INTERNET-DRAFT                                        Masanori Miyazawa
Intended status: Standards Truck                          KDDI R&D Labs
Expires: October 16, 2011
                                                        Tomohiro Otani
                                                          Kenji Kumaki
                                                      KDDI Corporation

                                                      Thomas D. Nadeau

                                                         April 15, 2011

Traffic Engineering Database Management Information Base in support of
                             MPLS-TE/GMPLS

                 draft-ietf-ccamp-gmpls-ted-mib-08.txt



Status of this Memo

   This Internet-Draft is submitted to IETF in full conformance with
  the provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups. Note that other
   groups may also distribute working documents as Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time. It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
        http://www.ietf.org/ietf/1id-abstracts.txt
   The list of Internet-Draft Shadow Directories can be accessed at
        http://www.ietf.org/shadow.html.

Copyright Notice

   Copyright (c) 2011 IETF Trust and the persons identified as the
   document authors. All rights reserved.
   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.





T. Otani et al.           Expires Oct. 2011                    [Page 1]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

Abstract

   This memo defines the Management Information Base (MIB) objects in
   order to manage traffic engineering database (TED) information with
   extension in support of Multi-Protocol Label Switching (MPLS) with
   traffic engineering (TE) as well as Generalized MPLS (GMPLS) for use
   with network management protocols.


Table of Contents

Status of this Memo................................................... 1
Abstract.............................................................. 2
1. The Internet-Standard Management Framework......................... 3
2. Introduction....................................................... 3
3. Overview........................................................... 3
3.1 Conventions used in this document................................. 3
3.2 Terminology....................................................... 3
3.3 Acronyms.......................................................... 4
4. Motivations........................................................ 4
5. Brief description of MIB Objects................................... 4
5.1 tedTable.......................................................... 4
5.2 tedLocalIfAddrTable............................................... 4
5.3 tedRemoteIfAddrTable.............................................. 4
5.4 tedSwCapTable..................................................... 5
5.5 tedSrlgTable...................................................... 5
6. Example of the TED MIB module usage................................ 5
7. TED MIB Definitions in support of GMPLS............................ 6
8. Security consideration............................................ 28
9. IANA Considerations............................................... 29
9.1 IANA Considerations for TED-MIB.................................. 29
10. References....................................................... 29
10.1 Normative References............................................ 29
10.2 Informative References.......................................... 29
11. Acknowledgment................................................... 31
12. Authors' Addresses............................................... 31















T. Otani et al.           Expires Oct. 2011                    [Page 2]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

1. The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB. MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI). This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].

2. Introduction

   The OSPF MIB was originally defined for OSPF version2 in support of
   IPv4 [RFC4750] and extended to support the Internet Protocol
   version6(IPv6) as OSPF version3 MIB [RFC5643]. The ISIS MIB is also
   defined as [RFC4444]. On the other side, MPLS/GMPLS based traffic
   engineering has so far extended OSPF/ISIS routing protocol with TE
   functionality [RFC4202], [RFC3630], [RFC5329], [RFC5307], [RFC5305].
   To manage such MPLS-TE/GMPLS networks effectively, routing
   information associated with MPLS/GMPLS TE parameters (TED) is
   preferred for the network management, however, there is no clear
   definition of MPLS/GMPLS TE information in existing MIBs related to
   OSPF(v2 and v3)/ISIS.

   This memo defines the Management Information Base (MIB) objects for
   managing TED in support of MPLS-TE/GMPLS for use with network
   management protocols.

   This MIB module should be used in conjunction with OSPFv2 MIB, OSPF
   v3 MIB and ISIS MIB as well as other MIBs defined in [RFC3812],
   [RFC3813], [RFC4802], [RFC4803] for the management of MPLS/GMPLS
   based traffic engineering information.


3. Overview

3.1 Conventions used in this document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC-2119 [RFC2119].

3.2 Terminology

   Definitions of key terms for MPLS OAM and GMPLS are found in
   [RFC4377] and [RFC3945], and the reader is assumed to be familiar
   with those definitions which are not repeated here.



T. Otani et al.           Expires Oct. 2011                    [Page 3]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

3.3 Acronyms

   FSC:   Fiber switch capable
   GMPLS: Generalized Multi-Protocol Label Switching
   ISIS:  Intermediate System to Intermediate System
   LDP:   Label Distribution Protocol
   LSA:   Link state advertisement
   LSC:   Lambda switch capable
   LSP:   Label Switching Path
   LSR:   Label Switching Router
   MIB:   Management Information Base
   OAM:   Operations and Management
   OA&M:  Operations, Administration and Maintenance.
   OSPF:  Open Shortest Path First
   PSC:   Packet switch capable
   RSVP:  Resource reSerVation Protocol
   SRLG:  Shared risk link group
   TE:    Traffic Engineering
   TED:   Traffic Engineering Database
   TDM:   Time Division Multiplexing


4. Motivations

   The existing OSPFv2, OSPFv3, ISIS, MPLS and GMPLS MIBs do not provide
   for the management interface to retrieve topology information of MPLS
   and GMPLS networks.


5. Brief description of MIB Objects

   The objects described in this section support the management of TED
   described in [RFC4202], [RFC4203] and [RFC5307] for GMPLS extensions
   as well as in [RFC3630] and [RFC5305] for MPLS/GMPLS.

5.1 tedTable

   The tedTable is basically used to indicate TED information of OSPF-TE
   or ISIS-TE. However, this table does not contain information for
   Local/Remote interface IP address, Interface Switching Capability
   Descriptor and Shared Risk Link Group information within the sub-TLVs
   for the Link-TLV.

5.2 tedLocalIfAddrTable

   The tedLocalIfAddrTable is identical to the Local interface IP
   address information in a sub-TLV for the Link-TLV. This is
   independently defined, because the Interface IP Address sub-TLV may
   appear more than once within the same Link-TLV.

5.3 tedRemoteIfAddrTable

   The tedRemoteIfAddrTable is identical to the Remote interface IP
   address information in a sub-TLV of the Link-TLV. Also, this is

T. Otani et al.           Expires Oct. 2011                    [Page 4]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

   utilized independently because one or more local interface IP address
   sub TLVs may exist in the same Link-TLV.

5.4 tedSwCapTable

   The tedSwCapTable represents Interface Switching Capability
   Descriptor information. This is independently defined due to the
   possibility of multiple appearances of the sub TLV within the same
   Link-TLV.

5.5 tedSrlgTable

   The tedSrlgTable contains the Sub-TLV information of Shared Risk Link
   Group (SRLG) information. This is separately defined, because more
   than one sub TLVs may appear in the same Link-TLV.


6.Example of the TED MIB Module Usage

   In this section, we provide an example of the TED MIB module usage.
   The following indicates the information of a numbered TE link
   originated in a GMPLS controlled node. When TE link information is
   retrieved in a MPLS network, GMPLS specific objects such as
   tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable and
   tedSrlgTable are not supported.

   Note that the TED MIB modules are only limited to "read-only" access
   except for tedCreatedDeletedNotificationMaxRate and
   tedStatusChangeNotificationMaxRate. The TED MIB is designed to be
   independent of OSPF or ISIS MIBs, however each TE link information
   belongs to a node or a link which is managed by the routing protocol.

   In tedTable:
   {
   tedAreaId.0.3221225985.16777264              0
   tedRouterId.0.3221225985.16777264    1848783410
   tedLinkStateId.0.3221225985.16777264 805306369
   tedLinkInformationSource.0.3221225985.16777264        ospf(2)
   tedLinkInformationData.0.3221225985.16777264 zeroDotZero
   tedLinkType.0.3221225985.16777264    pointToPoint(1)
   tedLinkState.0.3221225985.16777264   up(1)
   tedRouterIdAddrType.0.3221225985.16777264    ipv4(1)
   tedRouterIdAddr.0.3221225985.16777264192.0.2.1
   tedLinkIdAddrType.0.3221225985.16777264      ipv4(1)
   tedLinkIdAddr.0.3221225985.16777264  192.0.2.10
   tedMetric.0.3221225985.16777264      1
   tedMaxBandwidth.0.3221225985.167772641376193201
   tedMaxReservableBandwidth.0.3221225985.16777264      1376193201
   tedUnreservedBandwidthPri0.0.3221225985.16777264     1375888025
   tedUnreservedBandwidthPri1.0.3221225985.16777264     1375888025
   tedUnreservedBandwidthPri2.0.3221225985.16777264     1375888025
   tedUnreservedBandwidthPri3.0.3221225985.16777264     1375888025
   tedUnreservedBandwidthPri4.0.3221225985.16777264     1375888025
   tedUnreservedBandwidthPri5.0.3221225985.16777264     1375888025

T. Otani et al.           Expires Oct. 2011                    [Page 5]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

   tedUnreservedBandwidthPri6.0.3221225985.16777264     1375888025
   tedUnreservedBandwidthPri7.0.3221225985.16777264     1375888025
   tedAdministrativeGroup.0.3221225985.16777264 0
   tedLocalId.0.3221225985.16777264     0
   tedRemoteId.0.3221225985.16777264    0
   tedLinkProtectionType.0.3221225985.16777264  01 00 00 00 7

   In tedLocalIfAddrTable:
   {
   tedLocalIfAddrType.0.3221225985.16777264.0   ipv4(1)
   tedLocalIfAddr.0.3221225985.16777264.0       192.0.2.21
   }

   In tedRemoteIfAddrTable:
   {
   tedRemoteIfAddrType.0.3221225985.16777264.0  ipv4(1)
   tedRemoteIfAddr.0.3221225985.16777264.0      192.0.2.22
   }

   In tedSwCapTable:
   {
   tedSwCapType.0.3221225985.16777264.1 lsc(150)
   tedSwCapEncoding.0.3221225985.16777264.1     ethernet(2)
   tedSwCapMaxLspBandwidthPri0.0.3221225985.16777264.1  1375888025
   tedSwCapMaxLspBandwidthPri1.0.3221225985.16777264.1  1375888025
   tedSwCapMaxLspBandwidthPri2.0.3221225985.16777264.1  1375888025
   tedSwCapMaxLspBandwidthPri3.0.3221225985.16777264.1  1375888025
   tedSwCapMaxLspBandwidthPri4.0.3221225985.16777264.1  1375888025
   tedSwCapMaxLspBandwidthPri5.0.3221225985.16777264.1  1375888025
   tedSwCapMaxLspBandwidthPri6.0.3221225985.16777264.1  1375888025
   tedSwCapMaxLspBandwidthPri7.0.3221225985.16777264.1  1375888025
   tedSwCapMinLspBandwidth.0.3221225985.16777264.1      0
   tedSwCapIfMtu.0.3221225985.16777264.10
   tedSwCapIndication.0.3221225985.16777264.1   standard(0)
   }

   In tedSrlgTable:
   {
   tedSrlg.0.3221225985.16777264.0      0
   }


7. TED MIB Definitions in support of GMPLS

   TED-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission,
      NOTIFICATION-TYPE
        FROM SNMPv2-SMI                            -- RFC2578
      MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF                           -- RFC2580
      TEXTUAL-CONVENTION, RowPointer
        FROM SNMPv2-TC                             -- RFC2579

T. Otani et al.           Expires Oct. 2011                    [Page 6]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

      IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC
        FROM IANA-GMPLS-TC-MIB                     -- RFC4802
       InetAddress, InetAddressType
        FROM INET-ADDRESS-MIB                      -- RFC3291
      ;

   tedMIB MODULE-IDENTITY
      LAST-UPDATED "201104150000Z"  -- 15 April 2011 00:00:00 GMT
      ORGANIZATION "IETF CCAMP Working Group."
      CONTACT-INFO
         "          Tomohiro Otani
                     otani@kddilabs.jp

                     Masanori Miyazawa
                     ma-miyazawa@kddilabs.jp

                     Thomas D. Nadeau
                     tnadeau@lucidvision.com

                     Kenji Kumaki
                     ke-kumaki@kddilabs.jp

                     Comments and discussion to ccamp@ietf.org"
      DESCRIPTION
           "This MIB contains managed object definitions for TED in
           support of MPLS/GMPLS TE Database.

           Copyright (C) 2011 The IETF Trust. This version of this MIB
           module is part of RFC xxx; see the RFC itself for full legal
           notices."
   -- Revision history.
      REVISION
        "201104150000Z"  -- 15 April 2011 00:00:00 GMT
      DESCRIPTION
        "Initial version. Published as RFC xxx."
     -- RFC-editor pls fill in yyy
      ::= { transmission yyy }
     -- assigned by IANA, see section 9.1 for details

   -- Textual Conventions.

   TedAreaIdTC ::= TEXTUAL-CONVENTION
          DISPLAY-HINT "d"
          STATUS       current
          DESCRIPTION
             "The area identifier of the IGP. If OSPF is used to
   advertise LSA, this represents an ospfArea. If ISIS is used, this
   represents an area address."
          SYNTAX       Unsigned32 (1..4294967295)

   TedRouterIdTC ::= TEXTUAL-CONVENTION
          DISPLAY-HINT "d"
          STATUS       current
          DESCRIPTION

T. Otani et al.           Expires Oct. 2011                    [Page 7]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

             " The router identifier. If OSPF is used to advertise LSA,
   this represents a Router ID. If ISIS is used, this represents a
   System ID."
          SYNTAX       Unsigned32 (1..4294967295)

   TedLinkStateIdTC ::= TEXTUAL-CONVENTION
          DISPLAY-HINT "d"
          STATUS       current
          DESCRIPTION
             " The link state identifier. If OSPF is used, this
   represents an ospfLsdbID. If ISIS is used, this represents an
   isisLSPID."
          SYNTAX       Unsigned32 (1..4294967295)

   -- Top level components of this MIB.

   tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 }
   tedObjects       OBJECT IDENTIFIER ::= { tedMIB 1 }
   tedConformance   OBJECT IDENTIFIER ::= { tedMIB 2 }

   --
   --  TED Table
   --

   tedTable OBJECT-TYPE
      SYNTAX       SEQUENCE OF TedEntry
      MAX-ACCESS   not-accessible
      STATUS       current
      DESCRIPTION
        "This table indicates multiple TED information which has been
   supported by [RFC3630]."
   ::= { tedObjects 1 }

   tedEntry OBJECT-TYPE
       SYNTAX       TedEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
       "This entry contains TED information commonly utilized in both
   MPLS and GMPLS."
      INDEX { tedAreaId, tedRouterId, tedLinkStateId }
   ::= { tedTable 1 }

   TedEntry ::= SEQUENCE {
       tedAreaId                    TedAreaIdTC,
       tedRouterId                  TedRouterIdTC,
       tedLinkStateId               TedLinkStateIdTC,
       tedLinkInformationSource     INTEGER,
       tedLinkInformationData       RowPointer,
       tedLinkState                 INTEGER,
       tedLinkType                  INTEGER,
       tedRouterIdAddrType          InetAddressType,
       tedRouterIdAddr              InetAddress,
       tedLinkIdAddrType            InetAddressType,

T. Otani et al.           Expires Oct. 2011                    [Page 8]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

       tedLinkIdAddr                InetAddress,
       tedMetric                    Integer32,
       tedMaxBandwidth              Unsigned32,
       tedMaxReservableBandwidth    Unsigned32,
       tedUnreservedBandwidthPri0   Unsigned32,
       tedUnreservedBandwidthPri1   Unsigned32,
       tedUnreservedBandwidthPri2   Unsigned32,
       tedUnreservedBandwidthPri3   Unsigned32,
       tedUnreservedBandwidthPri4   Unsigned32,
       tedUnreservedBandwidthPri5   Unsigned32,
       tedUnreservedBandwidthPri6   Unsigned32,
       tedUnreservedBandwidthPri7   Unsigned32,
       tedAdministrativeGroup       Integer32,
       tedLocalId                   Integer32,
       tedRemoteId                  Integer32,
       tedLinkProtectionType        BITS
       }

   tedAreaId OBJECT-TYPE
       SYNTAX       TedAreaIdTC
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This object indicates the area identifier of the IGP. If OSPF
   is used to advertise LSA, this represents an ospfArea. If ISIS is
   used, this represents an area address. Otherwise, this represents
   zero."
       REFERENCE
         " OSPF Version 2, RFC2328, C.2
           OSPF for IPv6, RFC5340, C.2 "
   ::= { tedEntry 1 }

   tedRouterId OBJECT-TYPE
       SYNTAX       TedRouterIdTC
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This object indicates the router identifier. If OSPF is used
   to advertise LSA, this represents a Router ID. If ISIS is used, this
   represents a System ID. Otherwise, this represents zero."
       REFERENCE
         " OSPF Version 2, RFC2328, C.1
           OSPF for IPv6, RFC5340, C.1 "
   ::= { tedEntry 2 }

   tedLinkStateId OBJECT-TYPE
       SYNTAX       TedLinkStateIdTC
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This object indicates the link state identifier. If OSPF is
   used, this represents an ospfLsdbID. If ISIS is used, this represents
   an isisLSPID. Otherwise, this represents a unique identifier within a
   node."

T. Otani et al.           Expires Oct. 2011                    [Page 9]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

       REFERENCE
         "OSPF Version 2, RFC2328, A.4.1,
          OSPF for IPv6, RFC5340, A.4.2"
   ::= { tedEntry 3 }

   tedLinkInformationSource OBJECT-TYPE
       SYNTAX       INTEGER {
                    unknown(0),
                    locallyConfigured(1),
                    ospfv2(2),
                    ospfv3(3),
                    isis(4),
                    other(5)
                    }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the source of the information about the
   TE link."
     ::= { tedEntry 4 }

   tedLinkInformationData OBJECT-TYPE
       SYNTAX       RowPointer
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
       "This object cross-references the source of the information
       about this TE link and should be interpretted in the context of
       tedLinkInformationSource.
          If tedLinkInformationSource has the value unknown(0), this
       object SHOULD contain a value of zeroDotZero.
          If tedLinkInformationSource has the value
       locallyConfigured(1), this object MAY contain the identifier of
       the corresponding row entry in the teLinkTable of TE-LINK-STD-
       MIB[RFC4220], the identifier of the corresponding row in a local
       proprietary TE link MIB module, or the value of zeroDotZero
       otherwise.
          If tedLinkInformationSource has the value ospfv2(2)and
       ospfv3(3), this object MAY contain the identifier of the
       corresponding row entry in the ospfLocalLsdbTable of OSPFv2-
       MIB[RFC4750] and the ospfv3AreaLsdbTable of OSPFv3-MIB[RFC5634],
       or the value of zeroDotZero otherwise.
          If tedLinkInformationSource has the value isis(4) this object
       MAY contain the identifier of the corresponding row entry in the
       isisAreaAddr of ISIS-MIB [RFC4444], or the value of zeroDotZero
       otherwise.
          If tedLinkInformationSource has the value other(5) this
       object MAY contain the identifier of the corresponding row entry
       a local proprietary MIB module, or the value of zeroDotZero
       otherwise."
   ::= { tedEntry 5 }

   tedLinkState OBJECT-TYPE
       SYNTAX       INTEGER {

T. Otani et al.           Expires Oct. 2011                   [Page 10]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

                    unknown (0),
                    up (1),
                    down (2)
                    }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         " This object represents the actual operational state of this
   TE link. For instance, if a row is created in the tedTable, but the
   actual TE link is not available for some reason (e.g. when there is
   not yet physical link or manually disable), then the object would be
   down(2) state. In contrast, if a row is added and the TE link is
   available, this would be operationally up(1)."
   ::= { tedEntry 6 }

   tedLinkType OBJECT-TYPE
       SYNTAX       INTEGER {
                    pointToPoint (1),
                    multiAccess (2)
                    }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the type of the link such as point-to-point or
   multi-access."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.1"
   ::= { tedEntry 7 }

   tedRouterIdAddrType OBJECT-TYPE
       SYNTAX       InetAddressType
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         " This object indicates the TE-Router ID address type. Only
   values unknown(0), ipv4(1) or ipv6(2) must be supported. "
   ::= { tedEntry 8 }

   tedRouterIdAddr OBJECT-TYPE
       SYNTAX       InetAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
           "This object indicates the TE-Router ID."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.4.1"
   ::= { tedEntry 9 }

   tedLinkIdAddrType OBJECT-TYPE
       SYNTAX       InetAddressType
       MAX-ACCESS   read-only
       STATUS       current

T. Otani et al.           Expires Oct. 2011                   [Page 11]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

       DESCRIPTION
         " This object indicates the address type of the TE Link ID.
   Only values unknown(0), ipv4(1) or ipv6(2) must be supported."
   ::= { tedEntry 10 }

   tedLinkIdAddr OBJECT-TYPE
       SYNTAX       InetAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the Router ID of the neighbor in the case of
   point-to-point links.  This also indicates the interface address of
   the designated router in the case of multi-access links."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.2"
   ::= { tedEntry 11 }

   tedMetric OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the traffic engineering metric value of the TE
   link."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.5"
   ::= { tedEntry 12 }

   tedMaxBandwidth OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the maximum bandwidth that can be used on this
   link in this direction."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.6"
   ::= { tedEntry 13 }

   tedMaxReservableBandwidth OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the maximum bandwidth that may be reserved on
   this link in this direction."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.7"

T. Otani et al.           Expires Oct. 2011                   [Page 12]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

   ::= { tedEntry 14 }

   tedUnreservedBandwidthPri0 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the amount of bandwidth not yet reserved at the
   priority 0."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.8"
   ::= { tedEntry 15 }

   tedUnreservedBandwidthPri1 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the amount of bandwidth not yet reserved at the
   priority 1."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.8"
   ::= { tedEntry 16 }

   tedUnreservedBandwidthPri2 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the amount of bandwidth not yet reserved at the
   priority 2."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.8"
   ::= { tedEntry 17 }

   tedUnreservedBandwidthPri3 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the amount of bandwidth not yet reserved at the
   priority 3."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.8"
   ::= { tedEntry 18 }


T. Otani et al.           Expires Oct. 2011                   [Page 13]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

   tedUnreservedBandwidthPri4 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the amount of bandwidth not yet reserved at the
   priority 4."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.8"
   ::= { tedEntry 19 }

   tedUnreservedBandwidthPri5 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the amount of bandwidth not yet reserved at the
   priority 5."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.8"
   ::= { tedEntry 20 }

   tedUnreservedBandwidthPri6 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the amount of bandwidth not yet reserved at the
   priority 6."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.8"
   ::= { tedEntry 21 }

   tedUnreservedBandwidthPri7 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the amount of bandwidth not yet reserved at the
   priority 7."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.8"
   ::= { tedEntry 22 }

   tedAdministrativeGroup OBJECT-TYPE
       SYNTAX       Integer32

T. Otani et al.           Expires Oct. 2011                   [Page 14]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the Administrative Group which the link belong
   to.  Since the value is a bit mask, the link can belong to multiple
   groups.  This is also called Resource Class/Color."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.9"
   ::= { tedEntry 23 }

   tedLocalId OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the Link local identifier of an unnumbered
   link."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.1"
   ::= { tedEntry 24 }

   tedRemoteId OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This indicates the Link remote identifier of an unnumbered
   link."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.1"
   ::= { tedEntry 25 }

   tedLinkProtectionType OBJECT-TYPE
       SYNTAX       BITS {
                    extraTraffic(0),
                    unprotected(1),
                    shared (2),
                    dedicatedOneToOne (3),
                    dedicatedOnePlusOne(4),
                    enhanced(5)
                    }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the protection type of the TE link."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.2"
   ::= { tedEntry 26 }

   --
   --  TED Local Interface IP Address Table
   --


T. Otani et al.           Expires Oct. 2011                   [Page 15]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

   tedLocalIfAddrTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF TedLocalIfAddrEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This table contains the IP address information of a local TE
   link."
   ::= { tedObjects 2 }

   tedLocalIfAddrEntry OBJECT-TYPE
       SYNTAX       TedLocalIfAddrEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This entry contains the IP address information of the local TE
   link."
       INDEX { tedAreaId, tedRouterId, tedLinkStateId,
   tedLocalIfAddrIndex }
   ::= { tedLocalIfAddrTable 1 }

   TedLocalIfAddrEntry ::= SEQUENCE {
       tedLocalIfAddrIndex   Unsigned32,
       tedLocalIfAddrType    InetAddressType,
       tedLocalIfAddr        InetAddress
       }

   tedLocalIfAddrIndex OBJECT-TYPE
       SYNTAX       Unsigned32 (1..255)
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This indicates the index to identify multiple local TE links."
   ::= { tedLocalIfAddrEntry 1 }

   tedLocalIfAddrType OBJECT-TYPE
       SYNTAX       InetAddressType
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
        "This object indicates the address type of the local TE link.
   Only values unknown(0), ipv4(1) or ipv6(2) have to be supported."
   ::= { tedLocalIfAddrEntry 2 }

   tedLocalIfAddr OBJECT-TYPE
       SYNTAX       InetAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
        "This object indicates the address of the local TE link."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.3,
           Traffic Engineering Extensions to OSPF Version3, RFC5329,
   4.3"

T. Otani et al.           Expires Oct. 2011                   [Page 16]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

   ::= { tedLocalIfAddrEntry 3 }

   --
   --  TED Remote Interface IP Address Table
   --

   tedRemoteIfAddrTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF TedRemoteIfAddrEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This table contains the IP address information of a remote TE
   link."
   ::= { tedObjects 3 }

   tedRemoteIfAddrEntry OBJECT-TYPE
       SYNTAX       TedRemoteIfAddrEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This entry contains the IP address information of the remote
   TE link."
   INDEX { tedAreaId, tedRouterId, tedLinkStateId,
   tedRemoteIfAddrIndex }
       ::= { tedRemoteIfAddrTable 1 }

   TedRemoteIfAddrEntry ::= SEQUENCE {
       tedRemoteIfAddrIndex   Unsigned32,
       tedRemoteIfAddrType    InetAddressType,
       tedRemoteIfAddr        InetAddress
       }

   tedRemoteIfAddrIndex OBJECT-TYPE
       SYNTAX       Unsigned32 (1..255)
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This indicates the index to identify multiple remote TE
   links."
   ::= { tedRemoteIfAddrEntry 1 }

   tedRemoteIfAddrType OBJECT-TYPE
       SYNTAX       InetAddressType
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the address type of the remote TE link."
   ::= { tedRemoteIfAddrEntry 2 }

   tedRemoteIfAddr OBJECT-TYPE
       SYNTAX       InetAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION

T. Otani et al.           Expires Oct. 2011                   [Page 17]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

         "This object indicates the address of the remote TE link."
       REFERENCE
         " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
   3630, 2.5.4,
           Traffic Engineering Extensions to OSPF Version3, RFC5329,
   4.4"
   ::= { tedRemoteIfAddrEntry 3 }

   --
   --  TED Switching Capability Table
   --

   tedSwCapTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF TedSwCapEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This table contains the GMPLS TED switching capability
   information."
   ::= { tedObjects 4 }

   tedSwCapEntry OBJECT-TYPE
       SYNTAX       TedSwCapEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This entry relates each TE link with its GMPLS TE switching
   capability information. IF the MIB deals with only OSPF-TE
   information, the value of each object related with GMPLS TE
   extensions should be null."
       INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSwCapIndex }
   ::= { tedSwCapTable 1 }

   TedSwCapEntry ::= SEQUENCE {
       tedSwCapIndex                 Unsigned32,
       tedSwCapType         IANAGmplsSwitchingTypeTC,
       tedSwCapEncoding              IANAGmplsLSPEncodingTypeTC,
       tedSwCapMaxLspBandwidthPri0   Unsigned32,
       tedSwCapMaxLspBandwidthPri1   Unsigned32,
       tedSwCapMaxLspBandwidthPri2   Unsigned32,
       tedSwCapMaxLspBandwidthPri3   Unsigned32,
       tedSwCapMaxLspBandwidthPri4   Unsigned32,
       tedSwCapMaxLspBandwidthPri5   Unsigned32,
       tedSwCapMaxLspBandwidthPri6   Unsigned32,
       tedSwCapMaxLspBandwidthPri7   Unsigned32,
       tedSwCapMinLspBandwidth       Unsigned32,
       tedSwCapIfMtu                 Integer32,
       tedSwCapIndication            INTEGER
       }

   tedSwCapIndex OBJECT-TYPE
       SYNTAX       Unsigned32 (1..255)
       MAX-ACCESS   not-accessible
       STATUS       current

T. Otani et al.           Expires Oct. 2011                   [Page 18]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

       DESCRIPTION
         "This index is utilized to identify multiple switching
   functions on a local or remote TE link according to definitions of
   textual conventions of GMPLS [RFC4801]."
   ::= { tedSwCapEntry 1 }

   tedSwCapType OBJECT-TYPE
       SYNTAX       IANAGmplsSwitchingTypeTC
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the GMPLS switching capability assigned
   to the TE link according to definitions of textual conventions of
   GMPLS [RFC4801]."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 2 }

   tedSwCapEncoding OBJECT-TYPE
       SYNTAX       IANAGmplsLSPEncodingTypeTC
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the GMPLS encoding type assigned to the
   TE link."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 3 }

   tedSwCapMaxLspBandwidthPri0 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the maximum bandwidth of the TE link at
   the priority 0 for GMPLS LSP creation."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 4 }

   tedSwCapMaxLspBandwidthPri1 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the maximum bandwidth of the TE link at
   the priority 1 for GMPLS LSP creation."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 5 }

   tedSwCapMaxLspBandwidthPri2  OBJECT-TYPE

T. Otani et al.           Expires Oct. 2011                   [Page 19]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the maximum bandwidth of the TE link at
   the priority 2 for GMPLS LSP creation."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 6 }

   tedSwCapMaxLspBandwidthPri3 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the maximum bandwidth of the TE link at
   the priority 3 for GMPLS LSP creation."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 7 }

   tedSwCapMaxLspBandwidthPri4 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the maximum bandwidth of the TE link at
   the priority 4 for GMPLS LSP creation."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 8 }

   tedSwCapMaxLspBandwidthPri5  OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the maximum bandwidth of the TE link at
   the priority 5 for GMPLS LSP creation."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 9 }

   tedSwCapMaxLspBandwidthPri6 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION


T. Otani et al.           Expires Oct. 2011                   [Page 20]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

         "This object indicates the maximum bandwidth of the TE link at
   the priority 6 for GMPLS LSP creation."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 10 }

   tedSwCapMaxLspBandwidthPri7 OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the maximum bandwidth of the TE link at
   the priority 7 for GMPLS LSP creation."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 11 }

   tedSwCapMinLspBandwidth OBJECT-TYPE
       SYNTAX       Unsigned32 (0..4294967295)
       UNITS        "Byte per seconds"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the minimum bandwidth of the TE link for
   GMPLS LSP creation if the switching capability field is TDM, PSC-1,
   PSC-2, PSC-3, or PSC-4."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 12 }

   tedSwCapIfMtu OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates the MTU of the local or remote TE link."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 13 }

   tedSwCapIndication OBJECT-TYPE
       SYNTAX       INTEGER {
                    standard (0),
                    arbitrary (1)
                    }
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicates whether the interface supports Standard
   or Arbitrary SONET SDH."
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
   ::= { tedSwCapEntry 14 }

T. Otani et al.           Expires Oct. 2011                   [Page 21]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011


   --
   --  TED SRLG Table
   --

   tedSrlgTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF TedSrlgEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This table contains the SRLG information of the TE link."
   ::= { tedObjects 5 }

   tedSrlgEntry OBJECT-TYPE
       SYNTAX       TedSrlgEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This entry relates each TE link with its SRLG information."
       INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSrlgIndex }
   ::= { tedSrlgTable 1 }

   TedSrlgEntry ::= SEQUENCE {
       tedSrlgIndex   Unsigned32,
       tedSrlg        Integer32
       }

   tedSrlgIndex OBJECT-TYPE
       SYNTAX       Unsigned32(1..255)
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
         "This index is utilized to identify multiple SRLG values on a
   local or remote TE link."
   ::= { tedSrlgEntry 1 }

   tedSrlg OBJECT-TYPE
       SYNTAX       Integer32
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "This object indicate the SRLG value assigned to a local or
   remote TE link"
       REFERENCE
         " OSPF Extensions in Support of GMPLS, RFC 4203, 1.3"
   ::= { tedSrlgEntry 2 }

   --
   -- Notification Configuration
   --

   tedStatusChangeNotificationMaxRate OBJECT-TYPE
       SYNTAX        Unsigned32
       MAX-ACCESS    read-write

T. Otani et al.           Expires Oct. 2011                   [Page 22]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

       STATUS        current
       DESCRIPTION
         "A lot of notifications relating to the status change are
   expected to generate in a node, especially when a network failure
   occurs and might cause a performance degradation of the node itself.
   To avoid such a defect, this object provides the maximum number of
   notifications generated per minute.  If events occur more rapidly,
   the implementation may simply fail to emit these notifications during
   that period, or may queue them until an appropriate time. A value of
   0 means no throttling is applied and events may be notified at the
   rate at which they occur."
       DEFVAL        {0}
   ::= { tedObjects 6 }

   tedCreatedDeletedNotificationMaxRate OBJECT-TYPE
       SYNTAX        Unsigned32
       MAX-ACCESS    read-write
       STATUS        current
       DESCRIPTION
         "A lot of notifications relating to new registration in ted
   table by receiving new TE link information or deletion of existing
   entries in ted table are expected to generate in a node. This object
   provides the maximum number of notifications generated per minute. "
       DEFVAL        {0}
   ::= { tedObjects 7 }

   --
   -- Notifications
   --

   tedStatusChange NOTIFICATION-TYPE
       OBJECTS  {
         tedLinkInformationSource
         }
       STATUS   current
       DESCRIPTION
         "This notification signifies that there has been change in TE
   information of tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable,
   tedSwCapTable and/or tedSrlgTable. For example, this should be
   generated when tedUnreservedBandwidth is changed to create or delete
   LSP using registered TE link. "
   ::= { tedNotifications 1 }

   tedEntryCreated NOTIFICATION-TYPE
       OBJECTS  {
         tedLinkInformationSource
         }
       STATUS   current
       DESCRIPTION
         " This notification signifies that there has been new
   registration in ted table by receiving new TE link information. For
   example, this should be generated when new index (tedAreaId,
   tedRouterId and tedLinkStateId) is registered in TED table."
   ::= { tedNotifications 2 }

T. Otani et al.           Expires Oct. 2011                   [Page 23]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011


   tedEntryDeleted NOTIFICATION-TYPE
       OBJECTS  {
         tedLinkInformationSource
         }
       STATUS      current
       DESCRIPTION
         "This notification signifies that there has been deletion of an
   entry in the ted table. For example, this should be generated when
   one of existing entries is deleted in TED table."
   ::= { tedNotifications 3 }

   -- Conformance Statement

   tedCompliances
       OBJECT IDENTIFIER ::= { tedConformance 1 }
   tedGroups
       OBJECT IDENTIFIER ::= { tedConformance 2 }

   -- Module Compliance

   tedModuleFullCompliance MODULE-COMPLIANCE
       STATUS   current
       DESCRIPTION
         "Compliance statement for agents provides full support for the
   TED MIB."
       MODULE -- this module
       MANDATORY-GROUPS   { tedMainGroup,
                            tedObjectsGroup,
                            tedNotificationGroup
                          }

   GROUP tedUnnumberedLinkGroup
   DESCRIPTION
        "This group is mandatory for TE links that supports the
   unnumbered links."

   GROUP tedNumberedLinkGroup
        DESCRIPTION
        "This group is mandatory for TE links that supports the numbered
   links."

   GROUP tedSwCapGroup
   DESCRIPTION
        "This group is mandatory for TE links that supports GMPLS
   switching capability."

   GROUP tedSwCapMinLspBandwidthGroup
   DESCRIPTION
        "This group is mandatory for TE links if the switching
   capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."

   GROUP tedSwCapIfMtuGroup
   DESCRIPTION

T. Otani et al.           Expires Oct. 2011                   [Page 24]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

        "This group is mandatory for TE links that supports the MTU of
   the local or remote TE link."

   GROUP tedSwCapIndicationGroup
   DESCRIPTION
        "This group is mandatory for TE links that supports Standard or
   Arbitrary SONET/SDH."

   GROUP tedSrlgGroup
   DESCRIPTION
        "This group is mandatory for TE links that supports SRLG
   information."

   ::= { tedCompliances 1 }

   --
   -- ReadOnly Compliance
   --

   tedModuleReadOnlyCompliance MODULE-COMPLIANCE
       STATUS current
       DESCRIPTION
         "Compliance requirement for implementations only provide read-
   only support for TED. Such devices can then be monitored but cannot
   be configured using this MIB module."
       MODULE -- this module
       MANDATORY-GROUPS   { tedMainGroup
                          }

   GROUP tedUnnumberedLinkGroup
   DESCRIPTION
        "This group is mandatory for TE links that supports the
   unnumbered links."

   GROUP tedNumberedLinkGroup
        DESCRIPTION
        "This group is mandatory for TE links that supports the numbered
   links."

   GROUP tedSwCapGroup
   DESCRIPTION
        "This group is mandatory for TE links that supports some GMPLS
   switching capabilities."

   GROUP tedSwCapMinLspBandwidthGroup
   DESCRIPTION
        "This group is mandatory for TE links if the switching
   capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."

   GROUP tedSwCapIfMtuGroup
   DESCRIPTION
        "This group is mandatory for TE links that supports the MTU of
   the local or remote TE link."


T. Otani et al.           Expires Oct. 2011                   [Page 25]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

   GROUP tedSwCapIndicationGroup
   DESCRIPTION
        "This group is mandatory for TE links that supports Standard or
   Arbitrary SONET/SDH."

   GROUP tedSrlgGroup
   DESCRIPTION
        "This group is mandatory for TE links that supports SRLG
   information."

   ::= { tedCompliances 2 }

   -- Units of conformance

   tedMainGroup OBJECT-GROUP
       OBJECTS {
               tedLinkInformationSource     ,
               tedLinkState                 ,
               tedLinkType                  ,
               tedRouterIdAddrType          ,
               tedRouterIdAddr              ,
               tedLinkIdAddrType            ,
               tedLinkIdAddr                ,
               tedMetric                    ,
               tedMaxBandwidth              ,
               tedMaxReservableBandwidth    ,
               tedUnreservedBandwidthPri0   ,
               tedUnreservedBandwidthPri1   ,
               tedUnreservedBandwidthPri2   ,
               tedUnreservedBandwidthPri3   ,
               tedUnreservedBandwidthPri4   ,
               tedUnreservedBandwidthPri5   ,
               tedUnreservedBandwidthPri6   ,
               tedUnreservedBandwidthPri7   ,
               tedAdministrativeGroup       ,
               tedLinkProtectionType        ,
               tedLinkInformationData
               }
       STATUS   current
       DESCRIPTION
         "Collection of objects for TED management"
   ::= { tedGroups 1 }

   tedObjectsGroup OBJECT-GROUP
       OBJECTS {
            tedStatusChangeNotificationMaxRate,
            tedCreatedDeletedNotificationMaxRate
       }
       STATUS  current
       DESCRIPTION
         "This objects needed to implement notification."
   ::= { tedGroups 2 }

   tedNotificationGroup NOTIFICATION-GROUP

T. Otani et al.           Expires Oct. 2011                   [Page 26]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

       NOTIFICATIONS {
            tedStatusChange,
            tedEntryCreated,
            tedEntryDeleted
            }
       STATUS  current
       DESCRIPTION
         " This group is mandatory for those implementations that can
   implement the notifications contained in this group. "
   ::= { tedGroups 3 }

   tedUnnumberedLinkGroup OBJECT-GROUP
       OBJECTS {
            tedLocalId,
            tedRemoteId
       }
       STATUS  current
       DESCRIPTION
         "This objects needed to implement the unnumbered links."
   ::= { tedGroups 4 }

   tedNumberedLinkGroup OBJECT-GROUP
       OBJECTS {
            tedLocalIfAddrType,
            tedLocalIfAddr,
            tedRemoteIfAddrType,
            tedRemoteIfAddr
       }
       STATUS  current
       DESCRIPTION
         "This objects needed to implement the numbered links."
   ::= { tedGroups 5 }

   tedSwCapGroup OBJECT-GROUP
       OBJECTS {
            tedSwCapType,
            tedSwCapEncoding,
            tedSwCapMaxLspBandwidthPri0,
            tedSwCapMaxLspBandwidthPri1,
            tedSwCapMaxLspBandwidthPri2,
            tedSwCapMaxLspBandwidthPri3,
            tedSwCapMaxLspBandwidthPri4,
            tedSwCapMaxLspBandwidthPri5,
            tedSwCapMaxLspBandwidthPri6,
            tedSwCapMaxLspBandwidthPri7
       }
       STATUS  current
       DESCRIPTION
         "This objects needed to implement TE links with its GMPLS TE
   switching capability information."
   ::= { tedGroups 6 }

   tedSwCapMinLspBandwidthGroup OBJECT-GROUP
       OBJECTS {

T. Otani et al.           Expires Oct. 2011                   [Page 27]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

            tedSwCapMinLspBandwidth
       }
       STATUS  current
       DESCRIPTION
         "This objects needed to implement the minimum bandwidth of the
   TE link for GMPLS LSP creation."
   ::= { tedGroups 7 }

   tedSwCapIfMtuGroup OBJECT-GROUP
       OBJECTS {
            tedSwCapIfMtu
       }
       STATUS  current
       DESCRIPTION
         "This objects needed to implement the MTU information of the
   local or remote TE link."
   ::= { tedGroups 8 }

   tedSwCapIndicationGroup OBJECT-GROUP
       OBJECTS {
            tedSwCapIndication
       }
       STATUS  current
       DESCRIPTION
         "This objects needed to implement the indication whether the
   interface supports Standard or Arbitrary SONET/SDH."
   ::= { tedGroups 9 }

   tedSrlgGroup OBJECT-GROUP
       OBJECTS {
            tedSrlg
       }
       STATUS  current
       DESCRIPTION
         "This objects needed to implement multiple SRLG values with
   GMPLS TE information."
   ::= { tedGroups 10 }

   END


8. Security Consideration

   There is a number of management objects defined in this MIB module
   that has a MAX-ACCESS clause of read-write. Such objects may be
   considered sensitive or vulnerable in some network environments. The
   support for SET operations in a non-secure environment without proper
   protection can have a negative effect on network operations.

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over

T. Otani et al.           Expires Oct. 2011                   [Page 28]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:

   tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable
   and tedSrlgTable contain topology information for the MPLS/GMPLS
   network.  If an administrator does not want to reveal this
   information, then these tables should be considered
   sensitive/vulnerable.

   SNMP versions prior to SNMPv3 did not include adequate security. Even
   if the network itself is secure (for example by using IPsec), even
   then, there is no control as to who on the secure network is allowed
   to access and GET/SET (read/change/create/delete) the objects in this
   MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full supports for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principles (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.


9. IANA Considerations

   The following "IANA Considerations" subsection requests IANA for a
   new assignment under the transmission subtree. New assignments can
   only be made via a Standards Action as specified in [RFC5226].

9.1 IANA Considerations for TED-MIB

   The IANA is requested to assign {transmission XXX } to the TED-MIB
   module specified in this document.


10. References

10.1 Normative References

  [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels", BCP 14, RFC 2119, March 1997.

  [RFC2328] J. Moy, " OSPF version2 ", RFC2328, April 1998.

  [RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
             "Structure of Management Information Version 2 (SMIv2)",
             STD 58, RFC 2578, April 1999.


T. Otani et al.           Expires Oct. 2011                   [Page 29]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

  [RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
             "Textual Conventions for SMIv2", STD 58, RFC 2579, April
             1999.

  [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
             "Conformance Statements for SMIv2", STD 58, RFC 2580,
             April 1999.

  [RFC3291]  M. Daniele, B. Haberman, S. Routhier, J. Schoenwaelder,
             "Textual Conventions for Internet Network Addresses",
             RFC3291, May 2002.
  [RFC3630] D. Katz, et al, "Traffic Engineering (TE) Extensions to
             OSPF Version2", RFC3630, Sep. 2003.

  [RFC4203] K. Kompella, and Y. Rekhter, "OSPF Extensions in Support
             of Generalized Multi-Protocol Label Switching", RFC4203,
             Oct. 2005.

  [RFC4750] Dan Joyal, et al, "OSPF Version 2 Management Information
             Base", RFC4750, Dec. 2006.

  [RFC4801] T. Nadeau and A. Farrel, Ed., "Definitions of Textual
             Conventions for Generalized Multiprotocol Label Switching
             (GMPLS) Management", RFC4801, Feb. 2007.

  [RFC5329] K. Ishiguro, V. Manral, A. Davey, A.Lindem " Traffic
             Engineering Extensions to OSPF Version 3 ", RFC5329, Sep.
             2008.

  [RFC5340] R. Coltun, D. Ferguson, J. Moy, A.Lindem " OSPF for IPv6",
             RFC5340, July 2008.

  [RFC5643] Dan Joyal, et al, "Management Information Base for OSPFv3
             ", RFC5643, August 2009.

10.2 Informative References

  [RFC3410] J. Case, R. Mundy, D. pertain, B.Stewart, "Introduction
             and Applicability Statement for Internet Standard
             Management Framework", RFC 3410, Dec. 2002.

  [RFC3812] Srinivasan, C., Viswanathan, A., and T. Nadeau,
             "Multiprotocol Label Switching (MPLS) Traffic Engineering
             (TE) Management Information Base (MIB)", RFC 3812, June
             2004.

  [RFC3813] Srinivasan, C., Viswanathan, A., and T. Nadeau,
             "Multiprotocol Label Switching (MPLS) Label Switching
             (LSR) Router Management Information Base (MIB)", RFC 3813,
             June 2004.

  [RFC4202] K. Kompella, and Y. Rekhter, "Routing Extensions in
             Support of Generalized Multi-Protocol Label Switching",
             RFC4202, Oct. 2005.

T. Otani et al.           Expires Oct. 2011                   [Page 30]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011


  [RFC4220] M. Dubuc, T. D. Nadeu and J. Lang, " Traffic Engineering
             Link Management Information Base ", RFC4220, Dec. 2005.

  [RFC4444] J. Parker, et al, "Management Information Base for
             Intermediate System to Intermediate System (IS-IS)", RFC
             4444, April 2006.

  [RFC4802] T. D. Nadeu and A. Farrel, "Generalized Multiprotocol
             Label Switching (GMPLS) Traffic Engineering Management
             Information Base", RFC4802, Feb. 2007.

  [RFC4803] T. D. Nadeu and A. Farrel, "Generalized Multiprotocol
             Label Switching (GMPLS) Label Switching Router (LSR)
             Management Information Base", RFC4803, Feb., 2007.

  [RFC5305] H. Smit and T. Li, "IS-IS extensions for Traffic
             Engineering", RFC 5305, Oct. 2008.

  [RFC5307] K. Kompella, and Y. Rekhter, "IS-IS Extensions in Support
             of Generalized Multi-Protocol Label Switching (GMPLS)",
             RFC5307, Oct. 2008.

  [RFC5226] Narten, T. and H. Alvestrand., " Guidelines for Writing an
             IANA Considerations Section in RFCs" BCP 26, RFC 5226, May
             2008.

  [RFC5643] Dan Joyal, et al, "Management Information Base for OSPFv3
             ", RFC5643, August 2009.


11. Acknowledgment

   The authors wish to acknowledge and thank the following individuals
   for their valuable comments to this document: Ken Nagami, Shuichi
   Okamoto, Adrian Farrel and Diego Caviglia.


12. Authors' Addresses

   Tomohiro Otani
   KDDI Corporation
   KDDI Bldg,
   2-3-2, Nishishinjuku, Shinjuku-ku, Tokyo,
   163-8003, Japan
   Email:  tm-otani@kddi.com

   Masanori Miyazawa
   KDDI R&D Laboratories, Inc.
   2-1-15 Ohara Fujimino, Saitama,
   356-8502, Japan.
   Email:  ma-miyazawa@kddilabs.jp



T. Otani et al.           Expires Oct. 2011                   [Page 31]


               draft-ietf-ccamp-gmpls-ted-mib-08.txt          Apr. 2011

   Thomas D. Nadeau
   Email: tnadeau@lucidvision.com

   Kenji Kumaki
   KDDI Corporation
   Garden Air Tower
   Iidabashi, Chyoda-ku, Tokyo,
   102-8460, Japan
   Email:  ke-kumaki@kddi.com














































T. Otani et al.           Expires Oct. 2011                   [Page 32]