Applications Area Working Group M. Kerwin
Internet-Draft QUT
Updates: 1738 (if approved) November 25, 2016
Intended status: Standards Track
Expires: May 29, 2017
The file URI Scheme
draft-ietf-appsawg-file-scheme-14
Abstract
This document specifies the "file" Uniform Resource Identifier (URI)
scheme, replacing the definition in RFC 1738.
It defines a common syntax which is intended to interoperate across
the broad spectrum of existing usages. At the same time it notes
some other current practices around the use of file URIs.
Note to Readers (To be removed by the RFC Editor)
This draft should be discussed on the IETF Applications Area Working
Group discussion list <apps-discuss@ietf.org>.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on May 29, 2017.
Copyright Notice
Copyright (c) 2016 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
Kerwin Expires May 29, 2017 [Page 1]
Internet-Draft file-scheme November 2016
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Notational Conventions . . . . . . . . . . . . . . . . . 3
2. Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Operations Involving file URIs . . . . . . . . . . . . . . . 5
4. File System Name Encoding . . . . . . . . . . . . . . . . . . 5
5. Security Considerations . . . . . . . . . . . . . . . . . . . 5
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6
7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 7
8. References . . . . . . . . . . . . . . . . . . . . . . . . . 7
8.1. Normative References . . . . . . . . . . . . . . . . . . 7
8.2. Informative References . . . . . . . . . . . . . . . . . 8
Appendix A. Differences from Previous Specifications . . . . . . 9
Appendix B. Example URIs . . . . . . . . . . . . . . . . . . . . 9
Appendix C. Similar Technologies . . . . . . . . . . . . . . . . 10
Appendix D. System-Specific Operations . . . . . . . . . . . . . 10
D.1. POSIX Systems . . . . . . . . . . . . . . . . . . . . . . 10
D.2. DOS- and Windows-Like Systems . . . . . . . . . . . . . . 11
D.3. Mac OS X Systems . . . . . . . . . . . . . . . . . . . . 11
D.4. OpenVMS Files-11 Systems . . . . . . . . . . . . . . . . 11
Appendix E. Nonstandard Syntax Variations . . . . . . . . . . . 11
E.1. User Information . . . . . . . . . . . . . . . . . . . . 11
E.2. DOS and Windows Drive Letters . . . . . . . . . . . . . . 12
E.2.1. Relative Paths . . . . . . . . . . . . . . . . . . . 12
E.2.2. Vertical Line Character . . . . . . . . . . . . . . . 13
E.3. UNC Strings . . . . . . . . . . . . . . . . . . . . . . . 14
E.3.1. file URI with Authority . . . . . . . . . . . . . . . 14
E.3.2. file URI with UNC Path . . . . . . . . . . . . . . . 15
E.4. Backslash as Separator . . . . . . . . . . . . . . . . . 16
Appendix F. Collected Nonstandard Rules . . . . . . . . . . . . 16
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 18
1. Introduction
A file URI identifies an object (a "file") stored in a structured
object naming and accessing environment on a host (a "file system.")
The URI can be used in discussions about the file, and if other
conditions are met it can be dereferenced to directly access the
file.
Kerwin Expires May 29, 2017 [Page 2]
Internet-Draft file-scheme November 2016
This document specifies a syntax based on the generic syntax of
[RFC3986] that is compatible with most existing usages. Optional
extensions to the syntax which might be encountered in practice are
listed in appendices; these extensions are listed for informational
purposes only.
The file URI scheme is not coupled with a specific protocol, nor with
a specific media type [RFC6838]. See Section 3 for a discussion of
operations that can be performed on the object identified by a file
URI.
1.1. Notational Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119] when they
appear in all upper case. They may also appear in lower or mixed
case as English words, without normative meaning.
Throughout this document the term "local file" is used to describe
files that can be accessed through the local file system API using
only the information included in the file path, not relying on other
information (such as network addresses.) It is important to note
that a local file may not be physically located on the local machine,
for example if a networked file system is transparently mounted into
the local file system.
The term "local file URI" is used to describe file URIs which have no
"authority" component, or where the authority is the special string
"localhost" or a fully qualified domain name that resolves to the
machine from which the URI is being interpreted (Section 2).
2. Syntax
The file URI syntax is defined here in Augmented Backus-Naur Form
(ABNF) [RFC5234], importing the "host" and "path-absolute" rules from
[RFC3986] (as updated by [RFC6874].)
The generic syntax in [RFC3986] includes "path" and "authority"
components, for each of which only a subset is used in the definition
of the file URI scheme. The relevant subset of "path" is "path-
absolute", and the subset of "authority" is "file-auth", given below.
The syntax definition below is different from those given in
[RFC1630] and [RFC1738] as it is derived from the generic syntax of
[RFC3986], which post-dates the previous file URI specifications.
Appendix A enumerates significant differences.
Kerwin Expires May 29, 2017 [Page 3]
Internet-Draft file-scheme November 2016
file-URI = file-scheme ":" file-hier-part
file-scheme = "file"
file-hier-part = ( "//" auth-path )
/ local-path
auth-path = [ file-auth ] path-absolute
local-path = path-absolute
file-auth = "localhost"
/ host
The "host" is the fully qualified domain name of the system on which
the file is accessible. This allows a client on another system to
know that it cannot access the file system, or perhaps that it needs
to use some other local mechanism to access the file.
As a special case, the "file-auth" rule can match the string
"localhost" which is interpreted as "the machine from which the URI
is being interpreted," exactly as if no authority were present. Some
current usages of the scheme incorrectly interpret all values in the
authority of a file URI, including "localhost", as non-local. Yet
others interpret any value as local, even if the "host" does not
resolve to the local machine. To maximize compatibility with
previous specifications, users MAY choose to include an "auth-path"
with no "file-auth" when creating a URI.
The path component represents the absolute path to the file in the
file system. See Appendix D for some discussion of system-specific
concerns including absolute file paths and file system roots.
Some file systems have case-sensitive file naming and some do not.
As such the file URI scheme supports case sensitivity, in order to
retain the case as given. Any transport-related handling of the file
URI scheme MUST retain the case as given. Any mapping to or from a
case-insensitive form is solely the responsibility of the
implementation processing the file URI on behalf of the referenced
file system.
Also see Appendix E that lists some nonstandard syntax variations
that can be encountered in practice.
Kerwin Expires May 29, 2017 [Page 4]
Internet-Draft file-scheme November 2016
3. Operations Involving file URIs
See the POSIX file and directory operations [POSIX] for examples of
standardized operations that can be performed on files.
A file URI can be dependably dereferenced or translated to a local
file path only if it is local. A file URI is considered "local" if
it has no "file-auth", or the "file-auth" is the special string
"localhost" or a fully qualified domain name that resolves to the
machine from which the URI is being interpreted (Section 2).
This specification neither defines nor forbids any set of operations
that might be performed on a file identified by a non-local file URI.
4. File System Name Encoding
File systems use various encoding schemes to store file and directory
names. Many modern file systems store file and directory names as
arbitrary sequences of octets, in which case the representation as an
encoded string often depends on the user's localization settings, or
defaults to UTF-8 [STD63].
When a file URI is produced that represents textual data consisting
of characters from the Unicode Standard coded character set
[UNICODE], the data SHOULD be encoded as octets according to the
UTF-8 character encoding scheme [STD63] before percent-encoding is
applied; as per [RFC3986], Section 2.5.
A decision not to use percent-encoded UTF-8 is outside the scope of
this specification. It will typically require the use of heuristics
or explicit knowledge about the way the string will be processed.
5. Security Considerations
There are many security considerations for URI schemes discussed in
[RFC3986].
File access and the granting of privileges for specific operations
are complex topics, and the use of file URIs can complicate the
security model in effect for file privileges.
Historically, user agents have granted content from the file URI
scheme a tremendous amount of privilege. However, granting all local
files such wide privileges can lead to privilege escalation attacks.
Some user agents have had success granting local files directory-
based privileges, but this approach has not been widely adopted.
Other user agents use globally unique identifiers as the origin for
each file URI [RFC6454], which is the most secure option.
Kerwin Expires May 29, 2017 [Page 5]
Internet-Draft file-scheme November 2016
File systems typically assign an operational meaning to special
characters, such as the "/", "\", ":", "[", and "]" characters, and
to special device names like ".", "..", "...", "aux", "lpt", etc. In
some cases, merely testing for the existence of such a name will
cause the operating system to pause or invoke unrelated system calls,
leading to significant security concerns regarding denial of service
and unintended data transfer. It would be impossible for this
specification to list all such significant characters and device
names. Implementers MUST research the reserved names and characters
for the types of storage device that may be attached to their
application and restrict the use of data obtained from URI components
accordingly.
File systems vary in the way they handle case. Care MUST be taken to
avoid issues resulting from possibly unexpected aliasing from case-
only differences between file paths or URIs, or from mismatched
encodings or Unicode equivalences [UAX15] (see Section 4).
6. IANA Considerations
This document defines the following URI scheme, so the "Permanent URI
Schemes" registry has been updated accordingly. This registration
complies with [BCP35].
Scheme name:
file
Status:
permanent
Applications/protocols that use this scheme name:
Commonly used in hypertext documents to refer to files without
depending on network access. Supported by major browsers.
Windows API (PathCreateFromUrl, UrlCreateFromPath).
Perl LWP.
Contact:
Matthew Kerwin <matthew.kerwin@qut.edu.au>
Change Controller:
This scheme is registered under the IETF tree. As such, the IETF
maintains change control.
References:
See Section 8 of this document.
Kerwin Expires May 29, 2017 [Page 6]
Internet-Draft file-scheme November 2016
7. Acknowledgements
This specification is derived from [RFC1738], [RFC3986], and
[I-D.hoffman-file-uri] (expired); the acknowledgements in those
documents still apply.
Additional thanks to Dave Risney, author of the informative IE Blog
article <http://blogs.msdn.com/b/ie/archive/2006/12/06/file-uris-in-
windows.aspx>, and Dave Thaler for their early comments and
suggestions.
8. References
8.1. Normative References
[BCP35] Thaler, D., Ed., Hansen, T., and T. Hardie, "Guidelines
and Registration Procedures for URI Schemes", BCP 35,
RFC 7595, DOI 10.17487/RFC7595, June 2015,
<http://www.rfc-editor.org/info/bcp35>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<http://www.rfc-editor.org/info/rfc2119>.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, DOI 10.17487/RFC3986, January 2005,
<http://www.rfc-editor.org/info/rfc3986>.
[RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC5234, January 2008,
<http://www.rfc-editor.org/info/rfc5234>.
[RFC6874] Carpenter, B., Cheshire, S., and R. Hinden, "Representing
IPv6 Zone Identifiers in Address Literals and Uniform
Resource Identifiers", RFC 6874, DOI 10.17487/RFC6874,
February 2013, <http://www.rfc-editor.org/info/rfc6874>.
[STD63] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
2003, <http://www.rfc-editor.org/info/std63>.
[UAX15] Davis, M., Ed. and K. Whistler, Ed., "Unicode Standard
Annex #15: Unicode Normalization Forms", February 2016,
<http://www.unicode.org/reports/tr15/tr15-44.html>.
Kerwin Expires May 29, 2017 [Page 7]
Internet-Draft file-scheme November 2016
[UNICODE] The Unicode Consortium, "The Unicode Standard, Version
9.0.0", ISBN 978-1-936213-13-9, June 2016,
<http://www.unicode.org/versions/Unicode9.0.0/>.
8.2. Informative References
[Bash-Tilde]
Free Software Foundation, Inc, "Bash Reference Manual:
Tilde Expansion", February 2014,
<http://www.gnu.org/software/bash/manual/html_node/
Tilde-Expansion.html>.
[Bug107540]
Bugzilla@Mozilla, "Bug 107540", October 2007,
<https://bugzilla.mozilla.org/show_bug.cgi?id=107540>.
[I-D.hoffman-file-uri]
Hoffman, P., "The file URI Scheme", draft-hoffman-file-
uri-03 (work in progress), January 2005.
[MS-DTYP] Microsoft Open Specifications, "Windows Data Types, 2.2.57
UNC", October 2015,
<http://msdn.microsoft.com/en-us/library/gg465305.aspx>.
[POSIX] IEEE, "IEEE Std 1003.1, 2013 Edition", 2013.
[RFC1630] Berners-Lee, T., "Universal Resource Identifiers in WWW: A
Unifying Syntax for the Expression of Names and Addresses
of Objects on the Network as used in the World-Wide Web",
RFC 1630, DOI 10.17487/RFC1630, June 1994,
<http://www.rfc-editor.org/info/rfc1630>.
[RFC1738] Berners-Lee, T., Masinter, L., and M. McCahill, "Uniform
Resource Locators (URL)", RFC 1738, DOI 10.17487/RFC1738,
December 1994, <http://www.rfc-editor.org/info/rfc1738>.
[RFC2396] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifiers (URI): Generic Syntax", RFC 2396,
DOI 10.17487/RFC2396, August 1998,
<http://www.rfc-editor.org/info/rfc2396>.
[RFC6454] Barth, A., "The Web Origin Concept", RFC 6454,
DOI 10.17487/RFC6454, December 2011,
<http://www.rfc-editor.org/info/rfc6454>.
Kerwin Expires May 29, 2017 [Page 8]
Internet-Draft file-scheme November 2016
[RFC6838] Freed, N., Klensin, J., and T. Hansen, "Media Type
Specifications and Registration Procedures", BCP 13,
RFC 6838, DOI 10.17487/RFC6838, January 2013,
<http://www.rfc-editor.org/info/rfc6838>.
[WHATWG-URL]
WHATWG, "URL Living Standard", May 2013,
<http://url.spec.whatwg.org/>.
[Win32-Namespaces]
Microsoft Developer Network, "Naming Files, Paths, and
Namespaces", June 2013, <https://msdn.microsoft.com/en-
us/library/windows/desktop/aa365247(v=vs.85).aspx>.
[Zsh-Tilde]
"zsh: 14.7 Filename Expansion", December 2015,
<http://zsh.sourceforge.net/Doc/Release/
Expansion.html#Filename-Expansion>.
Appendix A. Differences from Previous Specifications
The syntax definition in Section 2 inherits incremental differences
from the general syntax of [RFC1738] made by [RFC2396] ([RFC2396],
Appendix G) and [RFC3986] ([RFC3986], Appendix D).
According to the definition in [RFC1738] a file URL always started
with the token "file://", followed by an (optionally blank) host name
and a "/". The syntax given in Section 2 makes the entire authority
component, including the double slashes "//", optional.
Appendix B. Example URIs
The syntax in Section 2 is intended to support file URIs that take
the following forms:
Local files:
o A traditional file URI for a local file, with an empty authority.
This is the most common format in use today. E.g.:
* "file:///path/to/file"
o The minimal representation of a local file, with no authority
field and an absolute path that begins with a slash "/". E.g.:
* "file:/path/to/file"
Non-local files:
Kerwin Expires May 29, 2017 [Page 9]
Internet-Draft file-scheme November 2016
o A non-local file, with an explicit authority. E.g.:
* "file://host.example.com/path/to/file"
Appendix C. Similar Technologies
o The WHATWG defines a living URL standard [WHATWG-URL], which
includes algorithms for interpreting file URIs (as URLs).
o The Universal Naming Convention (UNC) [MS-DTYP] defines a string
format that can perform a similar role to the file URI scheme in
describing the location of files, except that files located by UNC
filespace selector strings are typically stored on a remote
machine and accessed using a network protocol. Appendix E.3 lists
some ways in which UNC filespace selector strings are currently
made to interoperate with the file URI scheme.
o The Microsoft Windows API defines Win32 Namespaces
[Win32-Namespaces] for interacting with files and devices using
Windows API functions. These namespaced paths are prefixed by
"\\?\" for Win32 File Namespaces and "\\.\" for Win32 Device
Namespaces. There is also a special case for UNC file paths in
Win32 File Namespaces, referred to as "Long UNC", using the prefix
"\\?\UNC\". This specification does not define a mechanism for
translating namespaced paths to or from file URIs.
Appendix D. System-Specific Operations
This appendix is not normative; it highlights some observed
behaviours and provides system-specific guidance for interacting with
file URIs and paths.
D.1. POSIX Systems
In a POSIX file system the root of the file system is represented as
a directory with a zero-length name, usually written as "/"; the
presence of this root in a file URI can be taken as given by the
initial slash in the "path-absolute" rule.
Common UNIX shells such as the Bourne-Again SHell (bash) and Z Shell
(zsh) provide a function known as "tilde expansion" [Bash-Tilde] or
"filename expansion" [Zsh-Tilde], where a path that begins with a
tilde character "~" can be expanded out to a special directory name.
No such facility exists using the file URI scheme; a tilde in a file
URI is always just a tilde.
Kerwin Expires May 29, 2017 [Page 10]
Internet-Draft file-scheme November 2016
D.2. DOS- and Windows-Like Systems
When mapping a DOS- or Windows-like file path to a file URI, the
drive letter (e.g. "c:") is typically mapped into the first path
segment.
Appendix E lists some nonstandard techniques for interacting with
DOS- or Windows-like file paths and URIs.
D.3. Mac OS X Systems
The HFS+ file system uses a nonstandard normalization form, similar
to Normalization Form D [UAX15]. Take care when transforming HFS+
file paths to and from URIs (Section 4).
D.4. OpenVMS Files-11 Systems
When mapping a VMS file path to a file URI, the device name is mapped
into the first path segment. Note that the dollars sign "$" is a
reserved character per the definition in [RFC3986], Section 2.2, so
should be percent-encoded if present in the device name.
If the VMS file path includes a node reference, that reference is
used as the authority. Where the original node reference includes a
user name and password in an access control string, they can be
transcribed into the authority using the nonstandard syntax extension
in Appendix E.1.
Appendix E. Nonstandard Syntax Variations
These variations may be encountered by existing usages of the file
URI scheme, but are not supported by the normative syntax of
Section 2.
This appendix is not normative.
E.1. User Information
It might be necessary to include user information such as a user name
in a file URI, for example when mapping a VMS file path with a node
reference that includes an access control string.
To allow user information to be included in a file URI, the "file-
auth" rule in Section 2 can be replaced with the following:
file-auth = "localhost"
/ [ userinfo "@" ] host
Kerwin Expires May 29, 2017 [Page 11]
Internet-Draft file-scheme November 2016
This uses the "userinfo" rule from [RFC3986].
As discussed in the HP OpenVMS Systems Documentation
<http://h71000.www7.hp.com/doc/84final/ba554_90015/ch03s09.html>
"access control strings include sufficient information to allow
someone to break in to the remote account, [therefore] they create
serious security exposure." In a similar vein, the presence of a
password in a "user:password" userinfo field is deprecated by
[RFC3986]. Take care when dealing with information that can be used
to identify a user or grant access to a system.
E.2. DOS and Windows Drive Letters
On Windows- or DOS-like file systems an absolute file path can begin
with a drive letter. To facilitate this, the "local-path" rule in
Section 2 can be replaced with the following:
local-path = [ drive-letter ] path-absolute
drive-letter = ALPHA ":"
The "ALPHA" rule is defined in [RFC5234].
This is intended to support the minimal representation of a local
file in a DOS- or Windows-like environment, with no authority field
and an absolute path that begins with a drive letter. E.g.:
o "file:c:/path/to/file"
URIs of the form "file:///c:/path/to/file" are already supported by
the "path-absolute" rule.
Note that comparison of drive letters in DOS or Windows file paths is
case-insensitive. In some usages of file URIs drive letters are
canonicalized by converting them to uppercase, and others usages
treat URIs that differ only in the case of the drive letter as
identical.
E.2.1. Relative Paths
To mimic the behaviour of DOS- or Windows-like file systems, relative
paths beginning with a slash "/" can be resolved relative to the
drive letter, when present, and resolution of ".." dot segments (per
Section 5.2.4 of [RFC3986]) can be modified to not ever overwrite the
drive letter.
For example:
Kerwin Expires May 29, 2017 [Page 12]
Internet-Draft file-scheme November 2016
base: file:///c:/path/to/file.txt
rel. URI: /some/other/thing.bmp
resolved: file:///c:/some/other/thing.bmp
base: file:///c:/foo.txt
rel. URI: ../../bar.txt
resolved: file:///c:/bar.txt
Relative paths with a drive letter followed by a character other than
a slash (e.g. "c:bar/baz.txt" or "c:../foo.txt") might not be
accepted as dereferenceable URIs in DOS- or Windows-like systems.
E.2.2. Vertical Line Character
Historically some usages of file URIs have included a vertical line
character "|" instead of a colon ":" in the drive letter construct.
[RFC3986] forbids the use of the vertical line, however it may be
necessary to interpret or update old URIs.
For interpreting such URIs, the "auth-path" and "local-path" rules in
Section 2 and the "drive-letter" rule above can be replaced with the
following:
auth-path = [ file-auth ] path-absolute
/ [ file-auth ] file-absolute
local-path = [ drive-letter ] path-absolute
/ file-absolute
file-absolute = "/" drive-letter path-absolute
drive-letter = ALPHA ":"
/ ALPHA "|"
This is intended to support regular DOS or Windows file URIs with
vertical line characters in the drive letter construct. E.g.:
o "file:///c|/path/to/file"
o "file:/c|/path/to/file"
o "file:c|/path/to/file"
To update such an old URI, replace the vertical line "|" with a colon
":".
Kerwin Expires May 29, 2017 [Page 13]
Internet-Draft file-scheme November 2016
E.3. UNC Strings
Some usages of the file URI scheme allow UNC filespace selector
strings [MS-DTYP] to be translated to and from file URIs, either by
mapping the equivalent segments of the two schemes (hostname to
authority, sharename+objectnames to path), or by mapping the entire
UNC string to the path segment of a URI.
E.3.1. file URI with Authority
The following is an algorithmic description of the process of
translating a UNC filespace selector string to a file URI by mapping
the equivalent segments of the two schemes:
1. Initialize the URI with the "file:" scheme identifier.
2. Append the authority:
1. Append the "//" authority sigil to the URI.
2. Append the host-name field of the UNC string to the URI.
3. Append the share-name:
1. Transform the share-name to a path segment ([RFC3986],
Section 3.3) to conform to the encoding rules of Section 2 of
[RFC3986].
2. Append a delimiting slash character "/" and the transformed
segment to the URI.
4. For each object-name:
1. Transform the objectname to a path segment as above.
The colon character ":" is allowed as a delimiter before
stream-name and stream-type in the file-name, if present.
2. Append a delimiting slash character "/" and the transformed
segment to the URI.
For example:
UNC String: \\host.example.com\Share\path\to\file.txt
URI: file://host.example.com/Share/path/to/file.txt
The inverse algorithm, for translating a file URI to a UNC filespace
selector string, is left as an exercise for the reader.
Kerwin Expires May 29, 2017 [Page 14]
Internet-Draft file-scheme November 2016
E.3.2. file URI with UNC Path
It is common to encounter file URIs that encode entire UNC strings in
the path, usually with all backslash "\" characters replaced with
slashes "/".
To interpret such URIs, the "auth-path" rule in Section 2 can be
replaced with the following:
auth-path = [ file-auth ] path-absolute
/ unc-authority path-absolute
unc-authority = 2*3"/" file-host
file-host = inline-IP / IPv4address / reg-name
inline-IP = "%5B" ( IPv6address / IPvFuture ) "%5D"
This syntax uses the "IPv4address", "IPv6address", "IPvFuture", and
"reg-name" rules from [RFC3986].
Note that the "file-host" rule is the same as "host" but with
percent-encoding applied to "[" and "]" characters.
This extended syntax is intended to support URIs that take the
following forms, in addition to those in Appendix B:
Non-local files:
o The representation of a non-local file, with an empty authority
and a complete (transformed) UNC string in the path. E.g.:
* "file:////host.example.com/path/to/file"
o As above, with an extra slash between the empty authority and the
transformed UNC string, as per the syntax defined in [RFC1738].
E.g.:
* "file://///host.example.com/path/to/file"
This representation is notably used by the Firefox web browser.
See Bugzilla#107540 [Bug107540].
It also further limits the definition of a "local file URI" by
excluding any file URI with a path that encodes a UNC string.
Kerwin Expires May 29, 2017 [Page 15]
Internet-Draft file-scheme November 2016
E.4. Backslash as Separator
Historically some usages have copied entire file paths into the path
components of file URIs. Where DOS or Windows file paths were thus
copied the resulting URI strings contained unencoded backslash "\"
characters, which are forbidden by both [RFC1738] and [RFC3986].
It may be possible to translate or update such an invalid file URI by
replacing all backslashes "\" with slashes "/", if it can be
determined with reasonable certainty that the backslashes are
intended as path separators.
Appendix F. Collected Nonstandard Rules
Here are the collected syntax rules for all optional appendices,
presented for convenience. This collected syntax is not normative.
file-URI = file-scheme ":" file-hier-part
file-scheme = "file"
file-hier-part = ( "//" auth-path )
/ local-path
auth-path = [ file-auth ] path-absolute
/ [ file-auth ] file-absolute
/ unc-authority path-absolute
local-path = [ drive-letter ] path-absolute
/ file-absolute
file-auth = "localhost"
/ [ userinfo "@" ] host
unc-authority = 2*3"/" file-host
file-host = inline-IP / IPv4address / reg-name
inline-IP = "%5B" ( IPv6address / IPvFuture ) "%5D"
file-absolute = "/" drive-letter path-absolute
drive-letter = ALPHA ":"
/ ALPHA "|"
This collected syntax is intended to support file URIs that take the
following forms:
Kerwin Expires May 29, 2017 [Page 16]
Internet-Draft file-scheme November 2016
Local files:
o A traditional file URI for a local file, with an empty authority.
E.g.:
* "file:///path/to/file"
o The minimal representation of a local file, with no authority
field and an absolute path that begins with a slash "/". E.g.:
* "file:/path/to/file"
o The minimal representation of a local file in a DOS- or Windows-
based environment, with no authority field and an absolute path
that begins with a drive letter. E.g.:
* "file:c:/path/to/file"
o Regular DOS or Windows file URIs, with vertical line characters in
the drive letter construct. E.g.:
* "file:///c|/path/to/file"
* "file:/c|/path/to/file"
* "file:c|/path/to/file"
Non-local files:
o The representation of a non-local file, with an explicit
authority. E.g.:
* "file://host.example.com/path/to/file"
o The "traditional" representation of a non-local file, with an
empty authority and a complete (transformed) UNC string in the
path. E.g.:
* "file:////host.example.com/path/to/file"
o As above, with an extra slash between the empty authority and the
transformed UNC string. E.g.:
* "file://///host.example.com/path/to/file"
Kerwin Expires May 29, 2017 [Page 17]
Internet-Draft file-scheme November 2016
Author's Address
Matthew Kerwin
Queensland University of Technology
Victoria Park Road
Kelvin Grove, QLD 4059
Australia
Email: matthew.kerwin@qut.edu.au
Kerwin Expires May 29, 2017 [Page 18]