Internet Engineering Task Force                            K. Jaganathan
Internet-Draft                                                    L. Zhu
Intended status: Informational                                 J. Brezak
Expires: January 31, 2007                          Microsoft Corporation
                                                           July 30, 2006


    The RC4-HMAC Kerberos Encryption Types Used by Microsoft Windows
                    draft-jaganathan-rc4-hmac-03.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on January 31, 2007.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   The Microsoft Windows 2000 implementation of Kerberos introduces a
   new encryption type based on the RC4 encryption algorithm and using
   an MD5 HMAC for checksum.  This is offered as an alternative to using
   the existing DES based encryption types.

   The RC4-HMAC encryption types are used to ease upgrade of existing
   Windows NT environments, provide strong crypto (128-bit key lengths),



Jaganathan, et al.      Expires January 31, 2007                [Page 1]


Internet-Draft                  RC4-HMAC                       July 2006


   and provide exportable (meet United States government export
   restriction requirements) encryption.  This document describes the
   implementation of those encryption types.


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Key Generation . . . . . . . . . . . . . . . . . . . . . . . .  3
   3.  Basic Operations . . . . . . . . . . . . . . . . . . . . . . .  4
   4.  Checksum Types . . . . . . . . . . . . . . . . . . . . . . . .  6
   5.  Encryption Types . . . . . . . . . . . . . . . . . . . . . . .  6
   6.  Key Strength Negotiation . . . . . . . . . . . . . . . . . . .  8
   7.  GSSAPI Kerberos V5 Mechanism Type  . . . . . . . . . . . . . .  8
     7.1.  Mechanism Specific Changes . . . . . . . . . . . . . . . .  8
     7.2.  GSSAPI MIC Semantics . . . . . . . . . . . . . . . . . . . 10
     7.3.  GSSAPI WRAP Semantics  . . . . . . . . . . . . . . . . . . 12
   8.  Security Considerations  . . . . . . . . . . . . . . . . . . . 15
   9.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 15
   10. IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 16
   11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 16
     11.1. Normative References . . . . . . . . . . . . . . . . . . . 16
     11.2. Informative References . . . . . . . . . . . . . . . . . . 16
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 16
   Intellectual Property and Copyright Statements . . . . . . . . . . 18


























Jaganathan, et al.      Expires January 31, 2007                [Page 2]


Internet-Draft                  RC4-HMAC                       July 2006


1.  Introduction

   The Microsoft Windows 2000 implementation of Kerberos contains new
   encryption and checksum types for two reasons: for export reasons
   early in the development process, 56 bit DES encryption could not be
   exported, and because upon upgrade from Windows NT 4.0 to Windows
   2000, accounts will not have the appropriate DES keying material to
   do the standard DES encryption.  Furthermore, 3DES is not available
   for export, and there was a desire to use a single flavor of
   encryption in the product for both US and international products.

   As a result, there are two new encryption types and one new checksum
   type introduced in Microsoft Windows 2000.

   Note that these cryptosystems aren't intended to be complete,
   general-purpose Kerberos encryption or checksum systems as defined in
   [RFC3961]: there is no one-one mapping between the operations in this
   documents and the primitives described in [RFC3961].


2.  Key Generation

   On upgrade from existing Windows NT domains, the user accounts would
   not have a DES based key available to enable the use of DES base
   encryption types specified in [RFC4120] [RFC3961].  The key used for
   RC4-HMAC is the same as the existing Windows NT key (NT Password
   Hash) for compatibility reasons.  Once the account password is
   changed, the DES based keys are created and maintained.  Once the DES
   keys are available DES based encryption types can be used with
   Kerberos.

   The RC4-HMAC String to key function is defined as follow:

      String2Key(password)

           K = MD4(UNICODE(password))

   The RC4-HMAC keys are generated by using the Windows UNICODE version
   of the password.  Each Windows UNICODE character is encoded in
   little-endian format of 2 octets each.  Then performing an MD4
   [RFC1320] hash operation on just the UNICODE characters of the
   password (not including the terminating zero octets).

   For an account with a password of "foo", this String2Key("foo") will
   return:

           0xac, 0x8e, 0x65, 0x7f, 0x83, 0xdf, 0x82, 0xbe,
           0xea, 0x5d, 0x43, 0xbd, 0xaf, 0x78, 0x00, 0xcc



Jaganathan, et al.      Expires January 31, 2007                [Page 3]


Internet-Draft                  RC4-HMAC                       July 2006


3.  Basic Operations

   The MD5 HMAC function is defined in [RFC2104].  It is used in this
   encryption type for checksum operations.  Refer to [RFC2104] for
   details on its operation.  In this document this function is referred
   to as HMAC(Key, Data) returning the checksum using the specified key
   on the data.

   The basic MD5 hash operation is used in this encryption type and
   defined in [RFC1321].  In this document this function is referred to
   as MD5(Data) returning the checksum of the data.

   RC4 is a stream cipher licensed by RSA Data Security .  In this
   document the function is referred to as RC4(Key, Data) returning the
   encrypted data using the specified key on the data.

   These encryption types use key derivation.  With each message, the
   message type (T) is used as a component of the keying material.  This
   table summarizes the different key derivation values used in the
   various operations.  Note that these differ from the key derivations
   used in other Kerberos encryption types.  T = the message type,
   encoded as a little-endian four byte integer.





























Jaganathan, et al.      Expires January 31, 2007                [Page 4]


Internet-Draft                  RC4-HMAC                       July 2006


          1.  AS-REQ PA-ENC-TIMESTAMP padata timestamp, encrypted with
          the client key (T=1)
          2.  AS-REP Ticket and TGS-REP Ticket (includes TGS session key
          or application session key), encrypted with the service key
          (T=2)
          3.  AS-REP encrypted part (includes TGS session key or
          application session key), encrypted with the client key (T=8)
          4.  TGS-REQ KDC-REQ-BODY AuthorizationData, encrypted with the
          TGS session key (T=4)
          5.  TGS-REQ KDC-REQ-BODY AuthorizationData, encrypted with the
          TGS authenticator subkey (T=5)
          6.  TGS-REQ PA-TGS-REQ padata AP-REQ Authenticator cksum,
          keyed with the TGS session key (T=6)
          7.  TGS-REQ PA-TGS-REQ padata AP-REQ Authenticator (includes
          TGS authenticator subkey), encrypted with the TGS session key
           T=7)
          8.  TGS-REP encrypted part (includes application session key),
          encrypted with the TGS session key (T=8)
          9.  TGS-REP encrypted part (includes application session key),
          encrypted with the TGS authenticator subkey (T=8)
          10.  AP-REQ Authenticator cksum, keyed with the application
          session key (T=10)
          11.  AP-REQ Authenticator (includes application authenticator
          subkey), encrypted with the application session key (T=11)
          12.  AP-REP encrypted part (includes application session
          subkey), encrypted with the application session key (T=12)
          13.  KRB-PRIV encrypted part, encrypted with a key chosen by
          the application. Also for data encrypted with GSS Wrap (T=13)
          14.  KRB-CRED encrypted part, encrypted with a key chosen by
          the application (T=14)
          15.  KRB-SAFE cksum, keyed with a key chosen by the
          application. Also for data signed in GSS MIC (T=15)

          Relative to RFC-1964 key uses:

         T = 0 in the generation of sequence number for the MIC token
         T = 0 in the generation of sequence number for the WRAP token
         T = 0 in the generation of encrypted data for the WRAPPED token

   All strings in this document are ASCII unless otherwise specified.
   The lengths of ASCII encoded character strings include the trailing
   terminator character (0).  The concat(a,b,c,...) function will return
   the logical concatenation (left to right) of the values of the
   arguments.  The nonce(n) function returns a pseudo-random number of
   "n" octets.






Jaganathan, et al.      Expires January 31, 2007                [Page 5]


Internet-Draft                  RC4-HMAC                       July 2006


4.  Checksum Types

   There is one checksum type used in this encryption type.  The
   Kerberos constant for this type is:

           #define KERB_CHECKSUM_HMAC_MD5 (-138)

      The function is defined as follows:

      K - is the Key
      T - the message type, encoded as a little-endian four byte integer

      CHKSUM(K, T, data)

           Ksign = HMAC(K, "signaturekey")  //includes zero octet at end
           tmp = MD5(concat(T, data))
           CHKSUM = HMAC(Ksign, tmp)


5.  Encryption Types

   There are two encryption types used in these encryption types.  The
   Kerberos constants for these types are:

           #define KERB_ETYPE_RC4_HMAC             23
           #define KERB_ETYPE_RC4_HMAC_EXP         24

   The basic encryption function is defined as follow:

     T = the message type, encoded as a little-endian four byte integer.

           OCTET L40[14] = "fortybits";

      The header field on the encrypted data in KDC messages is:

           typedef struct _RC4_MDx_HEADER {
               OCTET Checksum[16];
               OCTET Confounder[8];
           } RC4_MDx_HEADER, *PRC4_MDx_HEADER;


           ENCRYPT (K, export, T, data)
           {
               struct EDATA {
                   struct HEADER {
                           OCTET Checksum[16];
                           OCTET Confounder[8];
                   } Header;



Jaganathan, et al.      Expires January 31, 2007                [Page 6]


Internet-Draft                  RC4-HMAC                       July 2006


                   OCTET Data[0];
               } edata;

               if (export){
                   *((DWORD *)(L40+10)) = T;
                   HMAC (K, L40, 10 + 4, K1);
               }
               else
               {
                   HMAC (K, &T, 4, K1);
               }
               memcpy (K2, K1, 16);
               if (export) memset (K1+7, 0xAB, 9);

               nonce (edata.Confounder, 8);
               memcpy (edata.Data, data);

               edata.Checksum = HMAC (K2, edata);
               K3 = HMAC (K1, edata.Checksum);

               RC4 (K3, edata.Confounder);
               RC4 (K3, data.Data);
           }

           DECRYPT (K, export, T, edata)
           {
               // edata looks like
               struct EDATA {
                   struct HEADER {
                           OCTET Checksum[16];
                           OCTET Confounder[8];
                   } Header;
                   OCTET Data[0];
               } edata;

               if (export){
                   *((DWORD *)(L40+10)) = T;
                   HMAC (K, L40, 14, K1);
               }
               else
               {
                   HMAC (K, &T, 4, K1);
               }
               memcpy (K2, K1, 16);
               if (export) memset (K1+7, 0xAB, 9);

               K3 = HMAC (K1, edata.Checksum);




Jaganathan, et al.      Expires January 31, 2007                [Page 7]


Internet-Draft                  RC4-HMAC                       July 2006


               RC4 (K3, edata.Confounder);
               RC4 (K3, edata.Data);


               // verify generated and received checksums
             checksum = HMAC (K2, concat(edata.Confounder, edata.Data));
               if (checksum != edata.Checksum)
                   printf("CHECKSUM ERROR  !!!!!!\n");
           }

   The KDC message is encrypted using the ENCRYPT function not including
   the Checksum in the RC4_MDx_HEADER.

   The character constant "fortybits" evolved from the time when a 40-
   bit key length was all that was exportable from the United States.
   It is now used to recognize that the key length is of "exportable"
   length.  In this description, the key size is actually 56-bits.

   The pseudo-random operation [RFC3961] for both enctypes above is
   defined as follows:

           pseudo-random(K, S) = HMAC-SHA1(K, S)

   where K is the protocol key and S is the input octet string.  HMAC-
   SHA1 is defined in [RFC2104] and the output of HMAC-SHA1 is the 20-
   octet digest.


6.  Key Strength Negotiation

   A Kerberos client and server can negotiate over key length if they
   are using mutual authentication.  If the client is unable to perform
   full strength encryption, it may propose a key in the "subkey" field
   of the authenticator, using a weaker encryption type.  The server
   must then either return the same key or suggest its own key in the
   subkey field of the AP reply message.  The key used to encrypt data
   is derived from the key returned by the server.  If the client is
   able to perform strong encryption but the server is not, it may
   propose a subkey in the AP reply without first being sent a subkey in
   the authenticator.


7.  GSSAPI Kerberos V5 Mechanism Type

7.1.   Mechanism Specific Changes

   The GSSAPI per-message tokens also require new checksum and
   encryption types.  The GSS-API per-message tokens are adapted to



Jaganathan, et al.      Expires January 31, 2007                [Page 8]


Internet-Draft                  RC4-HMAC                       July 2006


   support these new encryption types.  See [RFC1964] Section 1.2.2.

   The only support quality of protection is:

         #define GSS_KRB5_INTEG_C_QOP_DEFAULT    0x0

   When using this RC4 based encryption type, the sequence number is
   always sent in big-endian rather than little-endian order.

   The Windows 2000 implementation also defines new GSSAPI flags in the
   initial token passed when initializing a security context.  These
   flags are passed in the checksum field of the authenticator.  See
   [RFC1964] Section 1.1.1.

   GSS_C_DCE_STYLE - This flag was added for use with Microsoft's
   implementation of DCE RPC, which initially expected three legs of
   authentication.  Setting this flag causes an extra AP reply to be
   sent from the client back to the server after receiving the server's
   AP reply.  In addition, the context negotiation tokens do not have
   GSSAPI per message tokens - they are raw AP messages that do not
   include object identifiers.

           #define GSS_C_DCE_STYLE                 0x1000

   GSS_C_IDENTIFY_FLAG - This flag allows the client to indicate to the
   server that it should only allow the server application to identify
   the client by name and ID, but not to impersonate the client.

           #define GSS_C_IDENTIFY_FLAG             0x2000

   GSS_C_EXTENDED_ERROR_FLAG - Setting this flag indicates that the
   client wants to be informed of extended error information.  In
   particular, Windows 2000 status codes may be returned in the data
   field of a Kerberos error message.  This allows the client to
   understand a server failure more precisely.  In addition, the server
   may return errors to the client that are normally handled at the
   application layer in the server, in order to let the client try to
   recover.  After receiving an error message, the client may attempt to
   resubmit an AP request.

           #define GSS_C_EXTENDED_ERROR_FLAG       0x4000

   These flags are only used if a client is aware of these conventions
   when using the SSPI on the Windows platform; they are not generally
   used by default.

   When NetBIOS addresses are used in the GSSAPI, they are identified by
   the GSS_C_AF_NETBIOS value.  This value is defined as:



Jaganathan, et al.      Expires January 31, 2007                [Page 9]


Internet-Draft                  RC4-HMAC                       July 2006


           #define GSS_C_AF_NETBIOS                0x14

   NetBios addresses are 16-octet addresses typically composed of 1 to
   15 characters, trailing blank (ASCII char 20) filled, with a 16-th
   octet of 0x0.

7.2.   GSSAPI MIC Semantics

   The GSSAPI checksum type and algorithm is defined in Section 5.  Only
   the first 8 octets of the checksum are used.  The resulting checksum
   is stored in the SGN_CKSUM field .  See [RFC1964] Section 1.2 for
   GSS_GetMIC() and GSS_Wrap(conf_flag=FALSE).

   The GSS_GetMIC token has the following format:

        Byte no         Name        Description
        0..1           TOK_ID     Identification field.
                                  Tokens emitted by GSS_GetMIC() contain
                                  the hex value 01 01 in this field.
        2..3           SGN_ALG    Integrity algorithm indicator.
                                  11 00 - HMAC
        4..7           Filler     Contains ff ff ff ff
        8..15          SND_SEQ    Sequence number field.
        16..23         SGN_CKSUM  Checksum of "to-be-signed data",
                                  calculated according to algorithm
                                  specified in SGN_ALG field.

   The MIC mechanism used for GSS MIC based messages is as follow:

           GetMIC(Kss, direction, export, seq_num, data)
           {
                   struct Token {
                          struct Header {
                                 OCTET TOK_ID[2];
                                 OCTET SGN_ALG[2];
                                 OCTET Filler[4];
                            };
                          OCTET SND_SEQ[8];
                          OCTET SGN_CKSUM[8];
                   } Token;


                   Token.TOK_ID = 01 01;
                   Token.SGN_SLG = 11 00;
                   Token.Filler = ff ff ff ff;

                   // Create the sequence number




Jaganathan, et al.      Expires January 31, 2007               [Page 10]


Internet-Draft                  RC4-HMAC                       July 2006


                   if (direction == sender_is_initiator)
                   {
                           memset(Token.SEND_SEQ+4, 0xff, 4)
                   }
                   else if (direction == sender_is_acceptor)
                   {
                           memset(Token.SEND_SEQ+4, 0, 4)
                   }
                   Token.SEND_SEQ[0] = (seq_num & 0xff000000) >> 24;
                   Token.SEND_SEQ[1] = (seq_num & 0x00ff0000) >> 16;
                   Token.SEND_SEQ[2] = (seq_num & 0x0000ff00) >> 8;
                   Token.SEND_SEQ[3] = (seq_num & 0x000000ff);

                   // Derive signing key from session key

                   Ksign = HMAC(Kss, "signaturekey");
                                     // length includes terminating null

                   // Generate checksum of message - SGN_CKSUM
                   //   Key derivation salt = 15

                   Sgn_Cksum = MD5((int32)15, Token.Header, data);

                   // Save first 8 octets of HMAC Sgn_Cksum

                   Sgn_Cksum = HMAC(Ksign, Sgn_Cksum);
                   memcpy(Token.SGN_CKSUM, Sgn_Cksum, 8);

                   // Encrypt the sequence number

                   // Derive encryption key for the sequence number
                   //   Key derivation salt = 0

                   if (exportable)
                   {
                           Kseq = HMAC(Kss, "fortybits", (int32)0);
                                        // len includes terminating null
                           memset(Kseq+7, 0xab, 7)
                   }
                   else
                   {
                            Kseq = HMAC(Kss, (int32)0);
                   }
                   Kseq = HMAC(Kseq, Token.SGN_CKSUM);

                   // Encrypt the sequence number

                   RC4(Kseq, Token.SND_SEQ);



Jaganathan, et al.      Expires January 31, 2007               [Page 11]


Internet-Draft                  RC4-HMAC                       July 2006


           }

7.3.   GSSAPI WRAP Semantics

   There are two encryption keys for GSSAPI message tokens, one that is
   128 bits in strength, and one that is 56 bits in strength as defined
   in Section 6.

   All padding is rounded up to 1 byte.  One byte is needed to say that
   there is 1 byte of padding.  The DES based mechanism type uses 8 byte
   padding.  See [RFC1964] Section 1.2.2.3.

   The RC4-HMAC GSS_Wrap() token has the following format:


      Byte no          Name         Description
        0..1           TOK_ID       Identification field.
                                    Tokens emitted by GSS_Wrap() contain
                                    the hex value 02 01 in this field.
        2..3           SGN_ALG      Checksum algorithm indicator.
                                    11 00 - HMAC
        4..5           SEAL_ALG     ff ff - none
                                    00 00 - DES-CBC
                                    10 00 - RC4
        6..7           Filler       Contains ff ff
        8..15          SND_SEQ      Encrypted sequence number field.
        16..23         SGN_CKSUM    Checksum of plaintext padded data,
                                    calculated according to algorithm
                                    specified in SGN_ALG field.
        24..31         Confounder   Random confounder
        32..last       Data         encrypted or plaintext padded data

   The encryption mechanism used for GSS wrap based messages is as
   follow:


           WRAP(Kss, encrypt, direction, export, seq_num, data)
           {
                   struct Token {          // 32 octets
                          struct Header {
                                 OCTET TOK_ID[2];
                                 OCTET SGN_ALG[2];
                                 OCTET SEAL_ALG[2];
                                 OCTET Filler[2];
                          };
                          OCTET SND_SEQ[8];
                          OCTET SGN_CKSUM[8];
                            OCTET Confounder[8];



Jaganathan, et al.      Expires January 31, 2007               [Page 12]


Internet-Draft                  RC4-HMAC                       July 2006


                   } Token;


                   Token.TOK_ID = 02 01;
                   Token.SGN_SLG = 11 00;
                   Token.SEAL_ALG = (no_encrypt)? ff ff : 10 00;
                   Token.Filler = ff ff;

                   // Create the sequence number

                   if (direction == sender_is_initiator)
                   {
                           memset(&Token.SEND_SEQ[4], 0xff, 4)
                   }
                   else if (direction == sender_is_acceptor)
                   {
                           memset(&Token.SEND_SEQ[4], 0, 4)
                   }
                   Token.SEND_SEQ[0] = (seq_num & 0xff000000) >> 24;
                   Token.SEND_SEQ[1] = (seq_num & 0x00ff0000) >> 16;
                   Token.SEND_SEQ[2] = (seq_num & 0x0000ff00) >> 8;
                   Token.SEND_SEQ[3] = (seq_num & 0x000000ff);

                   // Generate random confounder

                   nonce(&Token.Confounder, 8);

                   // Derive signing key from session key

                   Ksign = HMAC(Kss, "signaturekey");

                   // Generate checksum of message -
                   //  SGN_CKSUM + Token.Confounder
                   //   Key derivation salt = 15

                   Sgn_Cksum = MD5((int32)15, Token.Header,
                                   Token.Confounder);

                   // Derive encryption key for data
                   //   Key derivation salt = 0

                   for (i = 0; i < 16; i++) Klocal[i] = Kss[i] ^ 0xF0;
                                                           // XOR
                   if (exportable)
                   {
                           Kcrypt = HMAC(Klocal, "fortybits", (int32)0);
                                       // len includes terminating null
                           memset(Kcrypt+7, 0xab, 7);



Jaganathan, et al.      Expires January 31, 2007               [Page 13]


Internet-Draft                  RC4-HMAC                       July 2006


                   }
                   else
                   {
                           Kcrypt = HMAC(Klocal, (int32)0);
                     }

                   // new encryption key salted with seq

                   Kcrypt = HMAC(Kcrypt, (int32)seq);

                   // Encrypt confounder (if encrypting)

                   if (encrypt)
                           RC4(Kcrypt, Token.Confounder);

                   // Sum the data buffer

                   Sgn_Cksum += MD5(data);         // Append to checksum

                   // Encrypt the data (if encrypting)

                   if (encrypt)
                           RC4(Kcrypt, data);

                   // Save first 8 octets of HMAC Sgn_Cksum

                   Sgn_Cksum = HMAC(Ksign, Sgn_Cksum);
                   memcpy(Token.SGN_CKSUM, Sgn_Cksum, 8);

                   // Derive encryption key for the sequence number
                   //   Key derivation salt = 0

                   if (exportable)
                   {
                           Kseq = HMAC(Kss, "fortybits", (int32)0);
                                       // len includes terminating null
                           memset(Kseq+7, 0xab, 7)
                   }
                   else
                   {
                           Kseq = HMAC(Kss, (int32)0);
                   }
                   Kseq = HMAC(Kseq, Token.SGN_CKSUM);

                   // Encrypt the sequence number

                   RC4(Kseq, Token.SND_SEQ);




Jaganathan, et al.      Expires January 31, 2007               [Page 14]


Internet-Draft                  RC4-HMAC                       July 2006


                   // Encrypted message = Token + Data
           }

   The character constant "fortybits" evolved from the time when a 40-
   bit key length was all that was exportable from the United States.
   It is now used to recognize that the key length is of "exportable"
   length.  In this description, the key size is actually 56-bits.


8.  Security Considerations

   Care must be taken in implementing these encryption types because
   they use a stream cipher.  If a different IV is not used in each
   direction when using a session key, the encryption is weak.  By using
   the sequence number as an IV, this is avoided.

   There are two classes of attack on RC4 described in [MIRONOV].
   Strong distinguishers distinguish an RC4 keystream from randomness at
   the start of the stream.  Weak distinguishers can operate on any part
   of the keystream, and the best ones, described in [FMcG] and
   [MANTIN05], can exploit data from multiple, different keystreams.  A
   consequence of these is that encrypting the same data (for instance,
   a password) sufficiently many times in separate RC4 keystreams can be
   sufficient to leak information to an adversary.  The encryption types
   defined in this document defend against these by constructing a new
   key stream for every message.  However, it is RECOMMENDED not to use
   the RC4 encryption types defined in this document for high-volume
   connections.

   Weaknesses in MD4 [BOER91] were demonstrated by Den Boer and
   Bosselaers in 1991.  In August 2004, Xiaoyun Wang et al reported MD4
   collisions generated using hand calculation [WANG04].
   Implementations based on Wang's algorithm can find collisions in real
   time.  However, the intended usage of MD4 described in this document
   does not rely on the collision-resistant property of MD4.
   Futhermore, MD4 is always used in the context of a keyed hash in this
   document.  Although no evidence has suggested keyed MD4 hashes are
   vulnerable to collision-based attacks, no study has directly proved
   that the HMAC-MD4 is secure: the existing study simply assumed that
   the hash function used in HMAC is collision proof.  It is thus
   RECOMMENDED not to use the RC4 encryption types defined in this
   document if alternative stronger encryption types, such as aes256-
   cts-hmac-sha1-96 [RFC3962], are available.


9.  Acknowledgements

   The authors wish to thank Sam Hartman, Ken Raeburn and Qunli Li for



Jaganathan, et al.      Expires January 31, 2007               [Page 15]


Internet-Draft                  RC4-HMAC                       July 2006


   their insightful comments.


10.  IANA Considerations

   This document has no actions for IANA.


11.  References

11.1.  Normative References

   [RFC1320]  Rivest, R., "The MD4 Message-Digest Algorithm", RFC 1320,
              April 1992.

   [RFC1321]  Rivest, R., "The MD5 Message-Digest Algorithm", RFC 1321,
              April 1992.

   [RFC1964]  Linn, J., "The Kerberos Version 5 GSS-API Mechanism",
              RFC 1964, June 1996.

   [RFC2104]  Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed-
              Hashing for Message Authentication", RFC 2104,
              February 1997.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3961]  Raeburn, K., "Encryption and Checksum Specifications for
              Kerberos 5", RFC 3961, February 2005.

   [RFC3962]  Raeburn, K., "Advanced Encryption Standard (AES)
              Encryption for Kerberos 5", RFC 3962, February 2005.

   [RFC4120]  Neuman, C., Yu, T., Hartman, S., and K. Raeburn, "The
              Kerberos Network Authentication Service (V5)", RFC 4120,
              July 2005.

11.2.  Informative References


Jaganathan, et al.      Expires January 31, 2007               [Page 16]


Internet-Draft                  RC4-HMAC                       July 2006


   [BOER91]   Boer, D. and A. Bosselaers, "An Attack on the Last Two
              Rounds of MD4",
              http://citeseer.ist.psu.edu/denboer91attack.html, 1991.

   [FMcG]     Fluhrer, S. and D. McGrew, "Statistical Analysis of the
              Alleged RC4 Keystream Generator", Fast Software
              Encryption:  7th International Workshop, FSE 2000, April
              2000, <http://www.mindspring.com/~dmcgrew/rc4-03.pdf>.

   [MANTIN01] Mantin, I., "Analysis of the Stream Cipher RC4", M.Sc.
              Thesis, Weizmann Institute of Science, 2001, <http://
              www.wisdom.weizmann.ac.il/~itsik/RC4/Papers/Mantin1.zip>.

   [MIRONOV]  Mironov, I., "(Not So) Random Shuffles of RC4", Advances
              in Cryptology -- CRYPTO 2002: 22nd Annual International
              Cryptology Conference, August 2002,
              <http://eprint.iacr.org/2002/067.pdf>.

   [MANTIN05] Mantin, I., "Predicting and Distinguishing Attacks on RC4
              Keystream Generator", Advances in Cryptology -- EUROCRYPT
              2005: 24th Annual International Conference on the Theory
              and Applications of Cryptographic Techniques, May 2005.

   [WANG04]   Wang, X., Lai, X., Feng, D., Chen H., and X. Yu,
              "Cryptanalysis of Hash functions MD4 and RIPEMD",
              http://www.infosec.sdu.edu.cn/paper/md4-ripemd-attck.pdf,
              Augest, 2004.



Authors' Addresses

   Karthik Jaganathan
   Microsoft Corporation
   One Microsoft Way
   Redmond, WA  98052
   US

   Email: karthikj@microsoft.com


   Larry Zhu
   Microsoft Corporation
   One Microsoft Way
   Redmond, WA  98052
   US

   Email: lzhu@microsoft.com


   John Brezak
   Microsoft Corporation
   One Microsoft Way
   Redmond, WA  98052
   US

   Email: jbrezak@microsoft.com








Jaganathan, et al.      Expires January 31, 2007               [Page 17]


Internet-Draft                  RC4-HMAC                       July 2006


Full Copyright Statement

   Copyright (C) The Internet Society (2006).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Acknowledgment

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).





Jaganathan, et al.      Expires January 31, 2007               [Page 18]