Vendor-Identifying Vendor Options for Dynamic Host Configuration Protocol version 4 (DHCPv4)
RFC 3925

Approval announcement
Draft of message to be sent after approval:

From: The IESG <>
To: IETF-Announce <>
Cc: Internet Architecture Board <>,
    RFC Editor <>, 
    dhc mailing list <>, 
    dhc chair <>
Subject: Protocol Action: 'Vendor-Identifying Vendor Options for 
         DHCPv4' to Proposed Standard 

The IESG has approved the following document:

- 'Vendor-Identifying Vendor Options for DHCPv4 '
   <draft-ietf-dhc-vendor-04.txt> as a Proposed Standard

This document is the product of the Dynamic Host Configuration Working 

The IESG contact persons are Margaret Wasserman and Mark Townsley.

A URL of this Internet-Draft is:

Technical Summary

The DHCP options for Vendor Class and Vendor-Specific Information can
be limiting or ambiguous when a DHCP client represents multiple
vendors.  This document defines two new options, modeled on the IPv6
options for vendor class and vendor-specific information, which
contain Enterprise Numbers to remove ambiguity.

Working Group Summary

The WG agrees that these options are a useful extension to DHCPv4.
The corresponding options in DHCPv6 were based on deployment
experience with the vendor type (option 60) and vendor-specific
information (option 43) options.

Protocol Quality

The protocol in this standard is not currently implemented.  We expect
implementation in new DHCP clients, especially in dedicated devices
like DOCSIS modems and RFID readers, which may require class and
option information based on both the type of device and the vendor of
the device.  We don't have any specific information about
implementation plans.  

This document was reviewed for the IESG by Margaret Wasserman.