draft-ietf-send-ipsec-00.txt.|
|Done||First draft of draft-ietf-send-psreq-00.txt, the combined Neighbor Discovery threats and trust model drafts.|