MIB Transfer from the IETF to the IEEE 802.3 WG
Draft of message to be sent after approval:
From: The IESG <email@example.com> To: IETF-Announce <firstname.lastname@example.org> Cc: RFC Editor <email@example.com> Subject: Document Action: 'Transferring MIB Work from IETF Ethernet Interfaces and Hub MIB WG to IEEE 802.3 WG' to Informational RFC (draft-ietf-opsawg-mibs-to-ieee80231-01.txt) The IESG has approved the following document: - 'Transferring MIB Work from IETF Ethernet Interfaces and Hub MIB WG to IEEE 802.3 WG' (draft-ietf-opsawg-mibs-to-ieee80231-01.txt) as Informational RFC This document is the product of the Operations and Management Area Working Group. The IESG contact persons are Benoit Claise and Joel Jaeggli. A URL of this Internet Draft is: http://datatracker.ietf.org/doc/draft-ietf-opsawg-mibs-to-ieee80231/
Technical Summary This document records the transfer of ownership of the Ethernet- related MIB modules DOT3-OAM-MIB, SNMP-REPEATER-MIB, POWER-ETHERNET- MIB, DOT3-EPON-MIB, EtherLike-MIB, EFM-CU-MIB, ETHER-WIS and MAU-MIB from the IETF to the IEEE 802.3 Working Group. This document also describes the procedures associated with the transfer, relying heavily on RFC 4663 (which records an earlier transfer to the IEEE 802.1 Working Group) as the primary source. Working Group Summary This documents transfers that have already occurred. Document Quality The document is well written and clear. The large majority of document is simply a list / table of the IETF source document, the IEEE name and location of MIBs that we transitioned to the IEEE. Personnel Warren Kumari will be the document shepherd. Benoit Claise will be the AD.