Skip to main content

Concluded WG Diameter Maintenance and Extensions (dime)

Note: The data for concluded WGs is occasionally incorrect.

WG Name Diameter Maintenance and Extensions
Acronym dime
Area Operations and Management Area (ops)
State Concluded
Charter charter-ietf-dime-07 Approved
Document dependencies
Additional resources Issue tracker, Wiki, Zulip Stream
Personnel Chairs Jouni Korhonen, Lionel Morand
Area Director Robert Wilton
Mailing list Address dime@ietf.org
To subscribe https://www.ietf.org/mailman/listinfo/dime
Archive https://mailarchive.ietf.org/arch/browse/dime/

Closing note for Working Group

Hi DIME WG, As will come as no surprise, I am closing the DIME WG. This is in an effort to transition my work to Mahesh in as clean a state as possible. Given, various emails that I have seen, and errata raised, I’m aware that folks are implementing and using Diameter. It is always nice to see when the IETF standards are adopted by industry. I would like to thank everyone involved in this work, from the chairs to the regular participants, with the WG producing 31 RFCs over the time that it has been chartered. The mailing list will remain open to allow for future discussion, resolution of errata, etc. Small maintenance work for the Diameter protocol can be taken to the OPSAWG WG, but larger work items would need the WG to be rechartered again to scope and facilitate the new work. Thanks again for your efforts. Rob

Final Charter for Working Group

The Diameter Maintenance and Extensions WG will focus on maintenance and
extensions to the Diameter protocol required to enable its use for
authentication, authorization, accounting, charging in network access,
provisioning of configuration information within the network, and for
new AAA session management uses within the extensibility rules of the
Diameter base protocol.

The DIME working group plans to address the following items:

  • Maintaining and/or progressing, along the standards track, the
    Diameter Base protocol and Diameter Applications. This includes
    extensions to Diameter Base protocol that can be considered as
    enhanced features or bug fixes.

  • Diameter application design guideline. This document will provide
    guidelines for design of Diameter extensions. It will detail when to
    consider reusing an existing application and when to develop a new
    application.

  • Protocol extensions for bulk and grouped AAA session management. The
    aim of this work is to study and standardize a solution for handling
    groups of AAA sessions within the Diameter base protocol context. The
    solution would define how to identify and handle grouped AAA sessions
    in commands and operations.

  • Diameter overload control. The aim of this work is to identify the
    limitations of the Diameter protocol level overload control provided
    by the current Diameter Base protocol. A set of requirements will be
    provided to define a new Diameter level overload control mechanism.

Additionally, Diameter-based systems require interoperability in order
to work. The working group, along with the AD, will need to evaluate any
potential extensions and require verification that the proposed
extension is needed, and is within the extensibility rules of Diameter
and AAA scope. Coordination with other IETF working groups and other
SDOs (e.g. 3GPP) will be used to ensure this.

Milestones

Date Milestone Associated documents
Aug 2017 Submit RFC4006bis to the IESG.
Oct 2016 Submit RFC4006bis as a working group document.
Jan 2016 Submit I-D 'Diameter Overload Control Rate Abatement Algorithm' to the IESG for consideration as a Proposed Standard
Aug 2013 Submit a document on 'Protocol extension for bulk and group signaling' to the IESG for consideration as a Proposed Standard

Done milestones

Date Milestone Associated documents
Done Submit 'problem statement and requirements for Diameter end-to-end security framework' to the IESG for consideration as an Informational RFC
Done Submit I-D 'Diameter Routing Message Priority' to the IESG for considerations as a Proposed Standard
Done Submit I-D 'Diameter Load Information' to the IESG for consideration as a Proposed Standard
Done Submit I-D 'Diameter Agent Overload' to the IESG for consideration as a Proposed Standard
Done Submit a document on 'Diameter Load Information' as a working group item
Done Submit a document on 'Diameter Agent Overload' as a working group item
Done Submit a document on 'Diameter Overload Control Rate Abatement Algorithm' as a working group item
Done Submit I-D 'Diameter Congestion and Filter Attributes' to the IESG for considerations as a Proposed Standard
Done Submit I-D 'Diameter Overload Control' to the IESG for consideration as a Proposed Standard
Done Submit 'problem statement and requirements for Diameter end-to-end security framework' to the IESG for consideration as an Informational RFC
Done Submit I-D 'Diameter Overload Control Requirements' to the IESG for consideration as a Informational
Done Submit I-D 'Diameter Overload Control' as a working group document. To be Standards Track RFC
Done Submit I-D 'Diameter Overload Control Requirements' as a working group document. To be Informational RFC
Done Submit a document on 'Protocol extension for bulk and group signaling' as a working group item
Done Submit 'problem statement and requirements for Diameter end-to-end security framework' as Dime working group item
Done Submit 'Diameter Support for EAP Re-authentication Protocol' to the IESG for consideration as a Proposed Standard
Done Submit 'Diameter Application Design Guidelines' to the IESG for consideration as a BCP document
Done Submit Revision of 'Diameter Network Access Server Application - RFC 4005bis' to the IESG for consideration as a Proposed Standard
Done Submit 'Realm-Based Redirection In Diameter' to the IESG for consideration as a Proposed Standard
Done Submit 'Diameter Support for Proxy Mobile IPv6 Localized Routing' to the IESG for consideration as a Proposed Standard
Done Submit 'Diameter Extended NAPTR' to the IESG for consideration as a Proposed Standard
Done Submit 'Diameter IKEv2 PSK' to the IESG for consideration as a Proposed Standard
Done Submit 'Diameter NAT Control Application' to the IESG for consideration as a Proposed Standard
Done Submit Revision of 'Diameter Network Access Server Application - RFC 4005bis' as DIME working group item
Done Submit 'Diameter Priority Attribute Value Pairs' to the IESG for consideration as a Proposed Standard
Done Submit 'Diameter Attribute-Value Pairs for Cryptographic Key Transport' to the IESG for consideration as a Proposed Standard
Done Submit Revision of 'Diameter Base Protocol' to the IESG for consideration as a Proposed Standard
Done Submit 'Diameter IKEv2 PSK' as DIME working group item
Done Submit 'Diameter Priority Attribute Value Pairs' as DIME working group item
Done Submit 'Diameter Attribute-Value Pairs for Cryptographic Key Transport' as DIME working group item
Done Submit 'Diameter Support for Proxy Mobile IPv6 Localized Routing' as DIME working group item
Done Submit 'Realm-Based Redirection In Diameter' as DIME working group item
Done Submit 'Diameter Extended NAPTR' as DIME working group item
Done Submit 'Diameter Capabilities Update' to the IESG for consideration as a Proposed Standard
Done Submit 'Diameter Base Protocol MIB' to the IESG for consideration as an Informational RFC
Done Submit 'Diameter Credit Control Application MIB' to the IESG for consideration as an Informational RFC
Done Submit 'Diameter Capabilities Update' as DIME working group item
Done Submit 'Diameter NAT Control Application' as DIME working group item
Done Submit 'Diameter User-Name and Realm Based Request Routing Clarifications' to the IESG for consideration as a Proposed Standard
Done Submit 'Diameter Proxy Mobile IPv6' to the IESG for consideration as a Proposed Standard
Done Submit 'Diameter Proxy Mobile IPv6' as DIME working group item
Done Submit 'Diameter User-Name and Realm Based Request Routing Clarifications' as DIME working group item
Done Submit 'Diameter Support for EAP Re-authentication Protocol' as DIME working group item
Done Submit 'Diameter QoS Application' to the IESG for consideration as a Proposed Standard
Done Submit 'Quality of Service Parameters for Usage with Diameter' to the IESG for consideration as a Proposed Standard.
Done Submit 'Quality of Service Attributes for Diameter' to the IESG for consideration as a Proposed Standard
Done Submit 'Diameter API' to the IESG for consideration as an Informational RFC
Done Submit the following two Diameter Mobility documents to the IESG for consideration as a Proposed Standards:* 'Diameter Mobile IPv6: Support for Home Agent to Diameter Server Interaction' * 'Diameter Mobile IPv6: Support for Network Access Server to Diameter Server Interaction'