PCE Working Group                                               F. Zhang
Internet-Draft                                                   Q. Zhao
Intended status: Standards Track                                  Huawei
Expires: August 7, 2019                              O. Gonzalez de Dios
                                                          Telefonica I+D
                                                             R. Casellas
                                                                    CTTC
                                                                 D. King
                                                      Old Dog Consulting
                                                        February 6, 2019


Extensions to Path Computation Element Communication Protocol (PCEP) for
              Hierarchical Path Computation Elements (PCE)
                 draft-ietf-pce-hierarchy-extensions-09

Abstract

   The Hierarchical Path Computation Element (H-PCE) architecture is
   defined in RFC 6805.  It provides a mechanism to derive an optimum
   end-to-end path in a multi-domain environment by using a hierarchical
   relationship between domains to select the optimum sequence of
   domains and optimum paths across those domains.

   This document defines extensions to the Path Computation Element
   Protocol (PCEP) to support Hierarchical PCE procedures.


Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on August 7, 2019.


Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

Zhang, et al.           Expires August, 2019                   [Page 1]


Internet-Draft          PCEP Extensions for H-PCE       February   2019

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .3
     1.1.  Scope . . . . . . . . . . . . . . . . . . . . . . . . . .4
     1.2.  Terminology . . . . . . . . . . . . . . . . . . . . . . .5
     1.3.  Requirements Language . . . . . . . . . . . . . . . . . .5
   2.  Requirements for H-PCE  . . . . . . . . . . . . . . . . . . .5
     2.1.  Path Computation Request  . . . . . . . . . . . . . . . .6
       2.1.1.  Qualification of PCEP Requests  . . . . . . . . . . .6
       2.1.2.  Multi-domain Objective Functions  . . . . . . . . . .6
       2.1.3.  Multi-domain Metrics  . . . . . . . . . . . . . . . .7
     2.2.  Parent PCE Capability Advertisement . . . . . . . . . . .7
     2.3.  PCE Domain Identification . . . . . . . . . . . . . . . .7
     2.4.  Domain Diversity  . . . . . . . . . . . . . . . . . . . .7
   3.  PCEP Extensions . . . . . . . . . . . . . . . . . . . . . . .8
     3.1   Applicability to PCC-PCE Communications . . . . . . . . .8
     3.2.  OPEN Object . . . . . . . . . . . . . . . . . . . . . . .8
       3.2.1.  H-PCE Capability TLV  . . . . . . . . . . . . . . . .8
       3.2.1.1 Backwards Compatibility . . . . . . . . . . . . . . .9
       3.2.2.  Domain-ID TLV . . . . . . . . . . . . . . . . . . . .10
     3.2.  RP Object . . . . . . . . . . . . . . . . . . . . . . . .11
       3.2.1.  H-PCE-FLAG TLV  . . . . . . . . . . . . . . . . . . .11
       3.2.2.  Domain-ID TLV . . . . . . . . . . . . . . . . . . . .12
     3.3.  Objective Functions . . . . . . . . . . . . . . . . . . .12
       3.3.1.  OF Codes  . . . . . . . . . . . . . . . . . . . . . .12
       3.3.2.  OF Object . . . . . . . . . . . . . . . . . . . . . .13
     3.4.  Metric Object . . . . . . . . . . . . . . . . . . . . . .14
     3.5.  SVEC Object . . . . . . . . . . . . . . . . . . . . . . .15
     3.6.  PCEP-ERROR Object . . . . . . . . . . . . . . . . . . . .15
       3.6.1.  Hierarchy PCE Error-Type  . . . . . . . . . . . . . .15
     3.7.  NO-PATH Object  . . . . . . . . . . . . . . . . . . . . .15
   4.  H-PCE Procedures  . . . . . . . . . . . . . . . . . . . . . .16
     4.1.  OPEN Procedure between Child PCE and Parent PCE . . . . .16
     4.2.  Procedure to Obtain Domain Sequence . . . . . . . . . . .17
   5.  Error Handling  . . . . . . . . . . . . . . . . . . . . . . .17
   6.  Manageability Considerations  . . . . . . . . . . . . . . . .18
     6.1.  Control of Function and Policy  . . . . . . . . . . . . .18
       6.1.1.  Child PCE . . . . . . . . . . . . . . . . . . . . . .19
       6.1.2.  Parent PCE  . . . . . . . . . . . . . . . . . . . . .18


Zhang, et al.           Expires August, 2019                   [Page 2]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


       6.1.3.  Policy Control  . . . . . . . . . . . . . . . . . . .19
     6.2.  Information and Data Models . . . . . . . . . . . . . . .19
     6.3.  Liveness Detection and Monitoring . . . . . . . . . . . .19
     6.4.  Verify Correct Operations . . . . . . . . . . . . . . . .19
     6.5.  Requirements On Other Protocols . . . . . . . . . . . . .20
     6.6.  Impact On Network Operations  . . . . . . . . . . . . . .20
   7.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .20
     7.1.  PCEP TLV Type Indicators  . . . . . . . . . . . . . . . .20
     7.2.  H-PCE-CAPABILITY TLV Flags  . . . . . . . . . . . . . . .20
     7.3.  Domain-ID TLV Domain type . . . . . . . . . . . . . . . .21
     7.4.  H-PCE-FLAG TLV Flags  . . . . . . . . . . . . . . . . . .21
     7.5.  OF Codes  . . . . . . . . . . . . . . . . . . . . . . . .22
     7.6.  METRIC Types  . . . . . . . . . . . . . . . . . . . . . .22
     7.7.  New PCEP Error-Types and Values . . . . . . . . . . . . .22
     7.8.  New NO-PATH-VECTOR TLV Bit Flag . . . . . . . . . . . . .23
     7.9.  SVEC Flag . . . . . . . . . . . . . . . . . . . . . . . .23
     7.10.  NO-PATH VECTOR TLV Bit Flag. . . . . . . . . . . . . . .23
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .23
   9. Contributing Authors.  . . . . . . . . . . . . . . . . . . . .24
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .24
     10.1.  Normative References . . . . . . . . . . . . . . . . . .24
     10.2.  Informative References . . . . . . . . . . . . . . . . .26
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .28
   Appendix  . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
    A1.  Implementation Status . . . . . . . . . . . . . . . . . . .29
     A1.1.  Inter-layer traffic engineering with H-PCE . . . . . . .29
     A1.2.  Telefonica Netphony (Open Source PCE)  . . . . . . . . .31
     A1.3.  H-PCE Proof of Concept developed by Huawei . . . . . . .32

1.  Introduction

   The Path Computation Element communication Protocol (PCEP) provides
   a mechanism for Path Computation Elements (PCEs) and Path Computation
   Clients (PCCs) to exchange requests for path computation and
   responses that provide computed paths.

   The capability to compute the routes of end-to-end inter-domain MPLS
   Traffic Engineering (MPLS-TE) and GMPLS Label Switched Paths (LSPs)
   is expressed as requirements in [RFC4105] and [RFC4216].  This
   capability may be realized by a PCE [RFC4655].  The methods for
   establishing and controlling inter-domain MPLS-TE and GMPLS LSPs are
   documented in [RFC4726].

   [RFC6805] describes a Hierarchical PCE (H-PCE) architecture which can
   be used for computing end-to-end paths for inter-domain MPLS Traffic
   Engineering (TE) and GMPLS Label Switched Paths (LSPs).

   Within the hierarchical PCE architecture, the parent PCE is used to


Zhang, et al.           Expires August, 2019                   [Page 3]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   compute a multi-domain path based on the domain connectivity
   information.  A child PCE may be responsible for a single domain or
   multiple domains, it is used to compute the intra-domain path based
   on its own domain topology information.

   The H-PCE end-to-end domain path computation procedure is described
   below:

   o  A path computation client (PCC) sends the inter-domain path
      computation requests to the child PCE responsible for its domain;

   o  The child PCE forwards the request to the parent PCE;

   o  The parent PCE computes the likely domain paths from the ingress
      domain to the egress domain;

   o  The parent PCE sends the intra-domain path computation requests
      (between the domain border nodes) to the child PCEs which are
      responsible for the domains along the domain path;

   o  The child PCEs return the intra-domain paths to the parent PCE;

   o  The parent PCE constructs the end-to-end inter-domain path based
      on the intra-domain paths;

   o  The parent PCE returns the inter-domain path to the child PCE;

   o  The child PCE forwards the inter-domain path to the PCC.

   In addition, the parent PCE may be requested to provide only the
   sequence of domains to a child PCE so that alternative inter-domain
   path computation procedures, including Per Domain (PD) [RFC5152] and
   Backwards Recursive Path Computation (BRPC) [RFC5441] may be used.

   This document defines the PCEP extensions for the purpose of
   implementing Hierarchical PCE procedures, which are described in
   [RFC6805].

1.1.  Scope

   The following functions are out of scope of this document.

   o  Determination of Destination Domain (section 4.5 of [RFC6805]).
      This could be done

      *  via a collection of reachability information from child domain;

      *  via requests to the child PCEs to discover if they contain the


Zhang, et al.           Expires August, 2019                   [Page 4]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


         destination node;

      *  or any other methods.

   o  Parent Traffic Engineering Database (TED) methods (section 4.4 of
      [RFC6805]). This could be done via

      *  Yang based management interfaces

      *  BGP-LS [RFC7752]

      *  Future extension to PCEP (such as PCEP-LS)

   o  Learning of Domain connectivity and boundary nodes (BN) addresses.
   This could be done via

      *  Yang based management interfaces

      *  BGP-LS [RFC7752]

      *  Future extension to PCEP (such as PCEP-LS)

   o  Stateful PCE Operations.  (Refer [I-D.ietf-pce-stateful-hpce])

   The hierarchical relationship model is described in [RFC6805]. It is
   applicable to environments with small groups of domains where
   visibility from the ingress LSRs is limited.  As highlighted in
   [RFC7399] applying the hierarchical PCE model to large groups of
   domains such as the Internet is not considered feasible or desirable.

1.2.  Terminology

   This document uses the terminology defined in [RFC4655], [RFC5440]
   and the additional terms defined in Section 1.4 of [RFC6805].

1.3.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

2.  Requirements for H-PCE

   This section compiles the set of requirements to the PCEP extension
   to support the H-PCE architecture and procedures.



Zhang, et al.           Expires August, 2019                   [Page 5]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   [RFC6805] identifies high-level requirements of PCEP extensions
   required to support the hierarchical PCE model.

2.1.  Path Computation Request

   The Path Computation Request (PCReq) [RFC5440] messages are used by
   a PCC or a PCE to make a path computation request to a PCE.  In order
   to achieve the full functionality of the H-PCE procedures, the PCReq
   message needs to include:

   o  Qualification of PCE Requests (Section 4.8.1. of [RFC6805]);

   o  Multi-domain Objective Functions (OF);

   o  Multi-domain Metrics.

2.1.1.  Qualification of PCEP Requests

   As described in Section 4.8.1 of [RFC6805], the H-PCE architecture
   introduces new request qualifications, which are:

   o  The ability for a child PCE to indicate that a path computation
      request sent to a parent PCE should be satisfied by a domain
      sequence only, that is, not by a full end-to-end path. This allows
      the child PCE to initiate a per-domain (PD) [RFC5152] or a
      backward recursive path computation (BRPC) [RFC5441].

   o  As stated in [RFC6805], Section 4.5, if a PCC knows the egress
      domain, it can supply this information as the path computation
      request.  The PCC may also want to specify the destination domain
      information in a PCEP request, if it is known.

   o  An inter domain path computed by parent PCE should be capable of
      disallowing specific domain re-entry.

2.1.2.  Multi-domain Objective Functions

   For H-PCE inter-domain path computation, there are three new
   Objective Functions defined in this document:

   o Minimize the number of Transit Domains (MTD)
   o Minimize the number of border nodes (MBN)
   o Minimize the number of Common Transit Domains (MCTD)

   The PCC may specify the multi-domain Objective Function code to
   use when requesting inter-domain path computation, it may also
   include intra-domain OFs, such as Minimum Cost Path (MCP) [RFC5441],
   which must be considered by participating child PCEs.


Zhang, et al.           Expires August, 2019                   [Page 6]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


2.1.3.  Multi-domain Metrics

   For inter-domain path computation, there are several path metrics of
   interest.

   o  Domain count (number of domains crossed);

   o  Border Node count.

   A PCC may be able to limit the number of domains crossed by applying
   a limit on these metrics.  Details in Section 3.4.

2.2.  Parent PCE Capability Advertisement

   A PCEP Speaker (Parent PCE or Child PCE) that supports and wishes
   to use the procedures described in this document must advertise
   the fact and negotiate its role with its PCEP peers. It does this
   using the "H-PCE Capability" TLV, described in Section 3.2.1, in the
   OPEN Object to advertise its support for PCEP extensions for H-PCE
   Capability.

   During the PCEP session establishment procedure, the child PCE needs
   to be capable of indicating to the parent PCE whether it requests the
   parent PCE capability or not.

2.3.  PCE Domain Identification

   A PCE domain is a single domain with an associated PCE.  Although it
   is possible for a PCE to manage multiple domains simultaneously.  The
   PCE domain could be an IGP area or AS.

   The PCE domain identifiers MAY be provided during the PCEP session
   establishment procedure.

2.4.  Domain Diversity

   In a multi-domain environment, Domain Diversity is defined in
   [RFC6805].  A pair of paths is domain-diverse if they do not
   traverse any of the same transit domains.  Domain diversity may be
   maximized for a pair of paths by selecting paths that have the
   smallest number of shared domains.  Path computation should
   facilitate the selection of domain diverse paths as a way to reduce
   the risk of shared failure and automatically helps to ensure path
   diversity for a pair of LSPs.

   The main motivation behind domain diversity is to avoid fate sharing,
   but it can also be because of some geo-political reasons and
   commercial relationships that would require domain diversity.  For


Zhang, et al.           Expires August, 2019                   [Page 7]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   example, a pair of paths should choose different transit Autonomous
   System (AS) because of some policy considerations.

   In the case when full domain diversity could not be achieved, it is
   helpful to minimize the commonly shared domains.  Also, it is
   interesting to note that other scope of diversity (node, link, SRLG
   etc.) can still be applied inside the commonly shared domains.


3.  PCEP Extensions

   This section defines extensions to PCEP [RFC5440] to support the
   H-PCE procedures.

3.1 Applicability to PCC-PCE Communications

   Although the extensions defined in this document are intended
   primarily for use between a child PCE and a parent PCE, they are
   also applicable for communications between a PCC and its PCE.

   Thus, the information that may be encoded in a PCReq can be sent
   from a PCC towards the child PCE. This includes the RP object
   (Section 3.3) and the Objective Function (OF) codes and objects
   (Section 3.4). A PCC and a child PCE could also exchange the
   capability (Section 3.2.1) during its session.

   This allows a PCC to request paths that transit multiple
   domains utilizing the capabilities defined in this document.

3.2.  OPEN  Object

   Two new TLVs are defined in this document to be carried within an
   OPEN object.  This way, during the PCEP session establishment, the
   H-PCE capability and Domain information can be advertised.

3.2.1.  H-PCE Capability TLV

   The H-PCE-CAPABILITY TLV is an optional TLV associated with the OPEN
   Object [RFC5440] to exchange H-PCE capability of PCEP speakers.

   Its format is shown in the following figure:









Zhang, et al.           Expires August, 2019                   [Page 8]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |               Type= TBD1      |            Length=4           |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                         Flags                               |P|
   +---------------------------------------------------------------+

                   Figure 1: H-PCE-CAPABILITY TLV format

   The type of the TLV is TBD1 (to be assigned by IANA), and it has a
   fixed length of 4 octets.

   The value comprises a single field - Flags (32 bits):

      P (Parent PCE Request bit): if set, will signal that the child PCE
      wishes to use the peer PCE as a parent PCE.

   Unassigned bits MUST be set to 0 on transmission and MUST be ignored
   on receipt.

   The inclusion of this TLV in an OPEN object indicates that the H-PCE
   extensions are supported by the PCEP speaker.  The child PCE MUST
   include this TLV and set the P flag.  The parent PCE MUST include
   this TLV and unset the P flag.

   The setting of the P flag (parent PCE request bit) would mean that
   the  PCEP speaker wants the peer to be a parent PCE, so in the case
   of a PCC to Child-PCE relationship, neither entity would set the P
   flag.

   If both peers attempt to set the P flag then the session
   establishment MUST fail, and the PCEP speaker MUST respond with PCErr
   message using Error-Type 1: "PCEP Session Establishment Failure" as
   per [RFC5440].

   If the PCE understands the H-PCE path computation request but did not
   advertise its H-PCE capability, it MUST send a PCErr message with
   Error-Type=TBD8 ("H-PCE error") and Error-Value=1 ("Parent PCE
   Capability not advertised").

3.2.1.1 Backwards Compatibility

   Section 7.1 of [RFC5440] requires that "Unrecognized TLVs MUST be
   ignored.

   That means that a PCE that does not support this document but that
   receives an Open Message containing an Open Object that includes


Zhang, et al.           Expires August, 2019                   [Page 9]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   an H-PCE-CAPABILITIES TLV will ignore that TLV and will continue to
   attempt to establish a PCEP session. It will, however, not include
   the TLV in the Open message that it sends, so the H-PCE relationship
   will not be created.

   If a PCE does not support the extensions defined in this document but
   receives them in a PCEP message (notwithstanding the fact that the
   session was not established as supporting a H-PCE relationship), the
   receiving PCE will ignore the H-PCE related parameters because they
   are all encoded in TLVs within standard PCEP objects.

3.2.2.  Domain-ID TLV

   The Domain-ID TLV when used in the OPEN object, identify the domains
   served by the PCE.  The child PCE uses this mechanism to inform the
   domain information to the parent PCE.

   The Domain-ID TLV is defined below:

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |               Type= TBD2      |            Length             |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   | Domain Type   |                  Reserved                     |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                                                               |
   //                          Domain ID                          //
   |                                                               |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

                      Figure 2: Domain-ID TLV format

   The type of the TLV is TBD2 (to be assigned by IANA), and it has a
   variable Length of the value portion.  The value part comprises of -

      Domain Type (8 bits): Indicates the domain type.  Four types of
      domain are currently defined:

      *  Type=1: the Domain ID field carries a 2-byte AS number.  Padded
         with trailing zeros to a 4-byte boundary.

      *  Type=2: the Domain ID field carries a 4-byte AS number.

      *  Type=3: the Domain ID field carries a 4-byte OSPF area ID.

      *  Type=4: the Domain ID field carries (2-byte Area-Len, variable
         length IS-IS area ID).  Padded with trailing zeros to a 4-byte


Zhang, et al.           Expires August, 2019                   [Page 10]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


         boundary.

      Reserved: Zero at transmission; ignored at the receipt.

      Domain ID (variable): Indicates an IGP Area ID or AS number as
      per the Domain Type field.  It can be 2 bytes, 4 bytes or variable
      length depending on the domain identifier used.  It is padded with
      trailing zeros to a 4-byte boundary. In case of IS-IS it includes
      the Area-Len as well.

   In the case a PCE serves more than one domain, multiple Domain-ID
   TLVs are included for each domain it serves.

3.2.  RP Object

3.2.1.  H-PCE-FLAG TLV

   The H-PCE-FLAG TLV is an optional TLV associated with the RP Object
   [RFC5440] to indicate the H-PCE path computation request and options.

   Its format is shown in the following figure:

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |               Type= TBD3      |             Length=4          |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                         Flags                             |D|S|
   +---------------------------------------------------------------+

                      Figure 3: H-PCE-FLAG TLV format

   The type of the TLV is TBD3 (to be assigned by IANA), and it has a
   fixed length of 4 octets.

   The value comprises a single field - Flags (32 bits):

      S (Domain Sequence bit): if set, will signal that the child PCE
      wishes to get only the domain sequence in the path computation
      reply.  Refer to Section 3.7 of [RFC7897] for details.

      D (Disallow Domain Re-entry bit): if set, will signal that the
      computed path does not enter a domain more than once.

   Unassigned bits MUST be set to 0 on transmission and MUST be ignored
   on receipt.

   The presence of the TLV indicates that the H-PCE based path


Zhang, et al.           Expires August, 2019                   [Page 11]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   computation is requested as per this document.

3.2.2.  Domain-ID TLV

   The usage of Domain-ID TLV carried in an OPEN object is used to
   indicate a (list of) managed domains and is described in
   Section 3.3.1.  This TLV when carried in an RP object, indicates the
   destination domain ID.  If a PCC knows the egress domain, it can
   supply this information in the PCReq message.  The format and
   procedure of this TLV are defined in Section 3.1.2.

   If a Domain-id TLV is used in the RP object, and the destination is
   not actually in the indicated domain, then the parent
   PCE should respond with a NO-PATH object and NO-PATH VECTOR TLV
   should be used, and a new bit number is assigned to indicate
   "Destination not found in the indicated domain" (see Section 3.7).

3.3.  Objective Functions

3.3.1.  OF Codes

   [RFC5541] defines a mechanism to specify an Objective Function that
   is used by a PCE when it computes a path.  Three new Objective
   Functions are defined for H-PCE, these are:

   o  MTD

      *  Name: Minimize the number of Transit Domains (MTD)

      *  Objective Function Code - TBD4 (to be assigned by IANA)

      *  Description: Find a path P such that it passes through the
         least number of transit domains.

      *  Objective functions are formulated using the following
         terminology:

         +  A network comprises a set of N domains {Di, (i=1...N)}.

         +  A path P passes through K unique domains {Dpi,(i=1...K)}.

         +  Find a path P such that the value of K is minimized.

   o  MBN

      *  Name: Minimize the number of border nodes.

      *  Objective Function Code - TBD5 (to be assigned by IANA)


Zhang, et al.           Expires August, 2019                   [Page 12]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


      *  Description: Find a path P such that it passes through the
         least number of border nodes.

      *  Objective functions are formulated using the following
         terminology:

         +  A network comprises a set of N links {Li, (i=1...N)}.

         +  A path P is a list of K links {Lpi,(i=1...K)}.

         +  D(Lpi) if a function that determines if the links  Lpi
            and Lpi+1 belong to different domains, D(Li) = 1 if link
            Li and Li+1 belong to different domains, D(Lk) = 0 if
            link Lk and Lk+1 belong to the same domain.

         +  The number of border node in a path P is denoted by B(P),
            where B(P) = sum{D(Lpi),(i=1...K-1)}.

         +  Find a path P such that B(P) is minimized.

   There is one objective function that applies to a set of synchronized
   path computation requests to increase the domain diversity:

   MCTD

   o  Name: Minimize the number of Common Transit Domains

   o  Objective Function Code - TBD13 (to be assigned by IANA)

   o  Description: Find a set of paths such that it passes through the
      least number of common transit domains.

         +  A network comprises a set of N domains {Di, (i=1...N)}.

         +  A path P passes through K unique domains {Dpi,(i=1...K)}.

         +  A set of paths {P1...Pm} have L transit domains that are
            common to more than one path {Dpi,(i=1...L)}.

         +  Find a set of paths such that the value of L is minimized.

3.3.2.  OF Object

   The OF (Objective Function) object [RFC5541] is carried within a
   PCReq message so as to indicate the desired/required objective
   function to be applied by the PCE during path computation.  As per
   Section 3.2 of [RFC5541] a single OF object may be included in a path
   computation request.


Zhang, et al.           Expires August, 2019                   [Page 13]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   The new OF codes described in Section 3.3.1 are applicable at the
   inter-domain path computation performed by the parent PCE, it is
   also necessary to specify the OF code that may be applied for the
   intra-domain path computation performed by the child PCE.  To
   accommodate this, the OF-List TLV (described in Section 2.1. of
   [RFC5541]) is included in the OF object as an optional TLV.

   The OF-List TLV allows encoding of multiple OF codes.  When this TLV
   is included inside the OF object, only the first OF-code in the
   OF-LIST TLV is considered.  The parent PCE MUST use this OF code in
   the OF object when sending the intra domain path computation request
   to the child PCE. If the OF list TLV is included in the OF Object,
   the OF Code inside the OF Object MUST include one of the H-PCE
   Objective Functions defined in this document, the OF Code inside the
   OF List TLV MUST NOT include an H-PCE Objective Function. If this
   condition is not met, the PCEP speaker MUST respond with a PCErr
   message with Error-Type=10 (Reception of an invalid object) and
   Error-Value=TBD15 (Incompatible OF codes in H-PCE).

   If the Objective Functions defined in this document are unknown or
   unsupported by a PCE, then the procedure as defined in [RFC5541]
   is followed.

3.4.  Metric Object

   The METRIC object is defined in Section 7.8 of [RFC5440], comprising
   of metric-value, metric-type (T field) and flags.  This document
   defines the following types for the METRIC object for H-PCE:

   o  T=TBD6: Domain count metric (number of domains crossed);

   o  T=TBD7: Border Node count metric (number of border nodes crossed).

   The domain count metric type of the METRIC object encodes the number
   of domain crossed in the path.  The border node count metric type of
   the METRIC object encodes the number of border nodes in the path. If
   a domain is re-entered, then domain should be double counted.

   A PCC or child PCE MAY use these metric in PCReq message for an
   inter-domain path computation meeting the number of domain or border
   nodes crossing requirement. As per [RFC5440], in this case, the B bit
   is set to suggest a bound (a maximum) for the metric that must not be
   exceeded for the PCC to consider the computed path as acceptable.

   A PCC or child PCE MAY also use this metric to ask the PCE to
   optimize the metric during inter-domain path computation.  In this
   case, the B flag is cleared, and the C flag is set.



Zhang, et al.           Expires August, 2019                   [Page 14]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   The Parent PCE MAY use these metric in a PCRep message along with a
   NO-PATH object in the case where the PCE cannot compute a path
   meeting this constraint.  A PCE MAY also use this metric to send the
   computed end to end metric value in a reply message.


3.5.  SVEC Object

   [RFC5440] defines SVEC object which includes flags for the potential
   dependency between the set of path computation requests (Link, Node
   and SRLG diverse).  This document defines a new flag O for domain
   diversity.

   The following new bit is added to the Flags field:

   o  O (Domain diverse) bit - TBD14 : when set, this indicates that the
      computed paths corresponding to the requests specified by the
      following RP objects MUST NOT have any transit domains in
      common.

   The Domain Diverse O-bit can be used in Hierarchical PCE path
   computation to compute synchronized domain diverse end to end path or
   diverse domain sequences.

   When domain diverse O bit is set, it is applied to the transit
   domains.  The other bit in SVEC object (N, L, S etc.) MAY be set and
   MUST still be applied in the ingress and egress shared domain.

3.6.  PCEP-ERROR Object

3.6.1.  Hierarchy PCE Error-Type

   A new PCEP Error-Type [RFC5440] is used for the H-PCE extension as
   defined below:

    +------------+-----------------------------------------+
    | Error-Type | Meaning                                 |
    +------------+-----------------------------------------+
    | TBD8       | H-PCE error                             |
    |            | Error-value=1: H-PCE capability         |
    |            | was not advertised                      |
    |            | Error-value=2: parent PCE capability    |
    |            | cannot be provided                      |
    +------------+-----------------------------------------+

                           Figure 4: H-PCE error

3.7.  NO-PATH Object


Zhang, et al.           Expires August, 2019                   [Page 15]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   To communicate the reason(s) for not being able to find a multi-
   domain path or domain sequence, the NO-PATH object can be used in the
   PCRep message.  [RFC5440] defines the format of the NO-PATH object.
   The object may contain a NO-PATH-VECTOR TLV to provide additional
   information about why a path computation has failed.

   Three new bit flags are defined to be carried in the Flags field in
   the NO-PATH-VECTOR TLV carried in the NO-PATH Object.

   o  Bit number TBD9: When set, the parent PCE indicates that
      destination domain unknown;

   o  Bit number TBD10: When set, the parent PCE indicates unresponsive
      child PCE(s);

   o  Bit number TBD11: When set, the parent PCE indicates no available
      resource available in one or more domains.

   o  Bit number TBD12: When set, the parent PCE indicates that
      the destination is not found in the indicated domain.

4.  H-PCE Procedures

  The H-PCE path computation procedure is described in [RFC6805].

4.1.  OPEN Procedure between Child PCE and Parent PCE

   If a child PCE wants to use the peer PCE as a parent, it MUST set the
   P (parent PCE request flag) in the H-PCE-CAPABILITY TLV inside the
   OPEN object carried in the Open message during the PCEP session
   initialization procedure.

   The child PCE MAY also report its list of domain IDs to the parent
   PCE by specifying them in the Domain-ID TLVs in the OPEN object
   carried in the Open message during the PCEP session initialization
   procedure.

   The OF codes defined in this document can be carried in the OF-list
   TLV of the OPEN object.  If the OF-list TLV carries the OF codes, it
   means that the PCE is capable of implementing the corresponding
   objective functions.  This information can be used for selecting a
   proper parent PCE when a child PCE wants to get a path that satisfies
   a certain Objective Function.

   When a specific child PCE sends a PCReq to a peer PCE that requires
   parental activity and H-PCE capability flags TLV was not included in
   the session establishment procedure as described above, the peer PCE
   should send a PCErr message to the child PCE and specify the error-


Zhang, et al.           Expires August, 2019                   [Page 16]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   type=TBD8 (H-PCE error) and error-value=1 (H-PCE capability was
   not advertised) in the PCEP-ERROR object.

   When a specific child PCE sends a PCReq to a peer PCE that requires
   parental activity and the peer PCE does not want to act as the parent
   for it, the peer PCE should send a PCErr message to the child PCE and
   specify the error-type=TBD8 (H-PCE error) and error-value=2 (Parent
   PCE capability cannot be provided) in the PCEP-ERROR object.

4.2.  Procedure to Obtain Domain Sequence

   If a child PCE only wants to get the domain sequence for a multi-
   domain path computation from a parent PCE, it can set the Domain Path
   Request bit in the H-PCE-FLAG TLV in the RP object carried in a PCReq
   message.  The parent PCE which receives the PCReq message tries to
   compute a domain sequence for it (instead of the E2E path).  If the
   domain path computation succeeds the parent PCE sends a PCRep message
   which carries the domain sequence in the ERO to the child PCE.  Refer
   [RFC7897] for more details about domain sub-objects in the ERO.
   Otherwise, it sends a PCReq message which carries the NO-PATH object
   to the child PCE.

5.  Error Handling

   A PCE that is capable of acting as a parent PCE might not be
   configured or willing to act as the parent for a specific child PCE.
   This fact could be determined when the child sends a PCReq that
   requires parental activity, and could result in a negative response
   in a PCEP Error (PCErr) message and indicate the hierarchy PCE error-
   type=TBD8 (H-PCE error) and suitable error-value.  (Section 3.6)

   Additionally, the parent PCE may fail to find the multi-domain path
   or domain sequence due to one or more of the following reasons:

   o  A child PCE cannot find a suitable path to the egress;

   o  The parent PCE do not hear from a child PCE for a specified time;

   o  The Objective Functions specified in the path request cannot be
      met.

   In this case, the parent PCE MAY need to send a negative path
   computation reply specifying the reason.  This can be achieved by
   including NO-PATH object in the PCRep message.  Extension to NO-PATH
   object is needed to include the aforementioned reasons described in
   Section 3.7.




Zhang, et al.           Expires August, 2019                   [Page 17]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


6.  Manageability Considerations

   General PCE and PCEP management considerations are discussed in
   [RFC4655] and [RFC5440].  There are additional management
   considerations for H-PCE which are described in [RFC6805], and
   repeated in this section.

   The administrative entity responsible for the management of the
   parent PCEs must be determined for the following cases:

   o  multi-domains (e.g., IGP areas or multiple ASes) within a single
      service provider network, the management responsibility for the
      parent PCE would most likely be handled by the service provider,

   o  multiple ASes within different service provider networks, it may
      be necessary for a third party to manage the parent PCEs according
      to commercial and policy agreements from each of the participating
      service providers.

6.1.  Control of Function and Policy

   Control and function will need to be carefully managed in an H-PCE
   network.  A child PCE will need to be configured with the address of
   its parent PCE.  It is expected that there will only be one or two
   parents of any child.

   The parent PCE also needs to be aware of the child PCEs for all child
   domains that it can see.  This information is most likely to be
   configured (as part of the administrative definition of each domain).

   Discovery of the relationships between parent PCEs and child PCEs
   do not form part of the hierarchical PCE architecture.  Mechanisms
   that rely on advertising or querying PCE locations across domain or
   provider boundaries are undesirable for security, scaling,
   commercial, and confidentiality reasons.  The specific behaviour of
   the child and parent PCE are described in the following sub-sections.

6.1.1.  Child PCE

   Support of the hierarchical procedure will be controlled by the
   management organization responsible for each child PCE.  A child PCE
   must be configured with the address of its parent PCE in order for it
   to interact with its parent PCE.  The child PCE must also be
   authorized to peer with the parent PCE.

6.1.2.  Parent PCE

   The parent PCE must only accept path computation requests from


Zhang, et al.           Expires August, 2019                   [Page 18]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   authorized child PCEs.  If a parent PCE receives requests from an
   unauthorized child PCE, the request should be dropped.  This means
   that a parent PCE must be configured with the identities and security
   credentials of all of its child PCEs, or there must be some form of
   shared secret that allows an unknown child PCE to be authorized by
   the parent PCE.

6.1.3.  Policy Control

   It may be necessary to maintain a policy module on the parent PCE
   [RFC5394].  This would allow the parent PCE to apply commercially
   relevant constraints such as SLAs, security, peering preferences, and
   monetary costs.

   It may also be necessary for the parent PCE to limit the
   end-to-end path selection by including or excluding specific domains
   based on commercial relationships, security implications, and
   reliability.

6.2.  Information and Data Models

   A MIB module for PCEP was published as RFC 7420 [RFC7420] that
   describes managed objects for modelling of PCEP communication.  A
   YANG module for PCEP has also been proposed [I-D.ietf-pce-pcep-yang].

   Aditionally, H-PCE MIB module, or additional data model, will be
   required to report parent PCE and child PCE information, including:

   o  parent PCE configuration and status,

   o  child PCE configuration and information,

   o  notifications to indicate session changes between parent PCEs and
      child PCEs, and

   o  notification of parent PCE TED updates and changes.

6.3.  Liveness Detection and Monitoring

   The hierarchical procedure requires interaction with multiple PCEs.
   Once a child PCE requests an end-to-end path, a sequence of events
   occurs that requires interaction between the parent PCE and each
   child PCE.  If a child PCE is not operational, and an alternate
   transit domain is not available, then the failure must be reported.

6.4.  Verify Correct Operations

   Verifying the correct operation of a parent PCE can be performed by


Zhang, et al.           Expires August, 2019                   [Page 19]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   monitoring a set of parameters.  The parent PCE implementation should
   provide the following parameters monitored at the parent PCE:

   o  number of child PCE requests,

   o  number of successful hierarchical PCE procedures completions on a
      per-PCE-peer basis,

   o  number of hierarchical PCE procedure completion failures on a per-
      PCE-peer basis, and

   o  number of hierarchical PCE procedure requests from unauthorized
      child PCEs.

6.5.  Requirements On Other Protocols

   Mechanisms defined in this document do not imply any new requirements
   on other protocols.

6.6.  Impact On Network Operations

   The hierarchical PCE procedure is a multiple-PCE path computation
   scheme.  Subsequent requests to and from the child and parent PCEs do
   not differ from other path computation requests and should not have
   any significant impact on network operations.

7.  IANA Considerations

   IANA maintains the "Path Computation Element Protocol (PCEP) Numbers"
   registry.  This document requests IANA actions to allocate code
   points for the protocol elements defined in this document.

7.1.  PCEP TLV Type Indicators

   IANA Manages the PCEP TLV code point registry (see [RFC5440]).  This
   is maintained as the "PCEP TLV Type Indicators" sub-registry of the
   "Path Computation Element Protocol (PCEP) Numbers" registry.

   This document defines three new PCEP TLVs.  IANA is requested to make
   the following allocation:

         Type      TLV name                  References
         -----------------------------------------------
         TBD1      H-PCE-CAPABILITY TLV      This I-D
         TBD2      Domain-ID TLV             This I-D
         TBD3      H-PCE-FLAG TLV            This I-D

7.2.  H-PCE-CAPABILITY TLV Flags


Zhang, et al.           Expires August, 2019                   [Page 20]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   This document requests that a new sub-registry, named "H-PCE-
   CAPABILITY TLV Flag Field", is created within the "Path Computation
   Element Protocol (PCEP) Numbers" registry to manage the Flag field in
   the H-PCE-CAPABILITY TLV of the PCEP OPEN object.

   New values are to be assigned by Standards Action [RFC8126].  Each
   bit should be tracked with the following qualities:

   o  Bit number (counting from bit 0 as the most significant bit)

   o  Capability description

   o  Defining RFC

   The following values are defined in this document:

         Bit     Description                      Reference
         --------------------------------------------------
         31      P (Parent PCE Request bit)       This I.D.

7.3.  Domain-ID TLV Domain type

   This document requests that a new sub-registry, named "Domain-ID TLV
   Domain type", is created within the "Path Computation Element
   Protocol (PCEP) Numbers" registry to manage the Domain-Type field of
   the Domain-ID TLV. The allocation policy for this new sub-registry is
   IETF Review [RFC8126].


         Value     Meaning
         -----------------------------------------------
          1        2-byte AS number
          2        4-byte AS number
          3        4-byte OSPF area ID
          4        Variable length IS-IS area ID

7.4.  H-PCE-FLAG TLV Flags

   This document requests that a new sub-registry, named "H-PCE-FLAGS
   TLV Flag Field", is created within the "Path Computation Element
   Protocol (PCEP) Numbers" registry to manage the Flag field in the H-
   PCE-FLAGS TLV of the PCEP RP object.  New values are to be assigned
   by Standards Action [RFC8126].  Each bit should be tracked with the
   following qualities:

   o  Bit number (counting from bit 0 as the most significant bit)

   o  Capability description


Zhang, et al.           Expires August, 2019                   [Page 21]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   o  Defining RFC

   The following values are defined in this document:


         Bit     Description           Reference
         -----------------------------------------------
         31      S (Domain             This I.D.
                    Sequence bit)
         30      D (Disallow Domain    This I.D.
                    Re-entry bit)

7.5.  OF Codes

   IANA maintains a registry of Objective Function (described in
   [RFC5541]) at the sub-registry "Objective Function".  Three new
   Objective Functions have been defined in this document.

   IANA is requested to make the following allocations:

       Code
       Point    Name                           Reference
       ------------------------------------------------------
       TBD4     Minimum number of Transit      This I.D.
                Domains (MTD)
       TBD5     Minimize number of Border      This I.D.
                Nodes (MBN)
       TBD13    Minimize the number of         This I.D.
                Common Transit Domains
                (MCTD)

7.6.  METRIC Types

   IANA maintains one sub-registry for "METRIC object T field".  Two new
   metric types are defined in this document for the METRIC object
   (specified in [RFC5440]).

   IANA is requested to make the following allocations:

       Value    Description                    Reference
       ----------------------------------------------------------
       TBD6     Domain Count metric            This I.D.
       TBD7     Border Node Count metric       This I.D.

7.7.  New PCEP Error-Types and Values

   IANA maintains a registry of Error-Types and Error-values for use in
   PCEP messages.  This is maintained as the "PCEP-ERROR Object Error


Zhang, et al.           Expires August, 2019                   [Page 22]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   Types and Values" sub-registry of the "Path Computation Element
   Protocol (PCEP) Numbers" registry.

   IANA is requested to make the following allocations:

       Error-Type    Meaning and error values  Reference
       ------------------------------------------------------
       TBD8     H-PCE Error                    This I.D.

                Error-value=1 H-PCE
                Capability not advertised

                Error-value=2 Parent PCE
                Capability cannot be provided

        10      Reception of an invalid object [RFC5440]

                Error-value=TBD15: Incompatible  This I.D.
                OF codes in H-PCE

7.8.  New NO-PATH-VECTOR TLV Bit Flag

   IANA maintains a sub-registry "NO-PATH-VECTOR TLV Flag Field" of
   bit flags carried in the PCEP NO-PATH-VECTOR TLV in the PCEP NO-PATH
   object as defined in [RFC5440]. IANA is requested to assign three
   new bit flag as follows:

      Bit Number      Name Flag                   Reference
      ------------------------------------------------------
      TBD9            Destination Domain unknown  This I.D.
      TBD10           Unresponsive child PCE(s)   This I.D.
      TBD11           No available resource in    This I.D.
                      one or more domain
      TBD12           Destination is not found    This I.D.
                      in the indicated domain.

7.9.  SVEC Flag

   IANA maintains a sub-registry "SVEC Object Flag Field" of bit flags
   carried in the PCEP SVEC object as defined in [RFC5440].  IANA is
   requested to assign one new bit flag as follows:

      Bit Number      Name Flag                   Reference
      ------------------------------------------------------
      TBD14           Domain Diverse              This I.D.


8.  Security Considerations


Zhang, et al.           Expires August, 2019                   [Page 23]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   The hierarchical PCE procedure relies on PCEP and inherits the
   security requirements defined in [RFC5440].  As PCEP operates over
   TCP, it may also make use of TCP security mechanisms, such as TCP
   Authentication Option (TCP-AO) [RFC5925] or Transport Layer
   Security (TLS) [RFC8253].

   Any multi-domain operation necessarily involves the exchange of
   information across domain boundaries.  This may represent a
   significant security and confidentiality risk especially when the
   child domains are controlled by different commercial concerns.  PCEP
   allows individual PCEs to maintain the confidentiality of their
   domain path information using path-keys [RFC5520], and the H-PCE
   architecture is specifically designed to enable as much isolation of
   domain topology and capabilities information as is possible.

   For further considerations of the security issues related to inter-AS
   path computation, see [RFC5376].


9.  Contributing Authors

      Xian Zhang
      Huawei
      EMail: zhang.xian@huawei.com


      Dhruv Dhody
      Huawei Technologies
      Divyashree Techno Park, Whitefield
      Bangalore, Karnataka  560066
      India

      EMail: dhruv.ietf@gmail.com

10.  References

10.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC5440]  Vasseur, JP., Ed. and JL. Le Roux, Ed., "Path Computation
              Element (PCE) Communication Protocol (PCEP)", RFC 5440,
              DOI 10.17487/RFC5440, March 2009,
              <https://www.rfc-editor.org/info/rfc5440>.



Zhang, et al.           Expires August, 2019                   [Page 24]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   [RFC5541]  Le Roux, JL., Vasseur, JP., and Y. Lee, "Encoding of
              Objective Functions in the Path Computation Element
              Communication Protocol (PCEP)", RFC 5541,
              DOI 10.17487/RFC5541, June 2009,
              <https://www.rfc-editor.org/info/rfc5541>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

10.2.  Informative References

   [RFC4105]  Le Roux, J., Ed., Vasseur, J., Ed., and J. Boyle, Ed.,
              "Requirements for Inter-Area MPLS Traffic Engineering",
              RFC 4105, DOI 10.17487/RFC4105, June 2005,
              <https://www.rfc-editor.org/info/rfc4105>.

   [RFC4216]  Zhang, R., Ed. and J. Vasseur, Ed., "MPLS Inter-Autonomous
              System (AS) Traffic Engineering (TE) Requirements",
              RFC 4216, DOI 10.17487/RFC4216, November 2005,
              <https://www.rfc-editor.org/info/rfc4216>.

   [RFC4655]  Farrel, A., Vasseur, J., and J. Ash, "A Path Computation
              Element (PCE)-Based Architecture", RFC 4655,
              DOI 10.17487/RFC4655, August 2006,
              <https://www.rfc-editor.org/info/rfc4655>.

   [RFC4726]  Farrel, A., Vasseur, J., and A. Ayyangar, "A Framework for
              Inter-Domain Multiprotocol Label Switching Traffic
              Engineering", RFC 4726, DOI 10.17487/RFC4726, November
              2006, <https://www.rfc-editor.org/info/rfc4726>.

   [RFC5152]  Vasseur, JP., Ed., Ayyangar, A., Ed., and R. Zhang, "A
              Per-Domain Path Computation Method for Establishing Inter-
              Domain Traffic Engineering (TE) Label Switched Paths
              (LSPs)", RFC 5152, DOI 10.17487/RFC5152, February 2008,
              <https://www.rfc-editor.org/info/rfc5152>.

   [RFC5376]  Bitar, N., Zhang, R., and K. Kumaki, "Inter-AS
              Requirements for the Path Computation Element
              Communication Protocol (PCECP)", RFC 5376,
              DOI 10.17487/RFC5376, November 2008,
              <https://www.rfc-editor.org/info/rfc5376>.

   [RFC5394]  Bryskin, I., Papadimitriou, D., Berger, L., and J. Ash,
              "Policy-Enabled Path Computation Framework", RFC 5394,
              DOI 10.17487/RFC5394, December 2008,
              <https://www.rfc-editor.org/info/rfc5394>.


Zhang, et al.           Expires August, 2019                   [Page 26]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   [RFC5520]  Bradford, R., Ed., Vasseur, JP., and A. Farrel,
              "Preserving Topology Confidentiality in Inter-Domain Path
              Computation Using a Path-Key-Based Mechanism", RFC 5520,
              DOI 10.17487/RFC5520, April 2009,
              <https://www.rfc-editor.org/info/rfc5520>.

   [RFC5441]  Vasseur, JP., Ed., Zhang, R., Bitar, N., and JL. Le Roux,
              "A Backward-Recursive PCE-Based Computation (BRPC)
              Procedure to Compute Shortest Constrained Inter-Domain
              Traffic Engineering Label Switched Paths", RFC 5441,
              DOI 10.17487/RFC5441, April 2009,
              <https://www.rfc-editor.org/info/rfc5441>.

   [RFC5925]  Touch, J., Mankin, A., and R. Bonica, "The TCP
              Authentication Option", RFC 5925, DOI 10.17487/RFC5925,
              June 2010, <https://www.rfc-editor.org/info/rfc5925>.

   [RFC6805]  King, D., Ed. and A. Farrel, Ed., "The Application of the
              Path Computation Element Architecture to the Determination
              of a Sequence of Domains in MPLS and GMPLS", RFC 6805,
              DOI 10.17487/RFC6805, November 2012,
              <https://www.rfc-editor.org/info/rfc6805>.

   [RFC7399]  Farrel, A. and D. King, "Unanswered Questions in the Path
              Computation Element Architecture", RFC 7399,
              DOI 10.17487/RFC7399, October 2014,
              <http://www.rfc-editor.org/info/rfc7399>.

   [RFC7420]  Koushik, A., Stephan, E., Zhao, Q., King, D., and J.
              Hardwick, "Path Computation Element Communication Protocol
              (PCEP) Management Information Base (MIB) Module",
              RFC 7420, DOI 10.17487/RFC7420, December 2014,
              <https://www.rfc-editor.org/info/rfc7420>.

   [RFC7752]  Gredler, H., Ed., Medved, J., Previdi, S., Farrel, A., and
              S. Ray, "North-Bound Distribution of Link-State and
              Traffic Engineering (TE) Information Using BGP", RFC 7752,
              DOI 10.17487/RFC7752, March 2016,
              <https://www.rfc-editor.org/info/rfc7752>.

   [RFC7897]  Dhody, D., Palle, U., and R. Casellas, "Domain Subobjects
              for the Path Computation Element Communication Protocol
              (PCEP)", RFC 7897, DOI 10.17487/RFC7897, June 2016,
              <https://www.rfc-editor.org/info/rfc7897>.

   [RFC8126]  Cotton, M., Leiba, B., and T. Narten, "Guidelines for
              Writing an IANA Considerations Section in RFCs", BCP 26,
              RFC 8126, DOI 10.17487/RFC8126, June 2017,


Zhang, et al.           Expires August, 2019                   [Page 27]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


              <https://www.rfc-editor.org/info/rfc8126>.

   [RFC8253]  Lopez, D., Gonzalez de Dios, O., Wu, Q., and D. Dhody,
              "PCEPS: Usage of TLS to Provide a Secure Transport for the
              Path Computation Element Communication Protocol (PCEP)",
              RFC 8253, DOI 10.17487/RFC8253, October 2017,
              <https://www.rfc-editor.org/info/rfc8253>.

   [I-D.ietf-pce-pcep-yang]
              Dhody, D., Hardwick, J., Beeram, V., and J. Tantsura, "A
              YANG Data Model for Path Computation Element
              Communications Protocol (PCEP)", draft-ietf-pce-pcep-
              yang-09 (work in progress), October 2018.

   [I-D.ietf-pce-stateful-hpce]
              Dhody, D., Lee, Y., Ceccarelli, D., Shin, J., King, D.,
              and O. Dios, "Hierarchical Stateful Path Computation
              Element (PCE).", draft-ietf-pce-stateful-hpce-06 (work in
              progress), June 2018.


Authors' Addresses

   Fatai Zhang
   Huawei
   Huawei Base, Bantian, Longgang District
   Shenzhen  518129
   China

   EMail: zhangfatai@huawei.com


   Quintin Zhao
   Huawei
   125 Nagog Technology Park
   Acton, MA  01719
   USA

   EMail: quintin.zhao@huawei.com


   Oscar Gonzalez de Dios
   Telefonica I+D
   Don Ramon de la Cruz 82-84
   Madrid  28045
   Spain

   EMail: ogondio@tid.es


Zhang, et al.           Expires August, 2019                   [Page 28]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   Ramon Casellas
   CTTC
   Av. Carl Friedrich Gauss n.7
   Barcelona, Castelldefels
   Spain

   EMail: ramon.casellas@cttc.es


   Daniel King
   Old Dog Consulting
   UK

   EMail: daniel@olddog.co.uk


Appendix

A1. Implementation Status

   The H-PCE architecture and protocol procedures describe in this I-D
   were implemented and tested for a variety of optical research
   applications.

   The Appendix should be removed before publication.

A1.1.  Inter-layer traffic engineering with H-PCE

   This work was led by:

   o  Ramon Casellas [ramon.casellas@cttc.es]

   o  Centre Tecnologic de Telecomunicacions de Catalunya (CTTC)

   The H-PCE instances (parent and child) were multi-threaded
   asynchronous processes.  Implemented in C++11, using C++ Boost
   Libraries.  The targeted system used to deploy and run H-PCE
   applications was a POSIX system (Debian GNU/Linux operating system).

   Some parts of the software may require a Linux Kernel, the
   availability of a Routing Controller running collocated in the same
   host and the usage of libnetfilter / libipq and GNU/Linux firewalling
   capabilities.  Most of the functionality, including algorithms is
   done by means of plugins (e.g., as shared libraries or .so files in
   Unix systems).

   The CTTC PCE supports the H-PCE architecture, but also supports


Zhang, et al.           Expires August, 2019                   [Page 29]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


   stateful PCE with active capabilities, as an OpenFlow controller, and
   has dedicated plugins to support monitoring, BRPC, P2MP, path keys,
   back end PCEs.  Management of the H-PCE entities was supported via
   HTTP and CLI via Telnet.

   Further details of the H-PCE prototyping and experimentation can be
   found in the following scientific papers:

      R.  Casellas, R.  Martinez, R.  Munoz, L.  Liu, T.  Tsuritani, I.
      Morita, "Inter-layer traffic engineering with hierarchical-PCE in
      MPLS-TP over wavelength switched optical networks" , Optics
      Express, Vol. 20, No. 28, December 2012.

      R.  Casellas, R.  Martinez, R.  Munoz, L.  Liu, T.  Tsuritani, I.
      Morita, M.  Msurusawa, "Dynamic virtual link mesh topology
      aggregation in multi-domain translucent WSON with hierarchical-
      PCE", Optics Express Journal, Vol. 19, No. 26, December 2011.

      R.  Casellas, R.  Munoz, R.  Martinez, R.  Vilalta, L.  Liu, T.
      Tsuritani, I.  Morita, V.  Lopez, O.  Gonzalez de Dios, J.  P.
      Fernandez-Palacios, "SDN based Provisioning Orchestration of
      OpenFlow/GMPLS Flexi-grid Networks with a Stateful Hierarchical
      PCE", in Proceedings of Optical Fiber Communication Conference and
      Exposition (OFC), 9-13 March, 2014, San Francisco (EEUU).
      Extended Version to appear in Journal Of Optical Communications
      and Networking January 2015

      F.  Paolucci, O.  Gonzalez de Dios, R.  Casellas, S.  Duhovnikov,
      P.  Castoldi, R.  Munoz, R.  Martinez, "Experimenting Hierarchical
      PCE Architecture in a Distributed Multi-Platform Control Plane
      Testbed" , in Proceedings of Optical Fiber Communication
      Conference and Exposition (OFC) and The National Fiber Optic
      Engineers Conference (NFOEC), 4-8 March, 2012, Los Angeles,
      California (USA).

      R.  Casellas, R.  Martinez, R.  Munoz, L.  Liu, T.  Tsuritani, I.
      Morita, M.  Tsurusawa, "Dynamic Virtual Link Mesh Topology
      Aggregation in Multi-Domain Translucent WSON with Hierarchical-
      PCE", in Proceedings of 37th European Conference and Exhibition on
      Optical Communication (ECOC 2011), 18-22 September 2011, Geneve (
      Switzerland).

      R.  Casellas, R.  Munoz, R.  Martinez, "Lab Trial of Multi-Domain
      Path Computation in GMPLS Controlled WSON Using a Hierarchical
      PCE", in Proceedings of OFC/NFOEC Conference (OFC2011), 10 March
      2011, Los Angeles (USA).



Zhang, et al.           Expires August, 2019                   [Page 30]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


A1.2.  Telefonica Netphony (Open Source PCE)

   The Telefonica Netphony PCE is an open source Java-based
   implementation of a Path Computation Element, with several flavours,
   and a Path Computation Client.  The PCE follows a modular
   architecture and allows to add customized algorithms.  The PCE has
   also stateful and remote initiation capabilities.  In current
   version, three components can be built, a domain PCE (aka child PCE),
   a parent PCE (ready for the H-PCE architecture) and a PCC (path
   computation client).

   This work was led by:

   o  Oscar Gonzalez de Dios [oscar.gonzalezdedios@telefonica.com]

   o  Victor Lopez Alvarez [victor.lopezalvarez@telefonica.com]

   o  Telefonica I+D, Madrid, Spain

   The PCE code is publicly available in a GitHub repository:

   o  https://github.com/telefonicaid/netphony-pce

   The PCEP protocol encodings are located in the following repository:

   o  https://github.com/telefonicaid/netphony-network protocols

   The traffic engineering database and a BGP-LS speaker to fill the
   database is located in:

   o  https://github.com/telefonicaid/netphony-topology

   The parent and child PCE are multi-threaded java applications.  The
   path computation uses the jgrapht free Java class library (0.9.1)
   that provides mathematical graph-theory objects and algorithms.
   Current version of netphony PCE runs on java 1.7 and 1.8, and has
   been tested in GNU/Linux, Mac OS-X and Windows environments.  The
   management of the parent and domain PCEs is supported though CLI via
   Telnet, and configured via XML files.

   Further details of the netphony H-PCE prototyping and experimentation
   can be found in the following research papers:

   o  O.  Gonzalez de Dios, R.  Casellas, F.  Paolucci, A.  Napoli, L.
      Gifre, A.  Dupas, E, Hugues-Salas, R.  Morro, S.  Belotti, G.
      Meloni, T.  Rahman, V.P Lopez, R.  Martinez, F.  Fresi, M.  Bohn,
      S.  Yan, L.  Velasco, . Layec and J.  P.  Fernandez-Palacios:


Zhang, et al.           Expires August, 2019                   [Page 31]


Internet-Draft          PCEP Extensions for H-PCE       February   2019


      Experimental Demonstration of Multivendor and Multidomain EON With
      Data and Control Interoperability Over a Pan-European Test Bed, in
      Journal of Lightwave Technology, Dec. 2016, Vol. 34, Issue 7, pp.
      1610-1617.

   o  O.  Gonzalez de Dios, R.  Casellas, R.  Morro, F.  Paolucci, V.
      Lopez, R.  Martinez, R.  Munoz, R.  Villalta, P.  Castoldi:
      "Multi-partner Demonstration of BGP-LS enabled multi-domain EON,
      in Journal of Optical Communications and Networking, Dec. 2015,
      Vol. 7, Issue 12, pp.  B153-B162.

   o  F.  Paolucci, O.  Gonzalez de Dios, R.  Casellas, S.  Duhovnikov,
      P.  Castoldi, R.  Munoz, R.  Martinez, "Experimenting Hierarchical
      PCE Architecture in a Distributed Multi-Platform Control Plane
      Testbed" , in Proceedings of Optical Fiber Communication
      Conference and Exposition (OFC) and The National Fiber Optic
      Engineers Conference (NFOEC), 4-8 March, 2012, Los Angeles,
      California (USA).

A1.3.  H-PCE Proof of Concept developed by Huawei

   Huawei developed this H-PCE on the Huawei Versatile Routing Platform
   (VRP) to experiment with the hierarchy of PCE.  Both end to end path
   computation as well as computation for domain-sequence are supported.

   This work was led by:

   o  Udayasree Pallee [udayasreereddy@gmail.com]

   o  Dhruv Dhody [dhruv.ietf@gmail.com]

   o  Huawei Technologies, Bangalore, India

   Further work on stateful H-PCE [I-D.ietf-pce-stateful-hpce] is being
   carried out on ONOS.














Zhang, et al.           Expires August, 2019                   [Page 32]

Internet-Draft          PCEP Extensions for H-PCE       February   2019