HTTPbis Working Group                                   R. Fielding, Ed.
Internet-Draft                                              Day Software
Obsoletes: 2616 (if approved)                                  J. Gettys
Intended status: Standards Track                    One Laptop per Child
Expires: January 14, 2010                                       J. Mogul
                                                                      HP
                                                              H. Frystyk
                                                               Microsoft
                                                             L. Masinter
                                                           Adobe Systems
                                                                P. Leach
                                                               Microsoft
                                                          T. Berners-Lee
                                                                 W3C/MIT
                                                           Y. Lafon, Ed.
                                                                     W3C
                                                         J. Reschke, Ed.
                                                              greenbytes
                                                           July 13, 2009


         HTTP/1.1, part 5: Range Requests and Partial Responses
                     draft-ietf-httpbis-p5-range-07

Status of this Memo

   This Internet-Draft is submitted to IETF in full conformance with the
   provisions of BCP 78 and BCP 79.  This document may contain material
   from IETF Documents or IETF Contributions published or made publicly
   available before November 10, 2008.  The person(s) controlling the
   copyright in some of this material may not have granted the IETF
   Trust the right to allow modifications of such material outside the
   IETF Standards Process.  Without obtaining an adequate license from
   the person(s) controlling the copyright in such materials, this
   document may not be modified outside the IETF Standards Process, and
   derivative works of it may not be created outside the IETF Standards
   Process, except to format it for publication as an RFC or to
   translate it into languages other than English.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."



Fielding, et al.        Expires January 14, 2010                [Page 1]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on January 14, 2010.

Copyright Notice

   Copyright (c) 2009 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents in effect on the date of
   publication of this document (http://trustee.ietf.org/license-info).
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.

Abstract

   The Hypertext Transfer Protocol (HTTP) is an application-level
   protocol for distributed, collaborative, hypermedia information
   systems.  HTTP has been in use by the World Wide Web global
   information initiative since 1990.  This document is Part 5 of the
   seven-part specification that defines the protocol referred to as
   "HTTP/1.1" and, taken together, obsoletes RFC 2616.  Part 5 defines
   range-specific requests and the rules for constructing and combining
   responses to those requests.

Editorial Note (To be removed by RFC Editor)

   Discussion of this draft should take place on the HTTPBIS working
   group mailing list (ietf-http-wg@w3.org).  The current issues list is
   at <http://tools.ietf.org/wg/httpbis/trac/report/11> and related
   documents (including fancy diffs) can be found at
   <http://tools.ietf.org/wg/httpbis/>.

   The changes in this draft are summarized in Appendix D.8.












Fielding, et al.        Expires January 14, 2010                [Page 2]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  4
     1.1.  Requirements . . . . . . . . . . . . . . . . . . . . . . .  4
     1.2.  Syntax Notation  . . . . . . . . . . . . . . . . . . . . .  4
       1.2.1.  Core Rules . . . . . . . . . . . . . . . . . . . . . .  5
       1.2.2.  ABNF Rules defined in other Parts of the
               Specification  . . . . . . . . . . . . . . . . . . . .  5
   2.  Range Units  . . . . . . . . . . . . . . . . . . . . . . . . .  5
   3.  Status Code Definitions  . . . . . . . . . . . . . . . . . . .  5
     3.1.  206 Partial Content  . . . . . . . . . . . . . . . . . . .  6
     3.2.  416 Requested Range Not Satisfiable  . . . . . . . . . . .  6
   4.  Combining Ranges . . . . . . . . . . . . . . . . . . . . . . .  7
   5.  Header Field Definitions . . . . . . . . . . . . . . . . . . .  7
     5.1.  Accept-Ranges  . . . . . . . . . . . . . . . . . . . . . .  7
     5.2.  Content-Range  . . . . . . . . . . . . . . . . . . . . . .  8
     5.3.  If-Range . . . . . . . . . . . . . . . . . . . . . . . . . 10
     5.4.  Range  . . . . . . . . . . . . . . . . . . . . . . . . . . 11
       5.4.1.  Byte Ranges  . . . . . . . . . . . . . . . . . . . . . 11
       5.4.2.  Range Retrieval Requests . . . . . . . . . . . . . . . 13
   6.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 14
     6.1.  Message Header Registration  . . . . . . . . . . . . . . . 14
   7.  Security Considerations  . . . . . . . . . . . . . . . . . . . 14
   8.  Acknowledgments  . . . . . . . . . . . . . . . . . . . . . . . 14
   9.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 14
     9.1.  Normative References . . . . . . . . . . . . . . . . . . . 14
     9.2.  Informative References . . . . . . . . . . . . . . . . . . 15
   Appendix A.  Internet Media Type multipart/byteranges  . . . . . . 15
   Appendix B.  Compatibility with Previous Versions  . . . . . . . . 17
     B.1.  Changes from RFC 2068  . . . . . . . . . . . . . . . . . . 17
     B.2.  Changes from RFC 2616  . . . . . . . . . . . . . . . . . . 18
   Appendix C.  Collected ABNF  . . . . . . . . . . . . . . . . . . . 18
   Appendix D.  Change Log (to be removed by RFC Editor before
                publication)  . . . . . . . . . . . . . . . . . . . . 19
     D.1.  Since RFC2616  . . . . . . . . . . . . . . . . . . . . . . 19
     D.2.  Since draft-ietf-httpbis-p5-range-00 . . . . . . . . . . . 20
     D.3.  Since draft-ietf-httpbis-p5-range-01 . . . . . . . . . . . 20
     D.4.  Since draft-ietf-httpbis-p5-range-02 . . . . . . . . . . . 20
     D.5.  Since draft-ietf-httpbis-p5-range-03 . . . . . . . . . . . 20
     D.6.  Since draft-ietf-httpbis-p5-range-04 . . . . . . . . . . . 20
     D.7.  Since draft-ietf-httpbis-p5-range-05 . . . . . . . . . . . 21
     D.8.  Since draft-ietf-httpbis-p5-range-06 . . . . . . . . . . . 21
   Index  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 23







Fielding, et al.        Expires January 14, 2010                [Page 3]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


1.  Introduction

   HTTP clients often encounter interrupted data transfers as a result
   of cancelled requests or dropped connections.  When a cache has
   stored a partial representation, it is desirable to request the
   remainder of that representation in a subsequent request rather than
   transfer the entire representation.  There are also a number of Web
   applications that benefit from being able to request only a subset of
   a larger representation, such as a single page of a very large
   document or only part of an image to be rendered by a device with
   limited local storage.

   This document defines HTTP/1.1 range requests, partial responses, and
   the multipart/byteranges media type.  The protocol for range requests
   is an OPTIONAL feature of HTTP, designed so resources or recipients
   that do not implement this feature can respond as if it is a normal
   GET request without impacting interoperability.  Partial responses
   are indicated by a distinct status code to not be mistaken for full
   responses by intermediate caches that might not implement the
   feature.

   Although the HTTP range request mechanism is designed to allow for
   extensible range types, this specification only defines requests for
   byte ranges.

1.1.  Requirements

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   An implementation is not compliant if it fails to satisfy one or more
   of the MUST or REQUIRED level requirements for the protocols it
   implements.  An implementation that satisfies all the MUST or
   REQUIRED level and all the SHOULD level requirements for its
   protocols is said to be "unconditionally compliant"; one that
   satisfies all the MUST level requirements but not all the SHOULD
   level requirements for its protocols is said to be "conditionally
   compliant."

1.2.  Syntax Notation

   This specification uses the ABNF syntax defined in Section 1.2 of
   [Part1] (which extends the syntax defined in [RFC5234] with a list
   rule).  Appendix C shows the collected ABNF, with the list rule
   expanded.

   The following core rules are included by reference, as defined in



Fielding, et al.        Expires January 14, 2010                [Page 4]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   [RFC5234], Appendix B.1: ALPHA (letters), CR (carriage return), CRLF
   (CR LF), CTL (controls), DIGIT (decimal 0-9), DQUOTE (double quote),
   HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed), OCTET (any 8-bit
   sequence of data), SP (space), VCHAR (any visible USASCII character),
   and WSP (whitespace).

1.2.1.  Core Rules

   The core rules below are defined in Section 1.2.2 of [Part1]:

     token      = <token, defined in [Part1], Section 1.2.2>
     OWS        = <OWS, defined in [Part1], Section 1.2.2>

1.2.2.  ABNF Rules defined in other Parts of the Specification

   The ABNF rules below are defined in other parts:

     HTTP-date  = <HTTP-date, defined in [Part1], Section 3.2>


     entity-tag = <entity-tag, defined in [Part4], Section 2>


2.  Range Units

   HTTP/1.1 allows a client to request that only part (a range of) the
   response entity be included within the response.  HTTP/1.1 uses range
   units in the Range (Section 5.4) and Content-Range (Section 5.2)
   header fields.  An entity can be broken down into subranges according
   to various structural units.

     range-unit       = bytes-unit / other-range-unit
     bytes-unit       = "bytes"
     other-range-unit = token

   HTTP/1.1 has been designed to allow implementations of applications
   that do not depend on knowledge of ranges.  The only range unit
   defined by HTTP/1.1 is "bytes".

   If a range unit is not understood in a request, a server MUST ignore
   the whole Range header (Section 5.4).  If a range unit is not
   understood in a response, an intermediary SHOULD pass the response to
   the client; a client MUST fail.


3.  Status Code Definitions





Fielding, et al.        Expires January 14, 2010                [Page 5]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


3.1.  206 Partial Content

   The server has fulfilled the partial GET request for the resource.
   The request MUST have included a Range header field (Section 5.4)
   indicating the desired range, and MAY have included an If-Range
   header field (Section 5.3) to make the request conditional.

   The response MUST include the following header fields:

   o  Either a Content-Range header field (Section 5.2) indicating the
      range included with this response, or a multipart/byteranges
      Content-Type including Content-Range fields for each part.  If a
      Content-Length header field is present in the response, its value
      MUST match the actual number of OCTETs transmitted in the message-
      body.

   o  Date

   o  ETag and/or Content-Location, if the header would have been sent
      in a 200 response to the same request

   o  Expires, Cache-Control, and/or Vary, if the field-value might
      differ from that sent in any previous response for the same
      variant

   If the 206 response is the result of an If-Range request, the
   response SHOULD NOT include other entity-headers.  Otherwise, the
   response MUST include all of the entity-headers that would have been
   returned with a 200 (OK) response to the same request.

   A cache MUST NOT combine a 206 response with other previously cached
   content if the ETag or Last-Modified headers do not match exactly,
   see Section 4.

   A cache that does not support the Range and Content-Range headers
   MUST NOT cache 206 (Partial Content) responses.  Furthermore, if a
   response uses a range unit that is not understood by the cache, then
   it MUST NOT be cached either.

3.2.  416 Requested Range Not Satisfiable

   A server SHOULD return a response with this status code if a request
   included a Range request-header field (Section 5.4), and none of the
   ranges-specifier values in this field overlap the current extent of
   the selected resource, and the request did not include an If-Range
   request-header field.  (For byte-ranges, this means that the first-
   byte-pos of all of the byte-range-spec values were greater than the
   current length of the selected resource.)



Fielding, et al.        Expires January 14, 2010                [Page 6]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   When this status code is returned for a byte-range request, the
   response SHOULD include a Content-Range entity-header field
   specifying the current length of the selected resource (see
   Section 5.2).  This response MUST NOT use the multipart/byteranges
   content-type.


4.  Combining Ranges

   A response might transfer only a subrange of an entity-body, either
   the request included one or more Range specifications, or because a
   connection was broken prematurely.  After several such transfers, a
   cache might have received several ranges of the same entity-body.

   If a cache has a stored non-empty set of subranges for an entity, and
   an incoming response transfers another subrange, the cache MAY
   combine the new subrange with the existing set if both the following
   conditions are met:

   o  Both the incoming response and the cache entry have a cache
      validator.

   o  The two cache validators match using the strong comparison
      function (see Section 4 of [Part4]).

   If either requirement is not met, the cache MUST use only the most
   recent partial response (based on the Date values transmitted with
   every response, and using the incoming response if these values are
   equal or missing), and MUST discard the other partial information.


5.  Header Field Definitions

   This section defines the syntax and semantics of HTTP/1.1 header
   fields related to range requests and partial responses.

   For entity-header fields, both sender and recipient refer to either
   the client or the server, depending on who sends and who receives the
   entity.

5.1.  Accept-Ranges

   The response-header "Accept-Ranges" field allows the server to
   indicate its acceptance of range requests for a resource:

     Accept-Ranges     = "Accept-Ranges" ":" OWS Accept-Ranges-v
     Accept-Ranges-v   = acceptable-ranges
     acceptable-ranges = 1#range-unit / "none"



Fielding, et al.        Expires January 14, 2010                [Page 7]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   Origin servers that accept byte-range requests MAY send

     Accept-Ranges: bytes

   but are not required to do so.  Clients MAY generate range requests
   without having received this header for the resource involved.  Range
   units are defined in Section 2.

   Servers that do not accept any kind of range request for a resource
   MAY send

     Accept-Ranges: none

   to advise the client not to attempt a range request.

5.2.  Content-Range

   The entity-header "Content-Range" is sent with a partial entity-body
   to specify where in the full entity-body the partial body should be
   applied.  Range units are defined in Section 2.

     Content-Range = "Content-Range" ":" OWS Content-Range-v
     Content-Range-v = content-range-spec

     content-range-spec      = byte-content-range-spec
                             / other-content-range-spec
     byte-content-range-spec = bytes-unit SP
                               byte-range-resp-spec "/"
                               ( instance-length / "*" )

     byte-range-resp-spec    = (first-byte-pos "-" last-byte-pos)
                             / "*"

     instance-length         = 1*DIGIT

     other-content-range-spec = other-range-unit SP
                                other-range-resp-spec
     other-range-resp-spec    = *CHAR

   The header SHOULD indicate the total length of the full entity-body,
   unless this length is unknown or difficult to determine.  The
   asterisk "*" character means that the instance-length is unknown at
   the time when the response was generated.

   Unlike byte-ranges-specifier values (see Section 5.4.1), a byte-
   range-resp-spec MUST only specify one range, and MUST contain
   absolute byte positions for both the first and last byte of the
   range.



Fielding, et al.        Expires January 14, 2010                [Page 8]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   A byte-content-range-spec with a byte-range-resp-spec whose last-
   byte-pos value is less than its first-byte-pos value, or whose
   instance-length value is less than or equal to its last-byte-pos
   value, is invalid.  The recipient of an invalid byte-content-range-
   spec MUST ignore it and any content transferred along with it.

   In the case of a byte range request: A server sending a response with
   status code 416 (Requested range not satisfiable) SHOULD include a
   Content-Range field with a byte-range-resp-spec of "*".  The
   instance-length specifies the current length of the selected
   resource.  A response with status code 206 (Partial Content) MUST NOT
   include a Content-Range field with a byte-range-resp-spec of "*".

   Examples of byte-content-range-spec values, assuming that the entity
   contains a total of 1234 bytes:

   o  The first 500 bytes:

        bytes 0-499/1234

   o  The second 500 bytes:

        bytes 500-999/1234

   o  All except for the first 500 bytes:

        bytes 500-1233/1234

   o  The last 500 bytes:

        bytes 734-1233/1234

   When an HTTP message includes the content of a single range (for
   example, a response to a request for a single range, or to a request
   for a set of ranges that overlap without any holes), this content is
   transmitted with a Content-Range header, and a Content-Length header
   showing the number of bytes actually transferred.  For example,

     HTTP/1.1 206 Partial Content
     Date: Wed, 15 Nov 1995 06:25:24 GMT
     Last-Modified: Wed, 15 Nov 1995 04:58:08 GMT
     Content-Range: bytes 21010-47021/47022
     Content-Length: 26012
     Content-Type: image/gif

   When an HTTP message includes the content of multiple ranges (for
   example, a response to a request for multiple non-overlapping
   ranges), these are transmitted as a multipart message.  The multipart



Fielding, et al.        Expires January 14, 2010                [Page 9]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   media type used for this purpose is "multipart/byteranges" as defined
   in Appendix A.  See Appendix B.1 for a compatibility issue.

   A response to a request for a single range MUST NOT be sent using the
   multipart/byteranges media type.  A response to a request for
   multiple ranges, whose result is a single range, MAY be sent as a
   multipart/byteranges media type with one part.  A client that cannot
   decode a multipart/byteranges message MUST NOT ask for multiple
   ranges in a single request.

   When a client requests multiple byte-ranges in one request, the
   server SHOULD return them in the order that they appeared in the
   request.

   If the server ignores a byte-range-spec because it is syntactically
   invalid, the server SHOULD treat the request as if the invalid Range
   header field did not exist.  (Normally, this means return a 200
   response containing the full entity).

   If the server receives a request (other than one including an If-
   Range request-header field) with an unsatisfiable Range request-
   header field (that is, all of whose byte-range-spec values have a
   first-byte-pos value greater than the current length of the selected
   resource), it SHOULD return a response code of 416 (Requested range
   not satisfiable) (Section 3.2).

      Note: clients cannot depend on servers to send a 416 (Requested
      range not satisfiable) response instead of a 200 (OK) response for
      an unsatisfiable Range request-header, since not all servers
      implement this request-header.

5.3.  If-Range

   If a client has a partial copy of an entity in its cache, and wishes
   to have an up-to-date copy of the entire entity in its cache, it
   could use the Range request-header with a conditional GET (using
   either or both of If-Unmodified-Since and If-Match.)  However, if the
   condition fails because the entity has been modified, the client
   would then have to make a second request to obtain the entire current
   entity-body.

   The request header "If-Range" allows a client to "short-circuit" the
   second request.  Informally, its meaning is `if the entity is
   unchanged, send me the part(s) that I am missing; otherwise, send me
   the entire new entity'.

     If-Range   = "If-Range" ":" OWS If-Range-v
     If-Range-v = entity-tag / HTTP-date



Fielding, et al.        Expires January 14, 2010               [Page 10]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   If the client has no entity tag for an entity, but does have a Last-
   Modified date, it MAY use that date in an If-Range header.  (The
   server can distinguish between a valid HTTP-date and any form of
   entity-tag by examining no more than two characters.)  The If-Range
   header SHOULD only be used together with a Range header, and MUST be
   ignored if the request does not include a Range header, or if the
   server does not support the sub-range operation.

   If the entity tag given in the If-Range header matches the current
   entity tag for the entity, then the server SHOULD provide the
   specified sub-range of the entity using a 206 (Partial Content)
   response.  If the entity tag does not match, then the server SHOULD
   return the entire entity using a 200 (OK) response.

5.4.  Range

5.4.1.  Byte Ranges

   Since all HTTP entities are represented in HTTP messages as sequences
   of bytes, the concept of a byte range is meaningful for any HTTP
   entity.  (However, not all clients and servers need to support byte-
   range operations.)

   Byte range specifications in HTTP apply to the sequence of bytes in
   the entity-body (not necessarily the same as the message-body).

   A byte range operation MAY specify a single range of bytes, or a set
   of ranges within a single entity.

     byte-ranges-specifier = bytes-unit "=" byte-range-set
     byte-range-set  = 1#( byte-range-spec / suffix-byte-range-spec )
     byte-range-spec = first-byte-pos "-" [ last-byte-pos ]
     first-byte-pos  = 1*DIGIT
     last-byte-pos   = 1*DIGIT

   The first-byte-pos value in a byte-range-spec gives the byte-offset
   of the first byte in a range.  The last-byte-pos value gives the
   byte-offset of the last byte in the range; that is, the byte
   positions specified are inclusive.  Byte offsets start at zero.

   If the last-byte-pos value is present, it MUST be greater than or
   equal to the first-byte-pos in that byte-range-spec, or the byte-
   range-spec is syntactically invalid.  The recipient of a byte-range-
   set that includes one or more syntactically invalid byte-range-spec
   values MUST ignore the header field that includes that byte-range-
   set.

   If the last-byte-pos value is absent, or if the value is greater than



Fielding, et al.        Expires January 14, 2010               [Page 11]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   or equal to the current length of the entity-body, last-byte-pos is
   taken to be equal to one less than the current length of the entity-
   body in bytes.

   By its choice of last-byte-pos, a client can limit the number of
   bytes retrieved without knowing the size of the entity.

     suffix-byte-range-spec = "-" suffix-length
     suffix-length = 1*DIGIT

   A suffix-byte-range-spec is used to specify the suffix of the entity-
   body, of a length given by the suffix-length value.  (That is, this
   form specifies the last N bytes of an entity-body.)  If the entity is
   shorter than the specified suffix-length, the entire entity-body is
   used.

   If a syntactically valid byte-range-set includes at least one byte-
   range-spec whose first-byte-pos is less than the current length of
   the entity-body, or at least one suffix-byte-range-spec with a non-
   zero suffix-length, then the byte-range-set is satisfiable.
   Otherwise, the byte-range-set is unsatisfiable.  If the byte-range-
   set is unsatisfiable, the server SHOULD return a response with a
   status of 416 (Requested range not satisfiable).  Otherwise, the
   server SHOULD return a response with a status of 206 (Partial
   Content) containing the satisfiable ranges of the entity-body.

   Examples of byte-ranges-specifier values (assuming an entity-body of
   length 10000):

   o  The first 500 bytes (byte offsets 0-499, inclusive):

        bytes=0-499

   o  The second 500 bytes (byte offsets 500-999, inclusive):

        bytes=500-999

   o  The final 500 bytes (byte offsets 9500-9999, inclusive):

        bytes=-500

      Or:

        bytes=9500-

   o  The first and last bytes only (bytes 0 and 9999):

        bytes=0-0,-1



Fielding, et al.        Expires January 14, 2010               [Page 12]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   o  Several legal but not canonical specifications of the second 500
      bytes (byte offsets 500-999, inclusive):

        bytes=500-600,601-999
        bytes=500-700,601-999

5.4.2.  Range Retrieval Requests

   HTTP retrieval requests using conditional or unconditional GET
   methods MAY request one or more sub-ranges of the entity, instead of
   the entire entity, using the Range request header, which applies to
   the entity returned as the result of the request:

     Range   = "Range" ":" OWS Range-v
     Range-v = byte-ranges-specifier
             / other-ranges-specifier
     other-ranges-specifier = 1*CHAR

   A server MAY ignore the Range header.  However, HTTP/1.1 origin
   servers and intermediate caches ought to support byte ranges when
   possible, since Range supports efficient recovery from partially
   failed transfers, and supports efficient partial retrieval of large
   entities.

   If the server supports the Range header and the specified range or
   ranges are appropriate for the entity:

   o  The presence of a Range header in an unconditional GET modifies
      what is returned if the GET is otherwise successful.  In other
      words, the response carries a status code of 206 (Partial Content)
      instead of 200 (OK).

   o  The presence of a Range header in a conditional GET (a request
      using one or both of If-Modified-Since and If-None-Match, or one
      or both of If-Unmodified-Since and If-Match) modifies what is
      returned if the GET is otherwise successful and the condition is
      true.  It does not affect the 304 (Not Modified) response returned
      if the conditional is false.

   In some cases, it might be more appropriate to use the If-Range
   header (see Section 5.3) in addition to the Range header.

   If a proxy that supports ranges receives a Range request, forwards
   the request to an inbound server, and receives an entire entity in
   reply, it SHOULD only return the requested range to its client.  It
   SHOULD store the entire received response in its cache if that is
   consistent with its cache allocation policies.




Fielding, et al.        Expires January 14, 2010               [Page 13]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


6.  IANA Considerations

6.1.  Message Header Registration

   The Message Header Registry located at <http://www.iana.org/
   assignments/message-headers/message-header-index.html> should be
   updated with the permanent registrations below (see [RFC3864]):

   +-------------------+----------+----------+-------------+
   | Header Field Name | Protocol | Status   | Reference   |
   +-------------------+----------+----------+-------------+
   | Accept-Ranges     | http     | standard | Section 5.1 |
   | Content-Range     | http     | standard | Section 5.2 |
   | If-Range          | http     | standard | Section 5.3 |
   | Range             | http     | standard | Section 5.4 |
   +-------------------+----------+----------+-------------+

   The change controller is: "IETF (iesg@ietf.org) - Internet
   Engineering Task Force".


7.  Security Considerations

   No additional security considerations have been identified beyond
   those applicable to HTTP in general [Part1].


8.  Acknowledgments

   Most of the specification of ranges is based on work originally done
   by Ari Luotonen and John Franks, with additional input from Steve
   Zilles, Daniel W. Connolly, Roy T. Fielding, Jim Gettys, Martin
   Hamilton, Koen Holtman, Shel Kaplan, Paul Leach, Alex Lopez-Ortiz,
   Larry Masinter, Jeff Mogul, Lou Montulli, David W. Morris, Luigi
   Rizzo, and Bill Weihl.


9.  References

9.1.  Normative References

   [Part1]    Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed.,
              and J. Reschke, Ed., "HTTP/1.1, part 1: URIs, Connections,
              and Message Parsing", draft-ietf-httpbis-p1-messaging-07
              (work in progress), July 2009.

   [Part3]    Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H.,



Fielding, et al.        Expires January 14, 2010               [Page 14]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


              Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed.,
              and J. Reschke, Ed., "HTTP/1.1, part 3: Message Payload
              and Content Negotiation", draft-ietf-httpbis-p3-payload-07
              (work in progress), July 2009.

   [Part4]    Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed.,
              and J. Reschke, Ed., "HTTP/1.1, part 4: Conditional
              Requests", draft-ietf-httpbis-p4-conditional-07 (work in
              progress), July 2009.

   [Part6]    Fielding, R., Ed., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., Berners-Lee, T., Lafon, Y., Ed.,
              Nottingham, M., Ed., and J. Reschke, Ed., "HTTP/1.1, part
              6: Caching", draft-ietf-httpbis-p6-cache-07 (work in
              progress), July 2009.

   [RFC2046]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part Two: Media Types", RFC 2046,
              November 1996.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC5234]  Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234, January 2008.

9.2.  Informative References

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [RFC3864]  Klyne, G., Nottingham, M., and J. Mogul, "Registration
              Procedures for Message Header Fields", BCP 90, RFC 3864,
              September 2004.

   [RFC4288]  Freed, N. and J. Klensin, "Media Type Specifications and
              Registration Procedures", BCP 13, RFC 4288, December 2005.


Appendix A.  Internet Media Type multipart/byteranges

   When an HTTP 206 (Partial Content) response message includes the
   content of multiple ranges (a response to a request for multiple non-
   overlapping ranges), these are transmitted as a multipart message-
   body ([RFC2046], Section 5.1).  The media type for this purpose is
   called "multipart/byteranges".  The following is to be registered



Fielding, et al.        Expires January 14, 2010               [Page 15]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   with IANA [RFC4288].

   The multipart/byteranges media type includes one or more parts, each
   with its own Content-Type and Content-Range fields.  The required
   boundary parameter specifies the boundary string used to separate
   each body-part.

   Type name:  multipart

   Subtype name:  byteranges

   Required parameters:  boundary

   Optional parameters:  none

   Encoding considerations:  only "7bit", "8bit", or "binary" are
      permitted

   Security considerations:  none

   Interoperability considerations:  none

   Published specification:  This specification (see Appendix A).

   Applications that use this media type:

   Additional information:

      Magic number(s):  none

      File extension(s):  none

      Macintosh file type code(s):  none

   Person and email address to contact for further information:  See
      Authors Section.

   Intended usage:  COMMON

   Restrictions on usage:  none

   Author/Change controller:  IESG









Fielding, et al.        Expires January 14, 2010               [Page 16]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   For example:

     HTTP/1.1 206 Partial Content
     Date: Wed, 15 Nov 1995 06:25:24 GMT
     Last-Modified: Wed, 15 Nov 1995 04:58:08 GMT
     Content-type: multipart/byteranges; boundary=THIS_STRING_SEPARATES

     --THIS_STRING_SEPARATES
     Content-type: application/pdf
     Content-range: bytes 500-999/8000

     ...the first range...
     --THIS_STRING_SEPARATES
     Content-type: application/pdf
     Content-range: bytes 7000-7999/8000

     ...the second range
     --THIS_STRING_SEPARATES--

   Notes:

   1.  Additional CRLFs may precede the first boundary string in the
       entity.

   2.  Although [RFC2046] permits the boundary string to be quoted, some
       existing implementations handle a quoted boundary string
       incorrectly.

   3.  A number of browsers and servers were coded to an early draft of
       the byteranges specification to use a media type of multipart/
       x-byteranges, which is almost, but not quite compatible with the
       version documented in HTTP/1.1.


Appendix B.  Compatibility with Previous Versions

B.1.  Changes from RFC 2068

   Transfer-coding and message lengths all interact in ways that
   required fixing exactly when chunked encoding is used (to allow for
   transfer encoding that may not be self delimiting); it was important
   to straighten out exactly how message lengths are computed.
   (Section 5.2, see also [Part1], [Part3] and [Part6])

   There are situations where a server (especially a proxy) does not
   know the full length of a response but is capable of serving a
   byterange request.  We therefore need a mechanism to allow byteranges
   with a content-range not indicating the full length of the message.



Fielding, et al.        Expires January 14, 2010               [Page 17]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   (Section 5.2)

   Range request responses would become very verbose if all meta-data
   were always returned; by allowing the server to only send needed
   headers in a 206 response, this problem can be avoided.  (Section 3.1
   and 5.3)

   Fix problem with unsatisfiable range requests; there are two cases:
   syntactic problems, and range doesn't exist in the document.  The 416
   status code was needed to resolve this ambiguity needed to indicate
   an error for a byte range request that falls outside of the actual
   contents of a document.  (Section 3.2, 5.2)

B.2.  Changes from RFC 2616

   Clarify that it is not ok to use a weak cache validator in a 206
   response.  (Section 3.1)

   Clarify that multipart/byteranges can consist of a single part.
   (Appendix A)


Appendix C.  Collected ABNF

   Accept-Ranges = "Accept-Ranges:" OWS Accept-Ranges-v
   Accept-Ranges-v = acceptable-ranges

   Content-Range = "Content-Range:" OWS Content-Range-v
   Content-Range-v = content-range-spec

   HTTP-date = <HTTP-date, defined in [Part1], Section 3.2>

   If-Range = "If-Range:" OWS If-Range-v
   If-Range-v = entity-tag / HTTP-date

   OWS = <OWS, defined in [Part1], Section 1.2.2>

   Range = "Range:" OWS Range-v
   Range-v = byte-ranges-specifier / other-ranges-specifier

   acceptable-ranges = ( *( "," OWS ) range-unit *( OWS "," [ OWS
    range-unit ] ) ) / "none"

   byte-content-range-spec = bytes-unit SP byte-range-resp-spec "/" (
    instance-length / "*" )
   byte-range-resp-spec = ( first-byte-pos "-" last-byte-pos ) / "*"





Fielding, et al.        Expires January 14, 2010               [Page 18]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   byte-range-set = ( *( "," OWS ) byte-range-spec ) / (
    suffix-byte-range-spec *( OWS "," [ ( OWS byte-range-spec ) /
    suffix-byte-range-spec ] ) )
   byte-range-spec = first-byte-pos "-" [ last-byte-pos ]
   byte-ranges-specifier = bytes-unit "=" byte-range-set
   bytes-unit = "bytes"

   content-range-spec = byte-content-range-spec /
    other-content-range-spec

   entity-tag = <entity-tag, defined in [Part4], Section 2>

   first-byte-pos = 1*DIGIT

   instance-length = 1*DIGIT

   last-byte-pos = 1*DIGIT

   other-content-range-spec = other-range-unit SP other-range-resp-spec
   other-range-resp-spec = *CHAR
   other-range-unit = token
   other-ranges-specifier = 1*CHAR

   range-unit = bytes-unit / other-range-unit

   suffix-byte-range-spec = "-" suffix-length
   suffix-length = 1*DIGIT

   token = <token, defined in [Part1], Section 1.2.2>



   ABNF diagnostics:

   ; Accept-Ranges defined but not used
   ; Content-Range defined but not used
   ; If-Range defined but not used
   ; Range defined but not used


Appendix D.  Change Log (to be removed by RFC Editor before publication)

D.1.  Since RFC2616

   Extracted relevant partitions from [RFC2616].






Fielding, et al.        Expires January 14, 2010               [Page 19]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


D.2.  Since draft-ietf-httpbis-p5-range-00

   Closed issues:

   o  <http://tools.ietf.org/wg/httpbis/trac/ticket/18>: "Cache
      validators in 206 responses"
      (<http://purl.org/NET/http-errata#ifrange206>)

   o  <http://tools.ietf.org/wg/httpbis/trac/ticket/35>: "Normative and
      Informative references"

   o  <http://tools.ietf.org/wg/httpbis/trac/ticket/86>: "Normative up-
      to-date references"

D.3.  Since draft-ietf-httpbis-p5-range-01

   Closed issues:

   o  <http://tools.ietf.org/wg/httpbis/trac/ticket/55>: "Updating to
      RFC4288"

   Ongoing work on ABNF conversion
   (<http://tools.ietf.org/wg/httpbis/trac/ticket/36>):

   o  Add explicit references to BNF syntax and rules imported from
      other parts of the specification.

D.4.  Since draft-ietf-httpbis-p5-range-02

   Ongoing work on IANA Message Header Registration
   (<http://tools.ietf.org/wg/httpbis/trac/ticket/40>):

   o  Reference RFC 3984, and update header registrations for headers
      defined in this document.

D.5.  Since draft-ietf-httpbis-p5-range-03

D.6.  Since draft-ietf-httpbis-p5-range-04

   Closed issues:

   o  <http://tools.ietf.org/wg/httpbis/trac/ticket/133>: "multipart/
      byteranges minimum number of parts"

   Ongoing work on ABNF conversion
   (<http://tools.ietf.org/wg/httpbis/trac/ticket/36>):





Fielding, et al.        Expires January 14, 2010               [Page 20]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   o  Use "/" instead of "|" for alternatives.

   o  Introduce new ABNF rules for "bad" whitespace ("BWS"), optional
      whitespace ("OWS") and required whitespace ("RWS").

   o  Rewrite ABNFs to spell out whitespace rules, factor out header
      value format definitions.

D.7.  Since draft-ietf-httpbis-p5-range-05

   Closed issues:

   o  <http://tools.ietf.org/wg/httpbis/trac/ticket/142>: "State base
      for *-byte-pos and suffix-length"

   Ongoing work on Custom Ranges
   (<http://tools.ietf.org/wg/httpbis/trac/ticket/85>):

   o  Remove bias in favor of byte ranges; allow custom ranges in ABNF.

   Final work on ABNF conversion
   (<http://tools.ietf.org/wg/httpbis/trac/ticket/36>):

   o  Add appendix containing collected and expanded ABNF, reorganize
      ABNF introduction.

D.8.  Since draft-ietf-httpbis-p5-range-06

   Closed issues:

   o  <http://tools.ietf.org/wg/httpbis/trac/ticket/161>: "base for
      numeric protocol elements"


Index

   2
      206 Partial Content (status code)  6

   4
      416 Requested Range Not Satisfiable (status code)  6

   A
      Accept-Ranges header  7

   C
      Content-Range header  8




Fielding, et al.        Expires January 14, 2010               [Page 21]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   G
      Grammar
         Accept-Ranges  7
         Accept-Ranges-v  7
         acceptable-ranges  7
         byte-content-range-spec  8
         byte-range-resp-spec  8
         byte-range-set  11
         byte-range-spec  11
         byte-ranges-specifier  11
         bytes-unit  5
         Content-Range  8
         content-range-spec  8
         Content-Range-v  8
         first-byte-pos  11
         If-Range  10
         If-Range-v  10
         instance-length  8
         last-byte-pos  11
         other-range-unit  5
         Range  13
         range-unit  5
         ranges-specifier  11
         suffix-byte-range-spec  12
         suffix-length  12

   H
      Headers
         Accept-Ranges  7
         Content-Range  8
         If-Range  10
         Range  11

   I
      If-Range header  10

   M
      Media Type
         multipart/byteranges  15
         multipart/x-byteranges  17
      multipart/byteranges Media Type  15
      multipart/x-byteranges Media Type  17

   R
      Range header  11

   S
      Status Codes



Fielding, et al.        Expires January 14, 2010               [Page 22]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


         206 Partial Content  6
         416 Requested Range Not Satisfiable  6


Authors' Addresses

   Roy T. Fielding (editor)
   Day Software
   23 Corporate Plaza DR, Suite 280
   Newport Beach, CA  92660
   USA

   Phone: +1-949-706-5300
   Fax:   +1-949-706-5305
   Email: fielding@gbiv.com
   URI:   http://roy.gbiv.com/


   Jim Gettys
   One Laptop per Child
   21 Oak Knoll Road
   Carlisle, MA  01741
   USA

   Email: jg@laptop.org
   URI:   http://www.laptop.org/


   Jeffrey C. Mogul
   Hewlett-Packard Company
   HP Labs, Large Scale Systems Group
   1501 Page Mill Road, MS 1177
   Palo Alto, CA  94304
   USA

   Email: JeffMogul@acm.org


   Henrik Frystyk Nielsen
   Microsoft Corporation
   1 Microsoft Way
   Redmond, WA  98052
   USA

   Email: henrikn@microsoft.com






Fielding, et al.        Expires January 14, 2010               [Page 23]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   Larry Masinter
   Adobe Systems, Incorporated
   345 Park Ave
   San Jose, CA  95110
   USA

   Email: LMM@acm.org
   URI:   http://larry.masinter.net/


   Paul J. Leach
   Microsoft Corporation
   1 Microsoft Way
   Redmond, WA  98052

   Email: paulle@microsoft.com


   Tim Berners-Lee
   World Wide Web Consortium
   MIT Computer Science and Artificial Intelligence Laboratory
   The Stata Center, Building 32
   32 Vassar Street
   Cambridge, MA  02139
   USA

   Email: timbl@w3.org
   URI:   http://www.w3.org/People/Berners-Lee/


   Yves Lafon (editor)
   World Wide Web Consortium
   W3C / ERCIM
   2004, rte des Lucioles
   Sophia-Antipolis, AM  06902
   France

   Email: ylafon@w3.org
   URI:   http://www.raubacapeu.net/people/yves/












Fielding, et al.        Expires January 14, 2010               [Page 24]


Internet-Draft              HTTP/1.1, Part 5                   July 2009


   Julian F. Reschke (editor)
   greenbytes GmbH
   Hafenweg 16
   Muenster, NW  48155
   Germany

   Phone: +49 251 2807760
   Fax:   +49 251 2807761
   Email: julian.reschke@greenbytes.de
   URI:   http://greenbytes.de/tech/webdav/









































Fielding, et al.        Expires January 14, 2010               [Page 25]