Network Working Group                                           J. Gould
Internet-Draft                                                    L. Jia
Intended status: Standards Track                          VeriSign, Inc.
Expires: April 25, 2019                                        R. Carney
                                                               J. Kolker
                                                            GoDaddy Inc.
                                                        October 22, 2018


    Registry Mapping for the Extensible Provisioning Protocol (EPP)
                 draft-gould-carney-regext-registry-04

Abstract

   This document describes an Extensible Provisioning Protocol (EPP)
   mapping for provisioning registry zones (e.g. top-level domains) in a
   Domain Name Registry.  The attributes of a registry zone include the
   features and policies of the registry zone.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on April 25, 2019.

Copyright Notice

   Copyright (c) 2018 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of



Gould, et al.            Expires April 25, 2019                 [Page 1]


Internet-Draft                  registry                    October 2018


   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Conventions Used in This Document . . . . . . . . . . . .   3
   2.  Object Attributes . . . . . . . . . . . . . . . . . . . . . .   4
     2.1.  Zone Name . . . . . . . . . . . . . . . . . . . . . . . .   4
     2.2.  Dates and Times . . . . . . . . . . . . . . . . . . . . .   4
     2.3.  Schedule  . . . . . . . . . . . . . . . . . . . . . . . .   4
     2.4.  Regular Expressions . . . . . . . . . . . . . . . . . . .   5
     2.5.  Zone Object . . . . . . . . . . . . . . . . . . . . . . .   6
   3.  EPP Command Mapping . . . . . . . . . . . . . . . . . . . . .  27
     3.1.  EPP Query Commands  . . . . . . . . . . . . . . . . . . .  27
       3.1.1.  EPP <check> Command . . . . . . . . . . . . . . . . .  27
       3.1.2.  EPP <info> Command  . . . . . . . . . . . . . . . . .  29
       3.1.3.  EPP <transfer> Query Command  . . . . . . . . . . . .  35
     3.2.  EPP Transform Commands  . . . . . . . . . . . . . . . . .  35
       3.2.1.  EPP <create> Command  . . . . . . . . . . . . . . . .  36
       3.2.2.  EPP <delete> Command  . . . . . . . . . . . . . . . .  37
       3.2.3.  EPP <renew> Command . . . . . . . . . . . . . . . . .  38
       3.2.4.  EPP <transfer> Command  . . . . . . . . . . . . . . .  38
       3.2.5.  EPP <update> Command  . . . . . . . . . . . . . . . .  39
   4.  Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . .  40
     4.1.  Registry Mapping Schema . . . . . . . . . . . . . . . . .  40
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  64
     5.1.  XML Namespace . . . . . . . . . . . . . . . . . . . . . .  64
     5.2.  EPP Extension Registry  . . . . . . . . . . . . . . . . .  64
   6.  Implementation Status . . . . . . . . . . . . . . . . . . . .  64
     6.1.  Verisign EPP SDK  . . . . . . . . . . . . . . . . . . . .  65
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .  65
   8.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  66
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  66
     9.1.  Normative References  . . . . . . . . . . . . . . . . . .  66
     9.2.  Informative References  . . . . . . . . . . . . . . . . .  67
     9.3.  URIs  . . . . . . . . . . . . . . . . . . . . . . . . . .  67
   Appendix A.  Change History . . . . . . . . . . . . . . . . . . .  67
     A.1.  Change from 00 to 01  . . . . . . . . . . . . . . . . . .  67
     A.2.  Change from 01 to 02  . . . . . . . . . . . . . . . . . .  68
     A.3.  Change from 02 to 03  . . . . . . . . . . . . . . . . . .  68
     A.4.  Change from 03 to 04  . . . . . . . . . . . . . . . . . .  68
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  70








Gould, et al.            Expires April 25, 2019                 [Page 2]


Internet-Draft                  registry                    October 2018


1.  Introduction

   This document describes an extension mapping for version 1.0 of the
   Extensible Provisioning Protocol (EPP) [RFC5730].  This document
   describes a Domain Name Registry Mapping, referred to as Registry
   Mapping, for the Extensible Provisioning Protocol (EPP) [RFC5730].  A
   Domain Name Registry can service one or more registry zones (e.g.
   top-level domains) with a variety of supported services and policies.
   A registry zone, also referred to as a "zone" in this document, is a
   domain name that the Domain Name Registry supports provisioning
   operations to manage.  The registry zone and the associated DNS zone
   has an overlapping data set, where the registry zone is the source
   for the generation of a DNS zone.  A registry zone is typically a
   top-level domain name, but it can be a domain name at any domain name
   level.  A registry zone can be the source for multiple resolution
   services like DNS and WHOIS.

   This mapping enables the provisioning of the features and policies of
   the registry zones in the Domain Name Registry.  A Domain Name
   Registry MAY support a subset of all of the commands defined in this
   mapping and can authorize different clients to execute specific
   commands.  For example, all clients may be capable of executing the
   EPP Query Commands (Section 3.1), while internal clients or pre-
   defined external clients may be capable of executing the EPP
   Transform Commands (Section 3.2) for a specific set of zones.  It is
   up to server policy what commands are supported and to define the
   clients that are authorized to execute the commands for the registry
   zones.  The server MUST return a 2101 error response for an
   unimplemented command and MUST return a 2201 error response for an
   unauthorized command.  The server policy can be defined out-of-band
   or in a seperate EPP extension.

1.1.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

   XML is case sensitive.  Unless stated otherwise, XML specifications
   and examples provided in this document MUST be interpreted in the
   character case presented in order to develop a conforming
   implementation.

   In examples, "C:" represents lines sent by a protocol client and "S:"
   represents lines returned by a protocol server.  Indentation and
   white space in examples are provided only to illustrate element
   relationships and are not a REQUIRED feature of this protocol.




Gould, et al.            Expires April 25, 2019                 [Page 3]


Internet-Draft                  registry                    October 2018


   The XML namespace prefix "registry" is used for the namespace
   "urn:ietf:params:xml:ns:epp:registry-0.2", but implementations MUST
   NOT depend on it and instead employ a proper namespace-aware XML
   parser and serializer to interpret and output the XML documents.

2.  Object Attributes

   An EPP registry object has attributes and associated values that may
   be viewed and modified by the sponsoring client or the server.  This
   section describes each attribute type in detail.  The formal syntax
   for the attribute values described here can be found in the "Formal
   Syntax" section of this document and in the appropriate normative
   references.

2.1.  Zone Name

   The zone name is an element that includes an OPTIONAL "form"
   attribute that defines the form of the zone name as either "aLabel"
   or "uLabel", with the default value of "aLabel".  The "aLabel" form
   of a zone name contains all ASCII name labels that conform to
   [RFC0952] and [RFC1123].  The "uLabel" form of a zone name that
   includes one or more non-ASCII name labels that can be represented as
   ASCII labels using [RFC5890].

   At the time of this writing, [RFC5890] describes a standard to use
   certain ASCII name labels to represent non-ASCII name labels.  These
   conformance requirements might change in the future as a result of
   progressing work in developing standards for internationalized names.

2.2.  Dates and Times

   Date and time attribute values MUST be represented in Universal
   Coordinated Time (UTC) using the Gregorian calendar.  The extended
   date-time form using upper case "T" and "Z" characters defined in XML
   Schema Part 2 [1] MUST be used to represent date-time values, as XML
   Schema does not support truncated date-time forms or lower case "T"
   and "Z" characters.

2.3.  Schedule

   A schedule is defined using the <registry:schedule> element, with the
   required "frequency" attribute that defines the frequency of
   execution.  The "frequency" attribute has the possible values of
   "daily", "weekly", and "monthy".  The time zone is defined using the
   XML schema "time" type conventions of UTC and offsets from UTC, or
   using the OPTIONAL "tz" attribute that defines the named time zone.
   For example, the named Eastern time zone can be specified using the
   setting "tz=EST5EDT".



Gould, et al.            Expires April 25, 2019                 [Page 4]


Internet-Draft                  registry                    October 2018


   When the "frequency" attribute is set to "weekly", the "dayOfWeek"
   attribute MUST be set with a value between 0 (Sunday) to 6
   (Saturday), to define the day of week of execution.

   When the "frequency" attribute is set to "monthy", the "dayOfMonth"
   attribute MUST be set with a value between 1 and 31, to define the
   day of month of execution.  Execution will not occur in the current
   month if the "dayOfMonth" value is out-of-range for the current month
   (e.g, 29 - 31).

   The following are examples of different <registry:schedule> element
   definitions:

   Example daily schedule at 2 PM in the Eastern time zone:

   <registry:schedule frequency="daily" tz="EST5EDT">
     14:00:00
   </registry:schedule>

   Example daily schedule at 5 PM EST (5 UTC offset):

   <registry:schedule frequency="daily">
     07:00:00-05:00
   </registry:schedule>

   Example weekly schedule at midnight UTC on Sunday:

   <registry:schedule frequency="weekly" dayOfWeek="0">
     00:00:00Z
   </registry:schedule>

   Example monthly schedule at 5 PM UTC on the 15th of the month:

   <registry:schedule frequency="monthly" dayOfMonth="15">
     17:00:00Z
   </registry:schedule>

2.4.  Regular Expressions

   A regular expression element contains a <registry:expression> child
   element that defines the regular expression to apply with an OPTIONAL
   <registry:description> child element that describes the regular
   expression with an OPTIONAL "lang" attribute that defines the
   language of the description, with a default value of "en" (English).
   The <registry:expression> element MUST conform to the Perl-compatible
   Regular Expression (PCRE) [pcre] syntax.  Programming languages
   support different sets of PCRE features, so the server SHOULD define




Gould, et al.            Expires April 25, 2019                 [Page 5]


Internet-Draft                  registry                    October 2018


   a PCRE that leverages features that are supported by a broad set of
   client programming languages.

2.5.  Zone Object

   The Zone object, represented by the <registry:zone> element, is the
   primary object managed by this mapping.  The Zone object can apply to
   any zone level (top level, second level, third level, etc.).  The
   <registry:zone> element contains the following child elements:

   <registry:name>:  The zone name that can be at any level (top level,
       second level, third level, etc.), as described in Section 2.1.
   <registry:group>:  An OPTIONAL server defined grouping of zones where
       the zones belong to the same deployable unit.
   <registry:services>:  The OPTIONAL EPP namespace URIs of the objects
       and object extensions supported by the server based on [RFC5730].
       The <registry:services> element contains the following child
       elements:


       <registry:objURI>:  One or more <registry:objURI> elements that
           contain namespace URIs representing the objects that the
           server is capable of managing for the zone with the required
           "required" attribute that defines whether the server requires
           the use of object represented by the URI.
       <registry:svcExtension>:  An OPTIONAL element that contains one
           or more <registry:extURI> elements that contain namespace
           URIs representing object extensions support by the server for
           the zone with the required "required" attribute that defines
           whether the server requires the use of the object extension
           represented by the URI.
   <registry:crID>:  The OPTIONAL identifier of the client that created
       the zone.
   <registry:crDate>:  The OPTIONAL date and time of zone object
       creation.  The <registry:crDate> element MUST be set if the zone
       object has already been created.
   <registry:upID>:  The OPTIONAL identifier of the client that last
       updated the zone object.  This element MUST NOT be present if the
       zone has never been modified.
   <registry:upDate>:  The OPTIONAL date and time of the most recent
       zone object modification.  This element MUST NOT be present if
       the domain object has never been modified.
   <registry:unsupportedData>:  The OPTIONAL policy associated with
       receipt of unsupported data sent by the client to the server.
       The unsupported data may be an unsupported element or extension.
       The server SHOULD be consistent in the handling of unsupported
       data.  The possible values for the <registry:unsupportedData>
       element include:



Gould, et al.            Expires April 25, 2019                 [Page 6]


Internet-Draft                  registry                    October 2018


       "fail":  The server will fail the command that includes
           unsupported data.
       "ignore":  The server will ignore the unsupported data and
           execute the command.
   <registry:batch>:  The OPTIONAL list of batch jobs.  The
       <registry:batch> element contains the following child elements:


       <registry:batchJob>:  One or more <registry:batchJob> elements
           containing the batch job information.  The
           <registry:batchJob> element contains the following child
           elements:


           <registry:name>:  Name of the batch job, like "autoRenew" or
               "pendingDelete".
           <registry:description>:  OPTIONAL free-form description of
               the batch job, like "Auto Renew Batch" or "Pending Delete
               Batch".
           <registry:schedule>:  One or more <registry:schedule>
               elements, as defined in Section 2.3, that specifies when
               the batch job executes.
   <registry:system>:  The OPTIONAL list of zones that makeup the system
       when the "perSystem" share policy is used for the internal hosts,
       external hosts, or contacts.  The list of zones are listed
       independent of the client's privileges to provision domains in
       the zone.  The <registry:system> element contains the following
       child elements:


       <registry:zone>:  One or more <registry:zone> elements, as
           described in Section 2.1, containing the name of the zone
           that is a member of the system.
   <registry:domain>:  The domain name object policy information per
       [RFC5731].  The <registry:domain> element contains the following
       child elements:


       <registry:domainName>:  One or more <registry:domainName> that
           define the policies for a domain name label for a specific
           level, defined with the "level" attribute, with a minimum
           value of "2" for the second level domain name label level.
           The <registry:domainName> element contains the following
           child elements:


           <registry:minLength>:  An OPTIONAL minimum length of the
               domain name label.



Gould, et al.            Expires April 25, 2019                 [Page 7]


Internet-Draft                  registry                    October 2018


           <registry:maxLength>:  An OPTIONAL maximum length of the
               domain name label.
           <registry:alphaNumStart>:  An OPTIONAL flag indicating
               whether the label must start with an alphanumeric
               character, with a default of "false".
           <registry:alphaNumEnd>:  An OPTIONAL flag indicating whether
               the label must end with an alphanumeric character, with a
               default value of "false".
           <registry:aLabelSupported>:  An OPTIONAL flag indicating
               whether ASCII domain names are supported with a default
               value of "true".
           <registry:uLabelSupported>:  An OPTIONAL flag indicating
               whether non-ASCII domain names are supported with a
               default value of "false".
           <registry:nameRegex>:  The OPTIONAL regular expression, as
               defined in Section 2.4, used to validate the domain name
               label.
           <registry:reservedNames>:  An OPTIONAL element that defines
               the set of reserved domain names starting from that label
               level.  The reserved names can refer to values with more
               than one level which is relative to the level of the
               parent <registry:domainName> element.  The
               <registry:reservedNames> element contains the following
               child elements:


               <registry:reservedName>:  Zero or more
                   <registry:reservedName> elements containing a
                   reserved domain name relative to the level of the
                   parent <registry:domainName> element.
               <registry:reservedNameURI>:  An OPTIONAL URI to an
                   externally defined list of reserved domain names
                   relative to the level of the parent
                   <registry:domainName> element.
       <registry:idn>:  The OPTIONAL Internationalized Domain Name (IDN)
           policy information.  The <registry:idn> element contains the
           following child elements:


           <registry:idnVersion>:  The OPTIONAL server unique version of
               the IDN language rules.
           <registry:idnaVersion>:  An Internationalizing Domain Names
               in Applications (IDNA) version supported by the server.
               IDNA represents a collection of documents that describe
               the protocol and usage for Internationalized Domain for
               Applications like IDNA 2003, with value of 2003, or IDNA
               2008, with value of 2008.




Gould, et al.            Expires April 25, 2019                 [Page 8]


Internet-Draft                  registry                    October 2018


           <registry:unicodeVersion>:  The Unicode version supported by
               the server like the value of "6.0" for Unicode 6.0.
           <registry:encoding>:  The OPTIONAL encoding for transforming
               Unicode characters uniquely and reversibly into DNS
               compatible characters, with a default value of
               "Punycode".
           <registry:commingleAllowed>:  An OPTIONAL value that
               indicates whether commingling of scripts is allowed, with
               a default value of "false".
           <registry:language>:  Zero or more <registry:language>
               elements that defines the supported language codes and
               character code point policy.  The required "code"
               attribute defines the language code for the supported
               language.  The language code SHOULD be an ISO 639 (ISO
               639-1 or ISO 639-2) value.  The <registry:language>
               element contains the following child elements:


               <registry:table>:  The OPTIONAL language table URI that
                   contains the set of code points for the language.
               <registry:variantStrategy>:  An OPTIONAL strategy for the
                   handling of variants for the language.  If no
                   <registry:variantStrategy> element is specified then
                   variants are not supported by the language.  The
                   possible values for the <registry:variantStrategy>
                   element include:


                   "blocked":  Variant registrations are blocked for all
                       clients.
                   "restricted":  Variant registrations are allowed for
                       client of the original IDN registration.
                   "open":  Variant registrations are open to all
                       clients.
       <registry:premiumSupport>:  The OPTIONAL boolean value that
           indicates whether the server supports premium domain names,
           with a default value of "false".
       <registry:contactsSupported>:  The OPTIONAL boolean value that
           indicates whether contacts are supported, with a default
           value of "true".
       <registry:contact>:  Zero or more <registry:contact> elements
           that defines the minimum and maximum number of contacts by
           contact type.  The contact type is defined with the required
           "type" attribute with the possible values of "admin", "tech",
           and "billing", and "custom".  The OPTIONAL "name" attribute
           is an identifier, represented in the 7-bit US-ASCII character
           set, that is used to define the name of the "custom" type.
           If "custom" is the contact "type" value, then the "name"



Gould, et al.            Expires April 25, 2019                 [Page 9]


Internet-Draft                  registry                    October 2018


           attribute MUST be set.  The OPTIONAL "description" attribute
           can be set with a description of the contact type.  The
           <registry:contact> element contains the following child
           elements:


           <registry:min>:  The minimum number of contacts for the
               contact type.
           <registry:max>:  The OPTIONAL maximum number of contacts for
               the contact type.  If the <registry:max> element is not
               defined the maximum number is unbounded.  The
               <registry:max> element MUST NOT be less than the
               <registry:min> element.
       <registry:ns>:  Defines the minimum and maximum number of
           delegated host objects (name servers) that can be associated
           with a domain object.  The <registry:ns> element contains the
           following child elements:


           <registry:min>:  The minimum number of name servers
               associated with a domain object.
           <registry:max>:  The OPTIONAL maximum number of name servers
               associated with a domain object.  If the <registry:max>
               element is not defined the maximum number is unbounded.
               The <registry:max> element MUST NOT be less than the
               <registry:min> element.
       <registry:childHost>:  Defines the OPTIONAL minimum and maximum
           number of subordinate host objects (child hosts) for a domain
           object.  This element is only applicable when using the host
           object model in [RFC5731].  The <registry:childHost> element
           contains the following child elements:


           <registry:min>:  The minimum number of child hosts for a
               domain object.
           <registry:max>:  The OPTIONAL maximum number of child hosts
               for a domain object.  If the <registry:max> element is
               not defined the maximum number is unbounded.  The
               <registry:max> element MUST NOT be less than the
               <registry:min> element.
       <registry:period>:  Zero or more <registry:period> elements that
           defines the supported registration periods and default
           periods by command type.  The required "command" attribute
           defines the command type with sample values of "create",
           "renew", and "transfer".  The <registry:period> element
           contains one of the following elements:





Gould, et al.            Expires April 25, 2019                [Page 10]


Internet-Draft                  registry                    October 2018


           <registry:length>:  The default, minimum, and maximum period
               length for the command type.  The <registry:length>
               element contains the following child elements, where all
               of the child elements require the "unit" attribute with
               possible values of "y" for year and "m" for month:


               <registry:min>:  The minimum supported period length.
               <registry:max>:  The maximum supported period length.
                   The <registry:max> element MUST NOT be less than the
                   <registry:min> element.
               <registry:default>:  The default period length if not
                   defined by the client.
           or <registry:serverDecided>:  The registration period is
               decided by the server based on the relationship to a
               related object that MUST have the same expiration date.
       <registry:exceedMaxExDate>:  Zero or more
           <registry:exceedMaxExDate> elements that defines the action
           taken by the server when executing commands that will result
           in an expiration date that exceeds the maximum expiration
           date.  The required "command" attribute is used to define the
           command with a renewal feature, such as "renew" or
           "transfer".  New commands can be defined that include a
           renewal feature, such as "sync".  The possible values for the
           <registry:exceedMaxExDate> element include:


           "fail":  The server will fail the renewal command when the
               expiration date exceeds the maximum expiration date.  An
               example is if the maximum expiration date is 10 years,
               and a client renews a domain name to 10.5 years, the
               server will fail the renew.
           "clip":  The server will clip the fractional period when the
               expiration date exceeds the maximum expiration date by a
               fraction of a period and will fail the renewal command
               when the expiration date exceeds the maximum expiration
               date by a whole period and above.  An example is if the
               maximum expiration date is 10 years, and the client
               renews a domain to 10.5 years, the server will clip the
               .5 fractional year so that the domain name will expire
               exactly in 10 years.
           "disableRenewal":  The server will execute the command with
               the renewal feature disabled when the expiration date
               exceeds the maximum expiration date.  This may be the
               case for a command like "transfer" that includes a
               renewal feature in [RFC5731].
       <registry:transferHoldPeriod>:  The period of time a domain
           object is in the pending transfer before the transfer is auto



Gould, et al.            Expires April 25, 2019                [Page 11]


Internet-Draft                  registry                    October 2018


           approved by the server.  The <registry:transferHoldPeriod>
           element MUST have the "unit" attribute with the possible
           values of "y" for year, "m" for month, and "d" for day.
       <registry:gracePeriod>:  Zero or more <registry:gracePeriod>
           elements that defines the grace periods by operation type.
           The required "command" attribute defines the operation type
           with the sample values of "create", "renew", "transfer", and
           "autoRenew".  The <registry:gracePeriod> element requires the
           "unit" attribute with the possible values of "d" for day, "h"
           for hour, and "m" for minute.
       <registry:rgp>:  The OPTIONAL Registry Grace Period (RGP) status
           periods.  The <registry:rgp> element contains the following
           child elements, where each child element supports the "unit"
           attribute with the possible values of "y" for year, "m" for
           month, "d" for day, and "h" for hour:


           <registry:redemptionPeriod>:  The length of time that a
               domain object will remain in the redemptionPeriod status
               unless the restore request command is received.
           <registry:pendingRestore>:  The length of time that the
               domain object will remain in the pendingRestore status
               unless the restore report command is received.
           <registry:pendingDelete>:  The length of time that the domain
               object will remain in the pendingDelete status prior to
               being purged.
       <registry:dnssec>:  The OPTIONAL DNS Security Extensions (DNSSEC)
           policies for the server.  The <registry:dnssec> element
           contains the following child elements:


           <registry:dsDataInterface>:  Defines the DS Data Interface,
               as defined in [RFC5910], policies.  The
               <registry:dsDataInterface> element contains the following
               child elements:


               <registry:min>:  The minimum number of DS associated with
                   the domain object.
               <registry:max>:  The maximum number of DS associated with
                   the domain object.  The <registry:max> element MUST
                   NOT be less than the <registry:min> element.
               <registry:alg>:  Zero or more <registry:alg> elements
                   that define the supported algorithms as described in
                   section 5.1.2 of [RFC4034].
               <registry:digestType>:  Zero or more
                   <registry:digestType> elements that define the




Gould, et al.            Expires April 25, 2019                [Page 12]


Internet-Draft                  registry                    October 2018


                   supported digest types as described in section 5.1.3
                   of [RFC4034].
           <registry:keyDataInterface>:  Defines the Key Data Interface,
               as defined in [RFC5910], policies.  The
               <registry:keyDataInterface> element contains the
               following child elements:


               <registry:min>:  The minimum number of keys associated
                   with the domain object.
               <registry:max>:  The maximum number of keys associated
                   with the domain object.  The <registry:max> element
                   MUST NOT be less than the <registry:min> element.
               <registry:flags>:  Zero or more <registry:flags> elements
                   that define the supported flags field values, as
                   described in section 2.1.1 of [RFC4034].
               <registry:protocol>:  Zero or more <registry:protocol>
                   elements that define the supported protocols, as
                   described in section 2.1.2 of [RFC4034].
               <registry:alg>:  Zero or more <registry:alg> elements
                   that define the supported algorithms, as described in
                   section 2.1.3 of [RFC4034].
           <registry:maxSigLife>:  Defines the maximum signature
               lifetime policies.  The <registry:maxSigLife> element
               contains the following child elements:


               <registry:clientDefined>:  An OPTIONAL boolean flag
                   indicating whether the client can set the maximum
                   signature lifetime, with a default value of "false".
               <registry:default>:  The OPTIONAL default maximum
                   signature lifetime set by the server.
               <registry:min>:  An OPTIONAL minimum signature lifetime
                   supported.  The <registry:min> element MUST NOT be
                   defined if the <registry:clientDefined> element value
                   is "false".
               <registry:max>:  An OPTIONAL maximum signature lifetime
                   supported.  The <registry:max> element MUST NOT be
                   defined if the <registry:clientDefined> element value
                   is "false".  The <registry:max> element MUST NOT be
                   less than the <registry:min> element.
           <registry:urgent>:  An OPTIONAL flag that of whether the
               client can specify the urgent attribute for DNSSEC
               updates, with a default value of "false".
       <registry:maxCheckDomain>:  The maximum number of domain names
           (<domain:name> elements) that can be included in a domain
           check command defined in [RFC5731].




Gould, et al.            Expires April 25, 2019                [Page 13]


Internet-Draft                  registry                    October 2018


       <registry:supportedStatus>:  The OPTIONAL set of supported domain
           statuses that SHOULD match the statuses defined in [RFC5731].
       <registry:authInfoRegEx>:  The OPTIONAL regular expression, as
           defined in Section 2.4, used to validate the domain object
           authorization information value.
       <registry:expiryPolicy>:  The OPTIONAL expiry policy used to
           define what happens when the domain object expires, with a
           default value of "autoRenew".  The possible values for the
           <registry:expiryPolicy> element include:


           "autoRenew":  The domain object will auto-renew at expiry.
               The client can receive a credit for the auto-renew if the
               domain object is deleted or transferred within the auto-
               renew grace period.
           "autoDelete":  The domain object will auto-delete at expiry.
               The client needs to explicitly renew the domain object
               prior to its expiry to ensure that it does not get
               deleted.
           "autoExpire":  The domain object will auto-expire at expiry
               that may include the server placing the domain object on
               serverHold.
           "autoParked":  The domain object will be auto-parked at
               expiry that results in the resolution of the domain
               object going to a parked page.
       <registry:nullAuthInfoSupported>:  An OPTIONAL flag indicating
           whether the <domain:null> element in [RFC5731] is supported
           to remove the authorization information, with a default value
           of "false".
       <registry:hostModelSupported>:  The OPTIONAL definition of which
           [RFC5731] host model is used by the server.  The possible
           values include "hostObj" for the host object model and
           "hostAttr" for the host attribute model, with the default
           value of "hostObj".
   <registry:host>:  The host object policy information per [RFC5732].
       The <registry:host> element contains the following child
       elements:


       <registry:internal>:  Defines the minimum and maximum number of
           IP addresses supported for an internal host.  The
           <registry:internal> elements contains the following child
           elements:


           <registry:minIP>:  Minimum number of IP addresses supported
               for an internal host.




Gould, et al.            Expires April 25, 2019                [Page 14]


Internet-Draft                  registry                    October 2018


           <registry:maxIP>:  Maximum number of IP addresses supported
               for an internal host.  The <registry:maxIP> element MUST
               NOT be less than the <registry:minIP> element.
           <registry:sharePolicy>:  The OPTIONAL policy for the sharing
               of internal hosts in the server.  The possible shared
               policy values include:


               "perZone":  The internal hosts are shared across all
                   domains of the zone.  There is a single pool of
                   internal hosts defined for the zone.
               "perSystem":  The internal hosts are shared across all
                   zones of the system.  There is a single pool of
                   internal hosts across all of the zones supported by
                   the system.  The system MUST be defined using the
                   <registry:system> element.
           <registry:uniqueIpAddressesRequired>:  The OPTIONAL boolean
               value that indicates that all of the IP addresses for the
               host object must be unique, with a default value of
               "false".
       <registry:external>:  Defines the policies for external hosts.
           The <registry:external> elements contains the following child
           elements:


           <registry:minIP>:  Minimum number of IP addresses supported
               for an external host.
           <registry:maxIP>:  Maximum number of IP addresses supported
               for an external host.  The <registry:maxIP> element MUST
               NOT be less than the <registry:minIP> element.
           <registry:sharePolicy>:  The OPTIONAL policy for the sharing
               of external hosts in the server.  The possible shared
               policy values include:


               "perRegistrar":  The external hosts are shared across all
                   domains of the registrar.  There is a single pool of
                   external hosts defined per registrar.
               "perZone":  The external hosts are shared across all
                   domains of the zone.  There is a single pool of
                   external hosts defined for the zone.
               "perSystem":  The external hosts are shared across all
                   zones of the system.  There is a single pool of
                   external hosts across all of the zones supported by
                   the system.  The system MUST be defined using the
                   <registry:system> element.
           <registry:uniqueIpAddressesRequired>:  The OPTIONAL boolean
               value that indicates that all of the IP addresses for the



Gould, et al.            Expires April 25, 2019                [Page 15]


Internet-Draft                  registry                    October 2018


               host object must be unique, with a default value of
               "false".
       <registry:nameRegex>:  The OPTIONAL regular expression, as
           defined in Section 2.4, used to validate the host name value.
       <registry:maxCheckHost>:  The OPTIONAL maximum number of host
           names (<host:name> elements) that can be included in a host
           check command defined in [RFC5732].  This element is only
           applicable when using the host object model in [RFC5731] and
           supporting host objects in [RFC5732].
       <registry:supportedStatus>:  The OPTIONAL set of supported host
           statuses that SHOULD match the statuses defined in [RFC5732].
       <registry:invalidIP>:  Zero or more <registry:invalidIP> elements
           that defines the URI of an externally defined list of invalid
           IP addresses.  The IP addresses referenced by the list of
           <registry:invalidIP> elements should be combined and
           normalized by the client to define the complete set of
           invalid IP addresses.
   <registry:contact>:  The OPTIONAL contact object policy information
       per [RFC5733].  The <registry:contact> element contains the
       following child elements:


       <registry:contactIdRegex>:  The OPTIONAL regular expression, as
           defined in Section 2.4, used to validate the <contact:id>
           element defined in [RFC5733].
       <registry:contactIdPrefix>:  The OPTIONAL client-specific prefix
           that must be used for the <contact:id> element defined in
           [RFC5733].  For example, if the client is assigned the
           client-specific prefix "EX", every contact created by the
           client must have a <contact:id> element value prefixed with
           "EX", as in "EX123".
       <registry:sharePolicy>:  The OPTIONAL policy for the sharing of
           contacts in the server.  The possible shared policy values
           include:


           "perZone":  The contacts are shared across all objects of the
               zone.  There is a single pool of contacts defined for the
               zone.
           "perSystem":  The contacts are shared across all zones of the
               system.  There is a single pool of contacts across all of
               the zones supported by the system.  The system MUST be
               defined using the <registry:system> element.
       <registry:postalInfoTypeSupport>:  The policy associated with the
           postal-address information, represented by the
           <contact:postalInfo> element in [RFC5733], supported with the
           following possible values:




Gould, et al.            Expires April 25, 2019                [Page 16]


Internet-Draft                  registry                    October 2018


           "loc":  Indicates that a single <contact:postalInfo> element
               is supported with the type "loc".
           "int":  Indicates that a single <contact:postalInfo> element
               is supported with the type "int".
           "locOrInt":  Indicates that a single <contact:postalInfo>
               element is supported with the type "loc" or "int".
           "locAndInt":  Indicates that up to two <contact:postalInfo>
               elements is supported for defining both the "loc" and the
               "int" type.  This policy does not indicate that both must
               be provided.
           "intOptLoc":  Indicates that the <contact:postalInfo> element
               with type "int" is required and a second
               <contact:postalInfo> element with the type "loc" is
               optional.
           "locOptInt":  Indicates that the <contact:postalInfo> element
               with type "loc" is required and a second
               <contact:postalInfo> element with the type "int" is
               optional.
       <registry:postalInfo>:  The postal-address information policy
           information.  The <registry:postalInfo> element contains the
           following child elements:


           <registry:locCharRegex>:  The OPTIONAL regular expression ,
               as defined in Section 2.4, that represents the character
               set that can be used for the <contact:postalInfo>
               localized form (type="loc") element content.  The regular
               expression MUST be applicable to all <contact:postalInfo>
               element content.
           <registry:name>:  The minimum and maximum length of
               <contact:name> element defined [RFC5733] using the
               <registry:minLength> and <registry:maxLength> child
               elements, respectively.
           <registry:org>:  The minimum and maximum length of the
               <contact:org> element defined in [RFC5733] using the
               <registry:minLength> and <registry:maxLength> child
               elements, respectively.
           <registry:address>:  The address information policy
               information.  The <registry:address> element contains the
               following child elements:


               <registry:street>:  The minimum and maximum length and
                   the minimum and maximum number of the
                   <contact:street> elements defined in [RFC5733].  The
                   <registry:street> element contains the following
                   child elements:




Gould, et al.            Expires April 25, 2019                [Page 17]


Internet-Draft                  registry                    October 2018


                   <registry:minLength>:  The minimum length of the
                       <contact:street> elements.
                   <registry:maxLength>:  The maximum length of the
                       <contact:street> elements.  The
                       <registry:maxLength> element MUST NOT be less
                       than the <registry:minLength> element.
                   <registry:minEntry>:  The minimum number of
                       <contact:street> elements.
                   <registry:maxEntry>:  The maximum number of
                       <contact:street> elements.  The
                       <registry:maxEntry> element MUST NOT be less than
                       the <registry:minEntry> element.
               <registry:city>:  The minimum and maximum length of the
                   <contact:city> element defined in [RFC5733] using the
                   <registry:minLength> and <registry:maxLength> child
                   elements, respectively.
               <registry:sp>:  The minimum and maximum length of the
                   <contact:sp> element defined in [RFC5733] using the
                   <registry:minLength> and <registry:maxLength> child
                   elements, respectively.
               <registry:pc>:  The minimum and maximum length of the
                   <contact:pc> element defined in [RFC5733] using the
                   <registry:minLength> and <registry:maxLength> child
                   elements, respectively.
           <registry:voiceRequired>:  An OPTIONAL boolean flag
               indicating whether the server requires the
               <contact:voice> element to be defined, with a default
               value of "false".
           <registry:voiceExt>:  The OPTIONAL minimum and maximum length
               of the <contact:voice> extension "x" attribute defined in
               [RFC5733] using the <registry:minLength> and
               <registry:maxLength> child elements, respectively.
           <registry:emailRegex>:  An OPTIONAL <registry:emailRegex>
               element that defines the regular expression, as defined
               in Section 2.4, used to validate the <contact:email> in
               [RFC5733].
       <registry:maxCheckContact>:  The maximum number of contact
           identifiers (<contact:id> elements) that can be included in a
           contact check command defined in [RFC5733].
       <registry:authInfoRegex>:  The OPTIONAL regular expression, as
           defined in Section 2.4, used to validate the contact object
           authorization information value.
       <registry:clientDisclosureSupported>:  The OPTIONAL flag that
           indicates whether the server supports the client to identify
           elements that require exception server-operator handling to
           allow or restrict disclosure to third parties defined in
           [RFC5733] with a default of "false".




Gould, et al.            Expires April 25, 2019                [Page 18]


Internet-Draft                  registry                    October 2018


       <registry:supportedStatus>:  The OPTIONAL set of supported
           contact statuses that SHOULD match the statuses defined in
           [RFC5733].
       <registry:transferHoldPeriod>:  The OPTIONAL period of time a
           contact object is in the pending transfer before the transfer
           is auto approved by the server.  The
           <registry:transferHoldPeriod> element MUST have the "unit"
           attribute with the possible values of "y" for year, "m" for
           month, and "d" for day.
       <registry:privacyContactSupported>:  An OPTIONAL boolean value
           that indicates whether a privacy contact is supported, with a
           default value of "true".
       <registry:proxyContactSupported>:  An OPTIONAL boolean value that
           indicates whether a proxy contact is supported, with a
           default value of "true".

   Example of a <registry:zone> element:

   <registry:zone>
     <registry:name>EXAMPLE</registry:name>
     <registry:group>STANDARD</registry:group>
     <registry:services>
       <registry:objURI required="true">
         urn:ietf:params:xml:ns:domain-1.0
       </registry:objURI>
       <registry:objURI required="true">
         urn:ietf:params:xml:ns:host-1.0
       </registry:objURI>
       <registry:objURI required="true">
         urn:ietf:params:xml:ns:contact-1.0
       </registry:objURI>
       <registry:svcExtension>
         <registry:extURI required="true">
           urn:ietf:params:xml:ns:rgp-1.0
         </registry:extURI>
         <registry:extURI required="true">
           urn:ietf:params:xml:ns:secDNS-1.1
         </registry:extURI>
         <registry:extURI required="true">
           http://www.verisign-grs.com/epp/namestoreExt-1.1
         </registry:extURI>
         <registry:extURI required="false">
           http://www.verisign.com/epp/idnLang-1.0
         </registry:extURI>
       </registry:svcExtension>
     </registry:services>
     <registry:crID>clientX</registry:crID>
     <registry:crDate>2012-10-01T00:00:00.0Z



Gould, et al.            Expires April 25, 2019                [Page 19]


Internet-Draft                  registry                    October 2018


     </registry:crDate>
     <registry:upID>clientY</registry:upID>
     <registry:upDate>2012-10-15T00:00:00.0Z
     </registry:upDate>
     <registry:unsupportedData>fail
     </registry:unsupportedData>
     <registry:batch>
       <registry:batchJob>
         <registry:name>localTzBatch</registry:name>
         <registry:description>
           Batch with multiple local time schedules (name and offset)
         </registry:description>
         <registry:schedule frequency="daily" tz="EST5EDT">
          04:00:00
         </registry:schedule>
         <registry:schedule frequency="daily">
          07:00:00-05:00
         </registry:schedule>
        </registry:batchJob>
       <registry:batchJob>
         <registry:name>multiBatchSchedule</registry:name>
         <registry:description>
           Batch with multiple UTC schedules
         </registry:description>
         <registry:schedule frequency="daily">
          12:00:00Z
         </registry:schedule>
         <registry:schedule frequency="weekly" dayOfWeek="0">
          00:00:00Z
         </registry:schedule>
         <registry:schedule frequency="monthly" dayOfMonth="15">
          17:00:00Z
         </registry:schedule>
        </registry:batchJob>
     </registry:batch>
     <registry:system>
       <registry:zone form="aLabel">EXAMPLE
       </registry:zone>
       <registry:zone form="aLabel">EXAMPLE2
       </registry:zone>
     </registry:system>
     <registry:domain>
       <registry:domainName level="2">
         <registry:minLength>5
         </registry:minLength>
         <registry:maxLength>50
         </registry:maxLength>
         <registry:alphaNumStart>true



Gould, et al.            Expires April 25, 2019                [Page 20]


Internet-Draft                  registry                    October 2018


         </registry:alphaNumStart>
         <registry:alphaNumEnd>false
         </registry:alphaNumEnd>
         <registry:aLabelSupported>true
         </registry:aLabelSupported>
         <registry:uLabelSupported>false
         </registry:uLabelSupported>
         <registry:nameRegex>
           <registry:expression>
           ^[a-zA-Z\d][a-zA-Z\d\-]{4,49}$
           </registry:expression>
           <registry:description>
             5 to 50 DNS characters starting with alphanumeric
           </registry:description>
         </registry:nameRegex>
         <registry:reservedNames>
           <registry:reservedName>reserved1
           </registry:reservedName>
         </registry:reservedNames>
       </registry:domainName>
       <registry:idn>
         <registry:idnVersion>4.1
         </registry:idnVersion>
         <registry:idnaVersion>2008
         </registry:idnaVersion>
         <registry:unicodeVersion>6.0
         </registry:unicodeVersion>
         <registry:encoding>Punycode
         </registry:encoding>
         <registry:commingleAllowed>false
         </registry:commingleAllowed>
         <registry:language code="LANG-1">
           <registry:table>
             http://www.iana.org/idn-tables/test_tab1_1.1.txt
           </registry:table>
           <registry:variantStrategy>blocked
           </registry:variantStrategy>
         </registry:language>
       </registry:idn>
       <registry:premiumSupport>false
       </registry:premiumSupport>
       <registry:contact type="admin">
         <registry:min>1</registry:min>
         <registry:max>1</registry:max>
       </registry:contact>
       <registry:contact type="tech">
         <registry:min>1</registry:min>
         <registry:max>1</registry:max>



Gould, et al.            Expires April 25, 2019                [Page 21]


Internet-Draft                  registry                    October 2018


       </registry:contact>
       <registry:contact type="billing">
         <registry:min>0</registry:min>
         <registry:max>0</registry:max>
       </registry:contact>
       <registry:contact
         type="custom"
         name="abuse"
         description="Abuse Contact"
       >
         <registry:min>0</registry:min>
         <registry:max>1</registry:max>
       </registry:contact>
       <registry:ns>
         <registry:min>0</registry:min>
         <registry:max>13</registry:max>
       </registry:ns>
       <registry:childHost>
         <registry:min>0</registry:min>
       </registry:childHost>
       <registry:period command="create">
         <registry:length>
           <registry:min unit="y">1</registry:min>
           <registry:max unit="y">10</registry:max>
           <registry:default unit="y">1</registry:default>
         </registry:length>
       </registry:period>
       <registry:exceedMaxExDate command="renew">
         fail
       </registry:exceedMaxExDate>
       <registry:exceedMaxExDate command="transfer">
         clip
       </registry:exceedMaxExDate>
       <registry:transferHoldPeriod unit="d">5
       </registry:transferHoldPeriod>
       <registry:gracePeriod
         command="create"
         unit="d"
       >5
       </registry:gracePeriod>
       <registry:gracePeriod
         command="renew"
         unit="d"
       >5
       </registry:gracePeriod>
       <registry:gracePeriod
         command="transfer"
         unit="d"



Gould, et al.            Expires April 25, 2019                [Page 22]


Internet-Draft                  registry                    October 2018


       >5
       </registry:gracePeriod>
       <registry:gracePeriod
         command="autoRenew"
         unit="d"
       >45
       </registry:gracePeriod>
       <registry:rgp>
         <registry:redemptionPeriod unit="d">30
         </registry:redemptionPeriod>
         <registry:pendingRestore unit="d">7
         </registry:pendingRestore>
         <registry:pendingDelete unit="d">5
         </registry:pendingDelete>
       </registry:rgp>
       <registry:dnssec>
         <registry:dsDataInterface>
           <registry:min>0</registry:min>
           <registry:max>13</registry:max>
           <registry:alg>3</registry:alg>
           <registry:digestType>1</registry:digestType>
         </registry:dsDataInterface>
         <registry:maxSigLife>
           <registry:clientDefined>false
           </registry:clientDefined>
         </registry:maxSigLife>
       </registry:dnssec>
       <registry:maxCheckDomain>5
       </registry:maxCheckDomain>
       <registry:supportedStatus>
         <registry:status>ok
         </registry:status>
         <registry:status>clientDeleteProhibited
         </registry:status>
         <registry:status>serverDeleteProhibited
         </registry:status>
         <registry:status>clientHold
         </registry:status>
         <registry:status>serverHold
         </registry:status>
         <registry:status>clientRenewProhibited
         </registry:status>
         <registry:status>serverRenewProhibited
         </registry:status>
         <registry:status>clientTransferProhibited
         </registry:status>
         <registry:status>serverTransferProhibited
         </registry:status>



Gould, et al.            Expires April 25, 2019                [Page 23]


Internet-Draft                  registry                    October 2018


         <registry:status>clientUpdateProhibited
         </registry:status>
         <registry:status>serverUpdateProhibited
         </registry:status>
         <registry:status>inactive
         </registry:status>
         <registry:status>pendingDelete
         </registry:status>
         <registry:status>pendingTransfer
         </registry:status>
       </registry:supportedStatus>
       <registry:authInfoRegex>
         <registry:expression>^.*$</registry:expression>
       </registry:authInfoRegex>
       <registry:expiryPolicy>autoRenew
       </registry:expiryPolicy>
       <registry:nullAuthInfoSupported>false
       </registry:nullAuthInfoSupported>
       <registry:hostModelSupported>hostObj
       </registry:hostModelSupported>
     </registry:domain>
     <registry:host>
       <registry:internal>
         <registry:minIP>1</registry:minIP>
         <registry:maxIP>13</registry:maxIP>
         <registry:sharePolicy>perSystem
         </registry:sharePolicy>
         <registry:uniqueIpAddressesRequired>false
         </registry:uniqueIpAddressesRequired>
       </registry:internal>
       <registry:external>
         <registry:minIP>0</registry:minIP>
         <registry:maxIP>0</registry:maxIP>
         <registry:sharePolicy>perSystem
         </registry:sharePolicy>
       </registry:external>
       <registry:nameRegex>
         <registry:expression>^.*$
         </registry:expression>
       </registry:nameRegex>
       <registry:maxCheckHost>5
       </registry:maxCheckHost>
       <registry:supportedStatus>
         <registry:status>ok</registry:status>
         <registry:status>clientDeleteProhibited
         </registry:status>
         <registry:status>serverDeleteProhibited
         </registry:status>



Gould, et al.            Expires April 25, 2019                [Page 24]


Internet-Draft                  registry                    October 2018


         <registry:status>clientUpdateProhibited
         </registry:status>
         <registry:status>serverUpdateProhibited
         </registry:status>
         <registry:status>linked
         </registry:status>
         <registry:status>pendingDelete
         </registry:status>
         <registry:status>pendingTransfer
         </registry:status>
       </registry:supportedStatus>
       <registry:invalidIP>http://www.example.com/invalidip-1.txt
       </registry:invalidIP>
       <registry:invalidIP>http://www.example.com/invalidip-2.txt
       </registry:invalidIP>
     </registry:host>
     <registry:contact>
       <registry:contactIdRegex>
         <registry:expression>^.*$
         </registry:expression>
       </registry:contactIdRegex>
       <registry:contactIdPrefix>EX
       </registry:contactIdPrefix>
       <registry:sharePolicy>perZone
       </registry:sharePolicy>
       <registry:postalInfoTypeSupport>locOrInt
       </registry:postalInfoTypeSupport>
       <registry:postalInfo>
         <registry:locCharRegex>
           <registry:expression>^.*$
           </registry:expression>
         </registry:locCharRegex>
         <registry:name>
           <registry:minLength>5</registry:minLength>
           <registry:maxLength>15</registry:maxLength>
         </registry:name>
         <registry:org>
           <registry:minLength>2</registry:minLength>
           <registry:maxLength>40</registry:maxLength>
         </registry:org>
         <registry:address>
           <registry:street>
             <registry:minLength>1</registry:minLength>
             <registry:maxLength>40</registry:maxLength>
             <registry:minEntry>1</registry:minEntry>
             <registry:maxEntry>3</registry:maxEntry>
           </registry:street>
           <registry:city>



Gould, et al.            Expires April 25, 2019                [Page 25]


Internet-Draft                  registry                    October 2018


             <registry:minLength>1</registry:minLength>
             <registry:maxLength>40</registry:maxLength>
           </registry:city>
           <registry:sp>
             <registry:minLength>1</registry:minLength>
             <registry:maxLength>40</registry:maxLength>
           </registry:sp>
           <registry:pc>
             <registry:minLength>1</registry:minLength>
             <registry:maxLength>40</registry:maxLength>
           </registry:pc>
         </registry:address>
         <registry:voiceRequired>false
         </registry:voiceRequired>
         <registry:voiceExt>
           <registry:minLength>1</registry:minLength>
           <registry:maxLength>40</registry:maxLength>
         </registry:voiceExt>
         <registry:faxExt>
           <registry:minLength>1</registry:minLength>
           <registry:maxLength>40</registry:maxLength>
         </registry:faxExt>
         <registry:emailRegex>
           <registry:expression>^.+\..+$
           </registry:expression>
         </registry:emailRegex>
       </registry:postalInfo>
       <registry:maxCheckContact>5</registry:maxCheckContact>
       <registry:authInfoRegex>
         <registry:expression>^.*$</registry:expression>
       </registry:authInfoRegex>
       <registry:clientDisclosureSupported>false
       </registry:clientDisclosureSupported>
       <registry:supportedStatus>
         <registry:status>ok
         </registry:status>
         <registry:status>clientDeleteProhibited
         </registry:status>
         <registry:status>serverDeleteProhibited
         </registry:status>
         <registry:status>clientTransferProhibited
         </registry:status>
         <registry:status>serverTransferProhibited
         </registry:status>
         <registry:status>clientUpdateProhibited
         </registry:status>
         <registry:status>serverUpdateProhibited
         </registry:status>



Gould, et al.            Expires April 25, 2019                [Page 26]


Internet-Draft                  registry                    October 2018


         <registry:status>linked
         </registry:status>
         <registry:status>pendingDelete
         </registry:status>
         <registry:status>pendingTransfer
         </registry:status>
       </registry:supportedStatus>
       <registry:transferHoldPeriod unit="d">5
       </registry:transferHoldPeriod>
       <registry:privacyContactSupported>true
       </registry:privacyContactSupported>
       <registry:proxyContactSupported>true
       </registry:proxyContactSupported>
     </registry:contact>
   </registry:zone>

3.  EPP Command Mapping

   A detailed description of the EPP syntax and semantics can be found
   in the EPP core protocol specification [RFC5730].  The command
   mappings described here are specifically for use in provisioning and
   managing TLD names via EPP.

3.1.  EPP Query Commands

   EPP [RFC5730] provides three commands to retrieve object information:
   <check> to determine if an object is known to the server, <info> to
   retrieve detailed information associated with an object, and
   <transfer> to retrieve object transfer status information.

3.1.1.  EPP <check> Command

   The EPP <check> command is used to determine if the server currently
   supports a zone.  If the response indicates that the zone is not
   available, then it is currently supported; otherwise it MAY be
   available to be created by an authorized client.

   In addition to the standard EPP command elements, the <check> command
   MUST contain a <registry:check> element that identifies the registry
   namespace.  The <registry:check> element contains the following child
   elements:

   <registry:name>:  One or more <registry:name> elements, as described
       in Section 2.1, that contain the fully qualified names of the
       zone objects to be queried.






Gould, et al.            Expires April 25, 2019                [Page 27]


Internet-Draft                  registry                    October 2018


   Example <check> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <check>
   C:      <registry:check
   C:       xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2">
   C:        <registry:name>EXAMPLE1</registry:name>
   C:        <registry:name>EXAMPLE2</registry:name>
   C:        <registry:name>EXAMPLE3</registry:name>
   C:      </registry:check>
   C:    </check>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When a <check> command has been processed successfully, the EPP
   <resData> element MUST contain a child <registry:chkData> element
   that identifies the registry namespace.  The <registry:chkData>
   element contains one or more <registry:cd> elements that contain the
   following child elements:

   <registry:name>:  element that contains the fully qualified name of
       the queried zone object, as described in Section 2.1.  This
       element MUST contain an "avail" attribute whose value indicates
       zone is currently supported or availability at the moment the
       <check> command was completed for an authorized client.  A value
       of "1" or "true" means that the zone object is available for an
       authorized client.  A value of "0" or "false" means that the zone
       object is currently supported by the server.
   <registry:reason>:  The OPTIONAL element that MAY be provided when a
       zone object is not available for provisioning.  If present, this
       element contains server-specific text to help explain why the
       zone object is unavailable.  This text MUST be represented in the
       response language previously negotiated with the client; an
       OPTIONAL "lang" attribute MAY be present to identify the language
       if the negotiated value is something other than a default value
       of "en" (English).












Gould, et al.            Expires April 25, 2019                [Page 28]


Internet-Draft                  registry                    October 2018


   Example <check> response:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <registry:chkData
   S:        xmlns:registry=
   S:        "urn:ietf:params:xml:ns:epp:registry-0.2">
   S:        <registry:cd>
   S:          <registry:name avail="0">EXAMPLE1</registry:name>
   S:          <registry:reason>Client not authorized
   S:          </registry:reason>
   S:        </registry:cd>
   S:        <registry:cd>
   S:          <registry:name avail="0">EXAMPLE2
   S:          </registry:name>
   S:          <registry:reason>Already supported
   S:          </registry:reason>
   S:        </registry:cd>
   S:        <registry:cd>
   S:          <registry:name avail="1">EXAMPLE3
   S:          </registry:name>
   S:        </registry:cd>
   S:      </registry:chkData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54322-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if a <check> command cannot be
   processed for any reason.

3.1.2.  EPP <info> Command

   The EPP <info> command is used to retrieve information associated
   with a zone object.  The response to this command MAY vary depending
   on the identity of the querying client, use of authorization
   information, and server policy towards unauthorized clients.  Server
   policy determines which OPTIONAL elements are returned.





Gould, et al.            Expires April 25, 2019                [Page 29]


Internet-Draft                  registry                    October 2018


   In addition to the standard EPP command elements, the <info> command
   MUST contain a <registry:info> element that identifies the registry
   namespace.  The <registry:info> element contains one of the following
   three child elements:

   <registry:all>:  Element that is empty and that indicates to return
       the client accessible and/or available zone objects with a
       summary set of attributes per zone object.  The scope of the
       zones to return is defined by the "scope" attribute, with the
       possible values of "accessible" to indicate the zones that are
       assessible to the client, "available" to indicate the zones that
       are not accessible to the client but available on the server, and
       "both" to indicate both accessible and available zones.  The
       default value for the "scope" attribute is "accessible".  It is
       up to server policy what available zones the client is authorized
       to get information for.
   <registry:name>:  Element that contains the fully qualified name of
       the zone object, as described in Section 2.1, to be queried for a
       full set of attributes for the zone object.
   <registry:system>:  Element that is empty and that indicates that the
       registry system attributes, like maximum connections and
       timeouts, are queried.

   Example <info> command to query for a summary set of attributes for
   all of the accessible and available zone objects:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <info>
   C:      <registry:info
   C:        xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2">
   C:        <registry:all scope="both"/>
   C:      </registry:info>
   C:    </info>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>













Gould, et al.            Expires April 25, 2019                [Page 30]


Internet-Draft                  registry                    October 2018


   Example <info> command to query for the full set of "EXAMPLE" zone
   object attributes:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <info>
   C:      <registry:info
   C:        xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2">
   C:        <registry:name>EXAMPLE</registry:name>
   C:      </registry:info>
   C:    </info>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   Example <info> command to query for registry system attributes:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <info>
   C:      <registry:info
   C:        xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2">
   C:        <registry:system/>
   C:      </registry:info>
   C:    </info>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When an <info> command has been processed successfully, the EPP
   <resData> element MUST contain a child <registry:infData> element
   that identifies the registry namespace.  The <registry:infData>
   element contains one of the three following child elements:

   <registry:zoneList>:  Element that contains the list of
       <registry:zone> elements representing the zones accessible or
       available to the client with a set of summary attributes per
       zone.  It is up to server policy what available zones the client
       is authorized to get information for.  The <registry:zone>
       element includes the boolean "accessible" attribute that
       indicates whether the zone is accessible to the client, with a
       default value of "true".  If the "accessible" attribute value is
       "false", the client does not have access to the zone, but the
       zone is available on the server.  The <registry:zone> element
       contains the following child elements:




Gould, et al.            Expires April 25, 2019                [Page 31]


Internet-Draft                  registry                    October 2018


       <registry:name>:  Element that contains the fully qualified name
           of the queried zone object, as described in Section 2.1.
       <registry:crDate>:  The date and time of zone object creation.
       <registry:upDate>:  The OPTIONAL date and time of the most recent
           zone object modification.  This element MUST NOT be present
           if the zone object has never been modified.
   <registry:zone>:  Element that contains the full set of attributes
       for the zone name as defined in Section 2.5.  The <registry:zone>
       element includes the boolean "accessible" attribute that
       indicates whether the zone is accessible to the client, with a
       default value of "true".  If the "accessible" attribute value is
       "false", the client does not have access to the zone, but the
       zone is available on the server.
   <registry:system>:  Element that contains registry system attributes.
       The <registry:system> element contains the following child
       elements:


       <registry:maxConnections>:  The OPTIONAL element that contains
           the maximum number of connections that the client can
           establish with the registry system.
       <registry:idleTimeout>:  The OPTIONAL element that contains the
           idle timeout for a connection in milliseconds.  If a
           connection does not receive a command within
           <registry:idleTimeout> milliseconds, the server will close
           the connection.
       <registry:absoluteTimeout>:  The OPTIONAL element that contains
           the absolute timeout for a connection in milliseconds.  The
           absolute timeout represents the maximum duration in
           milliseconds that a connection can be established.  The
           server will close a connection that has been established for
           more than <registry:absoluteTimeout> milliseconds.
       <registry:commandTimeout>:  The OPTIONAL element that contains
           the command timeout for a connection in milliseconds.  The
           server will close a connection that has an active command
           that exceeds <registry:commandTimeout> milliseconds.
       <registry:transLimit>:  The OPTIONAL element that contains the
           maximum number of transactions that can be submitted on the
           connection per the "perMs" attribute milliseconds.  It is up
           to server policy what to do with the connection when the
           client exceeds the <registry:transLimit>.










Gould, et al.            Expires April 25, 2019                [Page 32]


Internet-Draft                  registry                    October 2018


   Example <info> response to a query for a summary of all of the
   supported zone objects:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <registry:infData
   S:        xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2">
   S:        <registry:zoneList>
   S:          <registry:zone accessible="true">
   S:            <registry:name>EXAMPLE1</registry:name>
   S:            <registry:crDate>2012-10-01T00:00:00.0Z
   S:            </registry:crDate>
   S:            <registry:upDate>2012-10-15T00:00:00.0Z
   S:            </registry:upDate>
   S:          </registry:zone>
   S:          <registry:zone accessible="false">
   S:            <registry:name>EXAMPLE2</registry:name>
   S:            <registry:crDate>2012-09-01T00:00:00.0Z
   S:            </registry:crDate>
   S:            <registry:upDate>2012-09-19T00:00:00.0Z
   S:            </registry:upDate>
   S:          </registry:zone>
   S:        </registry:zoneList>
   S:      </registry:infData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54322-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>















Gould, et al.            Expires April 25, 2019                [Page 33]


Internet-Draft                  registry                    October 2018


   Example <info> response to query for the full set of "EXAMPLE" zone
   object attributes:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <registry:infData
   S:        xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2">
   S:        <registry:zone accessible="true">
   S:          <registry:name>EXAMPLE</registry:name>
   S:          ...
   S:        </registry:zone>
   S:      </registry:infData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54322-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>



























Gould, et al.            Expires April 25, 2019                [Page 34]


Internet-Draft                  registry                    October 2018


   Example <info> response to query for the registry system attributes:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <registry:infData
   S:        xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2">
   S:        <registry:system>
   S:          <registry:maxConnections>200
   S:          </registry:maxConnections>
   S:          <registry:idleTimeout>600000
   S:          </registry:idleTimeout>
   S:          <registry:absoluteTimeout>86400000
   S:          </registry:absoluteTimeout>
   S:          <registry:commandTimeout>10000
   S:          </registry:commandTimeout>
   S:          <registry:transLimit perMs="1000">10
   S:          </registry:transLimit>
   S:       </registry:system>
   S:      </registry:infData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54322-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if an <info> command cannot be
   processed for any reason.

3.1.3.  EPP <transfer> Query Command

   Transfer semantics do not directly apply to zone objects, so there is
   no mapping defined for the EPP <transfer> query command.

3.2.  EPP Transform Commands

   EPP provides five commands to transform objects: <create> to create
   an instance of an object, <delete> to delete an instance of an
   object, <renew> to extend the validity period of an object,
   <transfer> to manage object sponsorship changes, and <update> to
   change information associated with an object.




Gould, et al.            Expires April 25, 2019                [Page 35]


Internet-Draft                  registry                    October 2018


3.2.1.  EPP <create> Command

   The EPP <create> command provides a transform operation that allows a
   client to create a zone object.  In addition to the standard EPP
   command elements, the <create> command MUST contain a
   <registry:create> element that identifies the registry namespace.
   The <registry:create> element contains the following child elements:

   <registry:zone>:  Element that contains the full set of attributes
       for the zone to create, as defined in Section 2.5.

   Example <create> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   C:  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   C:  <command>
   C:    <create>
   C:      <registry:create
   C:        xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2">
   C:        <registry:zone>
   C:          <registry:name>EXAMPLE</registry:name>
   C:          ...
   C:        </registry:zone>
   C:      </registry:create>
   C:    </create>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When a <create> command has been processed successfully, the EPP
   <resData> element MUST contain a child <registry:creData> element
   that identifies the registry namespace.  The <registry:creData>
   element contains the following child elements:

   <registry:name>:  element that contains the fully qualified name of
       the zone object, as described in Section 2.1.
   <registry:crDate>:  element that contains the date and time of zone
       object creation.












Gould, et al.            Expires April 25, 2019                [Page 36]


Internet-Draft                  registry                    October 2018


   Example <create> response:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <registry:creData
   S:        xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2">
   S:        <registry:name>EXAMPLE</registry:name>
   S:        <registry:crDate>2012-10-30T22:00:00.0Z
   S:        </registry:crDate>
   S:      </registry:creData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if a <create> command can not
   be processed for any reason.

3.2.2.  EPP <delete> Command

   The EPP <delete> command provides a transform operation that allows a
   client to delete a zone object.  In addition to the standard EPP
   command elements, the <delete> command MUST contain a
   <registry:delete> element that identifies the registry namespace.
   The <registry:delete> element contains the following child elements:

   <registry:name>:  element that contains the fully qualified name of
       the zone object to be deleted, as described in Section 2.1.















Gould, et al.            Expires April 25, 2019                [Page 37]


Internet-Draft                  registry                    October 2018


   Example <delete> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <delete>
   C:      <registry:delete
   C:        xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2">
   C:        <registry:name>EXAMPLE</registry:name>
   C:      </registry:delete>
   C:    </delete>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When a <delete> zone has been processed successfully, a server MUST
   respond with an EPP response with no <resData> element.

   Example <delete> response:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if a <delete> command can not
   be processed for any reason.

3.2.3.  EPP <renew> Command

   Renew semantics do not directly apply to zone objects, so there is no
   mapping defined for the EPP <renew> command.

3.2.4.  EPP <transfer> Command

   Transfer semantics do not directly apply to zone objects, so there is
   no mapping defined for the EPP <transfer> command.






Gould, et al.            Expires April 25, 2019                [Page 38]


Internet-Draft                  registry                    October 2018


3.2.5.  EPP <update> Command

   The EPP <update> command provides a transform operation that allows a
   client to modify the attributes of a zone object.  In addition to the
   standard EPP command elements, the <update> command MUST contain a
   <registry:update> element that identifies the registry namespace.
   The <registry:update> element contains the following child elements:

   <registry:zone>:  One or more elements that contain the full set of
       attributes for the zones as defined in Section 2.5.  The update
       completely replaces the prior version of the zone.

   Example <update> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <update>
   C:      <registry:update
   C:        xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2">
   C:        <registry:zone>
   C:          <registry:name>EXAMPLE</registry:name>
   C:          ...
   C:        </registry:zone>
   C:      </registry:update>
   C:    </update>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When an <update> command has been processed successfully, a server
   MUST respond with an EPP response with no <resData> element.

   Example <update> command:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>




Gould, et al.            Expires April 25, 2019                [Page 39]


Internet-Draft                  registry                    October 2018


   An EPP error response MUST be returned if an <update> command can not
   be processed for any reason.

4.  Formal Syntax

   One schema is presented here that is the EPP Registry Mapping Schema.

   The formal syntax presented here is a complete schema representation
   of the object mapping suitable for automated validation of EPP XML
   instances.  The BEGIN and END tags are not part of the schema; they
   are used to note the beginning and ending of the schema for URI
   registration purposes.

4.1.  Registry Mapping Schema

   BEGIN
   <?xml version="1.0" encoding="UTF-8"?>
   <schema
     xmlns:registry="urn:ietf:params:xml:ns:epp:registry-0.2"
     xmlns:epp="urn:ietf:params:xml:ns:epp-1.0"
     xmlns:eppcom="urn:ietf:params:xml:ns:eppcom-1.0"
     xmlns="http://www.w3.org/2001/XMLSchema"
     targetNamespace="urn:ietf:params:xml:ns:epp:registry-0.2"
     elementFormDefault="qualified"
   >
     <!--
       Import common element types.
     -->
     <import namespace="urn:ietf:params:xml:ns:eppcom-1.0"/>
     <import namespace="urn:ietf:params:xml:ns:epp-1.0"/>

     <annotation>
       <documentation>
         Extensible Provisioning Protocol v1.0
         Registry
         Mapping Schema.
       </documentation>
     </annotation>
     <!--
       Child elements found in EPP commands.
     -->
     <element
       name="check"
       type="registry:mNameType"/>
     <element
       name="create"
       type="registry:createType"/>
     <element



Gould, et al.            Expires April 25, 2019                [Page 40]


Internet-Draft                  registry                    October 2018


       name="delete"
       type="registry:sNameType"/>
     <element
       name="info"
       type="registry:infoType"/>
     <element
       name="update"
       type="registry:updateType"/>
     <!--
       Child elements of the <check> command.
     -->
     <complexType name="mNameType">
       <sequence>
         <element
           name="name"
           type="registry:zoneNameType"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <!--
       Child elements of the <delete> command.
     -->
     <complexType name="sNameType">
       <sequence>
         <element
           name="name"
           type="registry:zoneNameType"/>
       </sequence>
     </complexType>
     <!--
       Child elements of the <create> command.
     -->
     <complexType name="createType">
       <sequence>
         <element
           name="zone"
           type="registry:zoneType"/>
       </sequence>
     </complexType>
     <complexType name="updateType">
       <sequence>
         <element
           name="zone"
           type="registry:zoneType"/>
       </sequence>
     </complexType>
     <!--
       Child elements of the <info> command.



Gould, et al.            Expires April 25, 2019                [Page 41]


Internet-Draft                  registry                    October 2018


     -->
     <complexType name="infoType">
       <sequence>
         <choice>
           <element name="all">
             <complexType>
               <attribute
                 name="scope"
                 default="accessible">
                 <simpleType>
                   <restriction base="token">
                     <enumeration value="accessible"/>
                     <enumeration value="available"/>
                     <enumeration value="both"/>
                   </restriction>
                 </simpleType>
               </attribute>
             </complexType>
           </element>
           <element
             name="name"
             type="registry:zoneNameType"/>
           <element name="system">
             <complexType/>
           </element>
         </choice>
       </sequence>
     </complexType>

     <!--
       Child response elements.
     -->
     <element
       name="chkData"
       type="registry:chkDataType"/>
     <element
       name="creData"
       type="registry:creDataType"/>
     <element
       name="infData"
       type="registry:infDataType"/>

     <!--
       <create> response elements.
     -->
     <complexType name="creDataType">
       <sequence>
         <element



Gould, et al.            Expires April 25, 2019                [Page 42]


Internet-Draft                  registry                    October 2018


           name="name"
           type="registry:zoneNameType"/>
         <element
           name="crDate"
           type="dateTime"/>
       </sequence>
     </complexType>
     <!--
       <check> response elements.
     -->
     <complexType name="chkDataType">
       <sequence>
         <element
           name="cd"
           type="registry:checkType"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <complexType name="checkType">
       <sequence>
         <element
           name="name"
           type="registry:checkNameType"/>
         <element
           name="reason"
           type="eppcom:reasonType"
           minOccurs="0"/>
       </sequence>
     </complexType>
     <complexType name="checkNameType">
       <simpleContent>
         <extension base="registry:zoneNameType">
           <attribute
             name="avail"
             type="boolean"
             use="required"/>
         </extension>
       </simpleContent>
     </complexType>
     <!--
       <info> response elements.
     -->
     <complexType name="infDataType">
       <choice>
         <element
           name="zoneList"
           type="registry:zoneListType"/>
         <element



Gould, et al.            Expires April 25, 2019                [Page 43]


Internet-Draft                  registry                    October 2018


           name="zone"
           type="registry:zoneInfDataType"/>
         <element
           name="system"
           type="registry:systemType"/>
       </choice>
     </complexType>
     <complexType name="zoneListType">
       <sequence>
         <element
           name="zone"
           type="registry:zoneSummaryType"
           minOccurs="0"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <complexType name="zoneSummaryType">
       <sequence>
         <element
           name="name"
           type="registry:zoneNameType"/>
         <element
           name="crDate"
           type="dateTime"/>
         <element
           name="upDate"
           type="dateTime"
           minOccurs="0"/>
       </sequence>
       <attribute
         name="accessible"
         type="boolean"
         default="true"/>
     </complexType>
     <complexType name="zoneType">
       <sequence>
         <element
           name="name"
           type="registry:zoneNameType"/>
         <element
           name="group"
           type="token"
           minOccurs="0"/>
         <element
           name="services"
           type="registry:servicesType"
           minOccurs="0"/>
         <element



Gould, et al.            Expires April 25, 2019                [Page 44]


Internet-Draft                  registry                    October 2018


           name="crID"
           type="eppcom:clIDType"
           minOccurs="0"/>
         <element
           name="crDate"
           type="dateTime"
           minOccurs="0"/>
         <element
           name="upID"
           type="eppcom:clIDType"
           minOccurs="0"/>
         <element
           name="upDate"
           type="dateTime"
           minOccurs="0"/>
         <element
           name="unsupportedData"
           type="registry:unsupportedDataType"
           minOccurs="0"/>
         <element
           name="batch"
           type="registry:batchType"
           minOccurs="0"/>
         <element
           name="system"
           type="registry:zoneSystemType"
           minOccurs="0"/>
         <element
           name="domain"
           type="registry:domainType"/>
         <element
           name="host"
           type="registry:hostType"/>
         <element
           name="contact"
           type="registry:contactType"
           minOccurs="0"/>
       </sequence>
     </complexType>
     <complexType name="zoneInfDataType">
       <complexContent>
         <extension base="registry:zoneType">
           <attribute
             name="accessible"
             type="boolean"
             default="true"/>
         </extension>
       </complexContent>



Gould, et al.            Expires April 25, 2019                [Page 45]


Internet-Draft                  registry                    October 2018


     </complexType>
     <complexType name="fieldsType">
       <sequence>
         <element
           name="field"
           type="token"
           maxOccurs="unbounded"/>
       </sequence>
       <attribute
         name="type"
         use="required"
       >
         <simpleType>
           <restriction base="token">
             <enumeration value="shared"/>
             <enumeration value="sync"/>
           </restriction>
         </simpleType>
       </attribute>
     </complexType>
     <complexType name="servicesType">
       <sequence>
         <element
           name="objURI"
           type="registry:uriType"
           maxOccurs="unbounded"/>
         <element
           name="svcExtension"
           type="registry:svcExtensionType"
           minOccurs="0"/>
       </sequence>
     </complexType>
     <complexType name="svcExtensionType">
       <sequence>
         <element
           name="extURI"
           type="registry:uriType"
           minOccurs="0"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <complexType name="uriType">
       <simpleContent>
         <extension base="anyURI">
           <attribute
             name="required"
             type="boolean"
             use="required"/>



Gould, et al.            Expires April 25, 2019                [Page 46]


Internet-Draft                  registry                    October 2018


         </extension>
       </simpleContent>
     </complexType>
     <complexType name="reservedNamesType">
       <choice>
         <element
           name="reservedName"
           type="normalizedString"
           minOccurs="0"
           maxOccurs="unbounded"/>
         <element
           name="reservedNameURI"
           type="anyURI"
           minOccurs="0"/>
       </choice>
     </complexType>
     <complexType name="domainNameType">
       <sequence>
         <element
           name="minLength"
           type="unsignedShort"
           minOccurs="0"/>
         <element
           name="maxLength"
           type="unsignedShort"
           minOccurs="0"/>
         <element
           name="alphaNumStart"
           type="boolean"
           minOccurs="0"
           default="false"/>
         <element
           name="alphaNumEnd"
           type="boolean"
           minOccurs="0"
           default="false"/>
         <element
           name="aLabelSupported"
           type="boolean"
           minOccurs="0"
           default="true"/>
         <element
           name="uLabelSupported"
           type="boolean"
           minOccurs="0"
           default="false"/>
         <element
           name="nameRegex"



Gould, et al.            Expires April 25, 2019                [Page 47]


Internet-Draft                  registry                    October 2018


           type="registry:regexType"
           minOccurs="0"/>
         <element
           name="reservedNames"
           type="registry:reservedNamesType"
           minOccurs="0"/>
       </sequence>
       <attribute
         name="level"
         use="required"
       >
         <simpleType>
           <restriction base="unsignedShort">
             <minInclusive value="2"/>
           </restriction>
         </simpleType>
       </attribute>
     </complexType>
     <complexType name="regexType">
       <sequence>
         <element
           name="expression"
           type="string"/>
         <element
           name="description"
           minOccurs="0"
         >
           <complexType>
             <simpleContent>
               <extension base="normalizedString">
                 <attribute
                   name="lang"
                   type="language"
                   default="en"/>
               </extension>
             </simpleContent>
           </complexType>
         </element>
       </sequence>
     </complexType>
     <simpleType name="zoneFormType">
       <restriction base="token">
         <enumeration value="aLabel"/>
         <enumeration value="uLabel"/>
       </restriction>
     </simpleType>
     <complexType name="zoneNameType">
       <simpleContent>



Gould, et al.            Expires April 25, 2019                [Page 48]


Internet-Draft                  registry                    October 2018


         <extension base="eppcom:labelType">
           <attribute
             name="form"
             type="registry:zoneFormType"
             default="aLabel"/>
         </extension>
       </simpleContent>
     </complexType>
     <simpleType name="variantStrategyType">
       <restriction base="token">
         <enumeration value="blocked"/>
         <enumeration value="restricted"/>
         <enumeration value="open"/>
       </restriction>
     </simpleType>
     <complexType name="languageType">
       <sequence>
         <element
           name="table"
           type="anyURI"
           minOccurs="0"/>
         <element
           name="variantStrategy"
           type="registry:variantStrategyType"
           minOccurs="0"/>
       </sequence>
       <attribute
         name="code"
         type="language"
         use="required"/>
     </complexType>
     <complexType name="idnType">
       <sequence>
         <element
           name="idnVersion"
           type="token"
           minOccurs="0"/>
         <element
           name="idnaVersion"
           type="token"/>
         <element
           name="unicodeVersion"
           type="token"/>
         <element
           name="encoding"
           type="token"
           minOccurs="0"
           default="Punycode"/>



Gould, et al.            Expires April 25, 2019                [Page 49]


Internet-Draft                  registry                    October 2018


         <element
           name="commingleAllowed"
           type="boolean"
           minOccurs="0"
           default="false"/>
         <element
           name="language"
           type="registry:languageType"
           minOccurs="0"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <complexType name="dContactType">
       <complexContent>
         <extension base="registry:minMaxType">
           <attribute
             name="type"
             use="required"
           >
             <simpleType>
               <restriction base="token">
                 <enumeration value="admin"/>
                 <enumeration value="tech"/>
                 <enumeration value="billing"/>
                 <enumeration value="custom"/>
               </restriction>
             </simpleType>
           </attribute>
           <attribute
             name="name"
             type="token"/>
           <attribute
             name="description"
             type="token"/>
         </extension>
       </complexContent>
     </complexType>
     <complexType name="minMaxType">
       <sequence>
         <element
           name="min"
           type="unsignedShort"/>
         <element
           name="max"
           type="unsignedShort"
           minOccurs="0"/>
       </sequence>
     </complexType>



Gould, et al.            Expires April 25, 2019                [Page 50]


Internet-Draft                  registry                    October 2018


     <complexType name="minMaxPeriod">
       <sequence>
         <element
           name="min"
           type="registry:periodType"/>
         <element
           name="max"
           type="registry:periodType"/>
         <element
           name="default"
           type="registry:periodType"/>
       </sequence>
     </complexType>
     <complexType name="dPeriodType">
       <choice>
         <element
           name="length"
           type="registry:minMaxPeriod"/>
         <element name="serverDecided">
           <complexType/>
         </element>
       </choice>
       <attribute
         name="command"
         type="token"
         use="required"/>
     </complexType>
     <complexType name="gPeriodType">
       <simpleContent>
         <extension base="registry:periodType">
           <attribute
             name="command"
             type="token"
             use="required"/>
         </extension>
       </simpleContent>
     </complexType>
     <complexType name="periodType">
       <simpleContent>
         <extension base="unsignedShort">
           <attribute
             name="unit"
             type="registry:pUnitType"
             use="required"/>
         </extension>
       </simpleContent>
     </complexType>
     <simpleType name="pUnitType">



Gould, et al.            Expires April 25, 2019                [Page 51]


Internet-Draft                  registry                    October 2018


       <restriction base="token">
         <enumeration value="y"/>
         <enumeration value="m"/>
         <enumeration value="d"/>
         <enumeration value="h"/>
       </restriction>
     </simpleType>
     <simpleType name="exceedMaxExDateEnumType">
       <restriction base="token">
         <enumeration value="fail"/>
         <enumeration value="clip"/>
         <enumeration value="disableRenewal"/>
       </restriction>
     </simpleType>
     <complexType name="exceedMaxExDateType">
       <simpleContent>
         <extension base="registry:exceedMaxExDateEnumType">
           <attribute
             name="command"
             type="token"
             use="required"/>
         </extension>
       </simpleContent>
     </complexType>
     <complexType name="rgpType">
       <sequence>
         <element
           name="redemptionPeriod"
           type="registry:periodType"/>
         <element
           name="pendingRestore"
           type="registry:periodType"/>
         <element
           name="pendingDelete"
           type="registry:periodType"/>
       </sequence>
     </complexType>
     <complexType name="keyInterfaceType">
       <sequence>
         <element
           name="min"
           type="unsignedShort"/>
         <element
           name="max"
           type="unsignedShort"/>
         <element
           name="flags"
           type="unsignedShort"



Gould, et al.            Expires April 25, 2019                [Page 52]


Internet-Draft                  registry                    October 2018


           minOccurs="0"
           maxOccurs="unbounded"/>
         <element
           name="protocol"
           type="unsignedByte"
           minOccurs="0"
           maxOccurs="unbounded"/>
         <element
           name="alg"
           type="token"
           minOccurs="0"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <complexType name="dsInterfaceType">
     <sequence>
         <element
           name="min"
           type="unsignedShort"/>
         <element
           name="max"
           type="unsignedShort"/>
         <element
           name="alg"
           type="token"
           minOccurs="0"
           maxOccurs="unbounded"/>
         <element
           name="digestType"
           type="token"
           minOccurs="0"
           maxOccurs="unbounded"/>
     </sequence>
     </complexType>
     <complexType name="maxSigLifeType">
       <sequence>
         <element
           name="clientDefined"
           type="boolean"
           minOccurs="0"
           default="false"/>
         <element
           name="default"
           type="int"
           minOccurs="0"/>
         <element
           name="min"
           type="int"



Gould, et al.            Expires April 25, 2019                [Page 53]


Internet-Draft                  registry                    October 2018


           minOccurs="0"/>
         <element
           name="max"
           type="int"
           minOccurs="0"/>
       </sequence>
     </complexType>
     <complexType name="dnssecType">
       <sequence>
         <choice>
           <element
             name="dsDataInterface"
             type="registry:dsInterfaceType"/>
           <element
             name="keyDataInterface"
             type="registry:keyInterfaceType"/>
         </choice>
         <element
           name="maxSigLife"
           type="registry:maxSigLifeType"/>
         <element
           name="urgent"
           type="boolean"
           minOccurs="0"
           default="false"/>
       </sequence>
     </complexType>
     <complexType name="supportedStatusType">
       <sequence>
         <element
           name="status"
           type="token"
           minOccurs="1"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <complexType name="scheduleType">
       <simpleContent>
         <extension base="time">
           <attribute
             name="frequency"
             use="required"
           >
             <simpleType>
               <restriction base="token">
                 <enumeration value="daily"/>
                 <enumeration value="weekly"/>
                 <enumeration value="monthly"/>



Gould, et al.            Expires April 25, 2019                [Page 54]


Internet-Draft                  registry                    October 2018


               </restriction>
             </simpleType>
           </attribute>
           <attribute
             name="dayOfWeek"
           >
             <simpleType>
               <restriction base="byte">
                 <minInclusive value="0"/>
                 <maxInclusive value="6"/>
               </restriction>
             </simpleType>
           </attribute>
           <attribute
             name="dayOfMonth"
           >
             <simpleType>
               <restriction base="byte">
                 <minInclusive value="1"/>
                 <maxInclusive value="31"/>
               </restriction>
             </simpleType>
           </attribute>
           <attribute
             name="tz"
             type="token"/>
         </extension>
       </simpleContent>
     </complexType>
     <complexType name="batchJobType">
       <sequence>
         <element
           name="name"
           type="token"/>
         <element
           name="description"
           type="token"
           minOccurs="0"/>
         <!-- UNIX crontab job schedule format -->
         <element
           name="schedule"
           type="registry:scheduleType"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <!-- Information about the batch jobs -->
     <complexType name="batchType">
       <sequence>



Gould, et al.            Expires April 25, 2019                [Page 55]


Internet-Draft                  registry                    October 2018


         <element
           name="batchJob"
           type="registry:batchJobType"
           minOccurs="1"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <!--
       Information the TLDs that makeup the system, which is associated
       with the "perSystem" sharePolicy.
     -->
     <complexType name="zoneSystemType">
       <sequence>
         <element
           name="zone"
           type="registry:zoneNameType"
           minOccurs="1"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <simpleType name="expiryPolicyType">
       <restriction base="token">
         <enumeration value="autoRenew"/>
         <enumeration value="autoDelete"/>
         <enumeration value="autoExpire"/>
         <enumeration value="autoParked"/>
       </restriction>
     </simpleType>
     <complexType name="domainType">
       <sequence>
         <element
           name="domainName"
           type="registry:domainNameType"
           maxOccurs="unbounded"/>
         <element
           name="idn"
           type="registry:idnType"
           minOccurs="0"/>
         <element
           name="premiumSupport"
           type="boolean"
           minOccurs="0"
           default="false"/>
         <element
           name="contactsSupported"
           type="boolean"
           minOccurs="0"
           default="true"/>



Gould, et al.            Expires April 25, 2019                [Page 56]


Internet-Draft                  registry                    October 2018


         <element
           name="contact"
           type="registry:dContactType"
           minOccurs="0"
           maxOccurs="unbounded"/>
         <element
           name="ns"
           type="registry:minMaxType"/>
         <element
           name="childHost"
           type="registry:minMaxType"
           minOccurs="0"/>
         <element
           name="period"
           type="registry:dPeriodType"
           minOccurs="0"
           maxOccurs="unbounded"/>
         <element
           name="exceedMaxExDate"
           type="registry:exceedMaxExDateType"
           minOccurs="0"
           maxOccurs="unbounded"/>
         <element
           name="transferHoldPeriod"
           type="registry:periodType"/>
         <element
           name="gracePeriod"
           type="registry:gPeriodType"
           minOccurs="0"
           maxOccurs="unbounded"/>
         <element
           name="rgp"
           type="registry:rgpType"
           minOccurs="0"/>
         <element
           name="dnssec"
           type="registry:dnssecType"
           minOccurs="0"/>
         <element
           name="maxCheckDomain"
           type="unsignedShort"/>
         <element
           name="supportedStatus"
           type="registry:supportedStatusType"
           minOccurs="0"/>
         <element
           name="authInfoRegex"
           type="registry:regexType"



Gould, et al.            Expires April 25, 2019                [Page 57]


Internet-Draft                  registry                    October 2018


           minOccurs="0"/>
         <element
           name="expiryPolicy"
           type="registry:expiryPolicyType"
           minOccurs="0"
           default="autoRenew"/>
         <element
           name="nullAuthInfoSupported"
           type="boolean"
           minOccurs="0"
           default="false"/>
         <element
           name="hostModelSupported"
           default="hostObj"
           minOccurs="0">
           <simpleType>
             <restriction base="token">
               <enumeration value="hostObj"/>
               <enumeration value="hostAttr"/>
             </restriction>
           </simpleType>
         </element>
       </sequence>
     </complexType>
     <simpleType name="intHostSharePolicyType">
       <restriction base="token">
         <enumeration value="perZone"/>
         <enumeration value="perSystem"/>
       </restriction>
     </simpleType>
     <simpleType name="extHostSharePolicyType">
       <restriction base="token">
         <enumeration value="perRegistrar"/>
         <enumeration value="perZone"/>
         <enumeration value="perSystem"/>
       </restriction>
     </simpleType>
     <simpleType name="postalInfoTypeSupportType">
       <restriction base="token">
         <enumeration value="loc"/>
         <enumeration value="int"/>
         <enumeration value="locOrInt"/>
         <enumeration value="locAndInt"/>
         <enumeration value="intOptLoc"/>
         <enumeration value="locOptInt"/>
       </restriction>
     </simpleType>
     <complexType name="intHostPolicyType">



Gould, et al.            Expires April 25, 2019                [Page 58]


Internet-Draft                  registry                    October 2018


       <sequence>
         <element
           name="minIP"
           type="unsignedShort"/>
         <element
           name="maxIP"
           type="unsignedShort"/>
         <element
           name="sharePolicy"
           type="registry:intHostSharePolicyType"
           minOccurs="0"/>
         <element
           name="uniqueIpAddressesRequired"
           type="boolean"
           minOccurs="0"
           default="false"/>
        </sequence>
     </complexType>
     <complexType name="extHostPolicyType">
       <sequence>
         <element
           name="minIP"
           type="unsignedShort"/>
         <element
           name="maxIP"
           type="unsignedShort"/>
         <element
           name="sharePolicy"
           type="registry:extHostSharePolicyType"
           minOccurs="0"/>
         <element
           name="uniqueIpAddressesRequired"
           type="boolean"
           minOccurs="0"
           default="false"/>
       </sequence>
     </complexType>
     <complexType name="hostType">
       <sequence>
         <element
           name="internal"
           type="registry:intHostPolicyType"/>
         <element
           name="external"
           type="registry:extHostPolicyType"/>
         <element
           name="nameRegex"
           type="registry:regexType"



Gould, et al.            Expires April 25, 2019                [Page 59]


Internet-Draft                  registry                    October 2018


           minOccurs="0"/>
         <element
           name="maxCheckHost"
           type="unsignedShort"
           minOccurs="0"/>
         <element
           name="supportedStatus"
           type="registry:supportedStatusType"
           minOccurs="0"/>
         <element
           name="invalidIP"
           type="anyURI"
           minOccurs="0"
           maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <complexType name="minMaxLength">
       <sequence>
         <element
           name="minLength"
           type="unsignedShort"/>
         <element
           name="maxLength"
           type="unsignedShort"/>
       </sequence>
     </complexType>
     <simpleType name="contactSharePolicyType">
       <restriction base="token">
         <enumeration value="perZone"/>
         <enumeration value="perSystem"/>
       </restriction>
     </simpleType>
     <complexType name="streetType">
       <complexContent>
         <extension base="registry:minMaxLength">
           <sequence>
             <element
               name="minEntry"
               type="unsignedShort"/>
             <element
               name="maxEntry"
               type="unsignedShort"/>
           </sequence>
         </extension>
       </complexContent>
     </complexType>
     <complexType name="contactAddressType">
       <sequence>



Gould, et al.            Expires April 25, 2019                [Page 60]


Internet-Draft                  registry                    October 2018


         <element
           name="street"
           type="registry:streetType"/>
         <element
           name="city"
           type="registry:minMaxLength"/>
         <element
           name="sp"
           type="registry:minMaxLength"/>
         <element
           name="pc"
           type="registry:minMaxLength"/>
       </sequence>
     </complexType>
     <complexType name="postalType">
       <sequence>
         <element
           name="locCharRegex"
           type="registry:regexType"
           minOccurs="0"/>
         <element
           name="name"
           type="registry:minMaxLength"/>
         <element
           name="org"
           type="registry:minMaxLength"/>
         <element
           name="address"
           type="registry:contactAddressType"/>
         <element
           name="voiceRequired"
           type="boolean"
           minOccurs="0"
           default="false"/>
         <element
           name="voiceExt"
           type="registry:minMaxLength"
           minOccurs="0"/>
         <element
           name="faxExt"
           type="registry:minMaxLength"
           minOccurs="0"/>
         <element
           name="emailRegex"
           type="registry:regexType"
           minOccurs="0"/>
       </sequence>
     </complexType>



Gould, et al.            Expires April 25, 2019                [Page 61]


Internet-Draft                  registry                    October 2018


     <complexType name="contactType">
       <sequence>
         <element
           name="contactIdRegex"
           type="registry:regexType"
           minOccurs="0"/>
         <element
           name="contactIdPrefix"
           type="token"
           minOccurs="0"/>
         <element
           name="sharePolicy"
           type="registry:contactSharePolicyType"
           minOccurs="0"/>
         <element
           name="postalInfoTypeSupport"
           type="registry:postalInfoTypeSupportType"/>
         <element
           name="postalInfo"
           type="registry:postalType"/>
         <element
           name="maxCheckContact"
           type="unsignedShort"/>
         <element
           name="authInfoRegex"
           type="registry:regexType"
           minOccurs="0"/>
         <element
           name="clientDisclosureSupported"
           type="boolean"
           minOccurs="0"
           default="false"/>
         <element
           name="supportedStatus"
           type="registry:supportedStatusType"
           minOccurs="0"/>
         <element
           name="transferHoldPeriod"
           type="registry:periodType"
           minOccurs="0"/>
         <element
           name="privacyContactSupported"
           type="boolean"
           minOccurs="0"
           default="true"/>
         <element
           name="proxyContactSupported"
           type="boolean"



Gould, et al.            Expires April 25, 2019                [Page 62]


Internet-Draft                  registry                    October 2018


           minOccurs="0"
           default="true"/>
       </sequence>
     </complexType>
     <complexType name="transLimitType">
       <simpleContent>
         <extension base="int">
           <attribute
             name="perMs"
             type="int"
             use="required"/>
         </extension>
       </simpleContent>
     </complexType>
     <complexType name="systemType">
       <sequence>
         <element
           name="maxConnections"
           type="int"
           minOccurs="0"/>
         <element
           name="idleTimeout"
           type="int"
           minOccurs="0"/>
         <element
           name="absoluteTimeout"
           type="int"
           minOccurs="0"/>
         <element
           name="commandTimeout"
           type="int"
           minOccurs="0"/>
         <element
           name="transLimit"
           type="registry:transLimitType"
           minOccurs="0"/>
       </sequence>
     </complexType>
     <simpleType name="unsupportedDataType">
       <restriction base="token">
         <enumeration value="fail"/>
         <enumeration value="ignore"/>
       </restriction>
     </simpleType>
   </schema>
   END





Gould, et al.            Expires April 25, 2019                [Page 63]


Internet-Draft                  registry                    October 2018


5.  IANA Considerations

5.1.  XML Namespace

   This document uses URNs to describe XML namespaces and XML schemas
   conforming to a registry mechanism described in [RFC3688].

   Registration request for the registry namespace:

      URI: urn:ietf:params:xml:ns:epp:registry-0.2
      Registrant Contact: IESG
      XML: None.  Namespace URIs do not represent an XML specification.

   Registration request for the registry XML schema:

      URI: urn:ietf:params:xml:schema:epp:registry-0.2
      Registrant Contact: IESG
      XML: See the "Formal Syntax" section of this document.

5.2.  EPP Extension Registry

   The EPP extension described in this document should be registered by
   the IANA in the EPP Extension Registry described in [RFC7451].  The
   details of the registration are as follows:

   Name of Extension: "Registry Mapping for the Extensible Provisioning
   Protocol (EPP)"

   Document status: Standards Track

   Reference: (insert reference to RFC version of this document)

   Registrant Name and Email Address: IESG, <iesg@ietf.org>

   TLDs: Any

   IPR Disclosure: TBD

   Status: Active

   Notes: None

6.  Implementation Status

   Note to RFC Editor: Please remove this section and the reference to
   RFC 7942 [RFC7942] before publication.





Gould, et al.            Expires April 25, 2019                [Page 64]


Internet-Draft                  registry                    October 2018


   This section records the status of known implementations of the
   protocol defined by this specification at the time of posting of this
   Internet-Draft, and is based on a proposal described in RFC 7942
   [RFC7942].  The description of implementations in this section is
   intended to assist the IETF in its decision processes in progressing
   drafts to RFCs.  Please note that the listing of any individual
   implementation here does not imply endorsement by the IETF.
   Furthermore, no effort has been spent to verify the information
   presented here that was supplied by IETF contributors.  This is not
   intended as, and must not be construed to be, a catalog of available
   implementations or their features.  Readers are advised to note that
   other implementations may exist.

   According to RFC 7942 [RFC7942], "this will allow reviewers and
   working groups to assign due consideration to documents that have the
   benefit of running code, which may serve as evidence of valuable
   experimentation and feedback that have made the implemented protocols
   more mature.  It is up to the individual working groups to use this
   information as they see fit".

6.1.  Verisign EPP SDK

   Organization: Verisign Inc.

   Name: Verisign EPP SDK

   Description: The Verisign EPP SDK includes both a full client
   implementation and a full server stub implementation of draft-gould-
   carney-regext-registry.

   Level of maturity: Development

   Coverage: All aspects of the protocol are implemented.

   Licensing: GNU Lesser General Public License

   Contact: jgould@verisign.com

   URL: https://www.verisign.com/en_US/channel-resources/domain-
   registry-products/epp-sdks

7.  Security Considerations

   The mapping extensions described in this document do not provide any
   security services beyond those described by EPP [RFC5730] and
   protocol layers used by EPP.  The security considerations described
   in these other specifications apply to this specification as well.




Gould, et al.            Expires April 25, 2019                [Page 65]


Internet-Draft                  registry                    October 2018


8.  Acknowledgements

   The authors wish to thank the following persons for their feedback
   and suggestions:

   o  Mario Loffredo, Patrick Mevzek

9.  References

9.1.  Normative References

   [RFC0952]  Harrenstien, K., Stahl, M., and E. Feinler, "DoD Internet
              host table specification", RFC 952, DOI 10.17487/RFC0952,
              October 1985, <https://www.rfc-editor.org/info/rfc952>.

   [RFC1123]  Braden, R., Ed., "Requirements for Internet Hosts -
              Application and Support", STD 3, RFC 1123,
              DOI 10.17487/RFC1123, October 1989, <https://www.rfc-
              editor.org/info/rfc1123>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997, <https://www.rfc-
              editor.org/info/rfc2119>.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004, <https://www.rfc-
              editor.org/info/rfc3688>.

   [RFC4034]  Arends, R., Austein, R., Larson, M., Massey, D., and S.
              Rose, "Resource Records for the DNS Security Extensions",
              RFC 4034, DOI 10.17487/RFC4034, March 2005,
              <https://www.rfc-editor.org/info/rfc4034>.

   [RFC5730]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              STD 69, RFC 5730, DOI 10.17487/RFC5730, August 2009,
              <https://www.rfc-editor.org/info/rfc5730>.

   [RFC5731]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)
              Domain Name Mapping", STD 69, RFC 5731,
              DOI 10.17487/RFC5731, August 2009, <https://www.rfc-
              editor.org/info/rfc5731>.

   [RFC5732]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)
              Host Mapping", STD 69, RFC 5732, DOI 10.17487/RFC5732,
              August 2009, <https://www.rfc-editor.org/info/rfc5732>.





Gould, et al.            Expires April 25, 2019                [Page 66]


Internet-Draft                  registry                    October 2018


   [RFC5733]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)
              Contact Mapping", STD 69, RFC 5733, DOI 10.17487/RFC5733,
              August 2009, <https://www.rfc-editor.org/info/rfc5733>.

   [RFC5890]  Klensin, J., "Internationalized Domain Names for
              Applications (IDNA): Definitions and Document Framework",
              RFC 5890, DOI 10.17487/RFC5890, August 2010,
              <https://www.rfc-editor.org/info/rfc5890>.

   [RFC5910]  Gould, J. and S. Hollenbeck, "Domain Name System (DNS)
              Security Extensions Mapping for the Extensible
              Provisioning Protocol (EPP)", RFC 5910,
              DOI 10.17487/RFC5910, May 2010, <https://www.rfc-
              editor.org/info/rfc5910>.

   [RFC7451]  Hollenbeck, S., "Extension Registry for the Extensible
              Provisioning Protocol", RFC 7451, DOI 10.17487/RFC7451,
              February 2015, <https://www.rfc-editor.org/info/rfc7451>.

   [RFC7942]  Sheffer, Y. and A. Farrel, "Improving Awareness of Running
              Code: The Implementation Status Section", BCP 205,
              RFC 7942, DOI 10.17487/RFC7942, July 2016,
              <https://www.rfc-editor.org/info/rfc7942>.

9.2.  Informative References

   [pcre]     Hazel, P., "Perl-compatible Regular Expressions (PCRE)",
              October 2016, <https://www.pcre.org/original/doc/html/
              pcrepattern.html>.

9.3.  URIs

   [1] http://www.w3.org/TR/2004/REC-xmlschema-2-20041028/

Appendix A.  Change History

A.1.  Change from 00 to 01

   1.  Added missing description of the "perRegistrar" value for the
       <registry:external> <registry:sharePolicy> element.
   2.  Revised the description of <registry:emailRegex> to be a single
       optional element instead of an optional list of elements to match
       the definition in the XML schema.








Gould, et al.            Expires April 25, 2019                [Page 67]


Internet-Draft                  registry                    October 2018


A.2.  Change from 01 to 02

   1.  Removed the unneeded zoneMemberType from the XML schema.
   2.  Added reference to the Zone Name section for the <registry:name>
       elements, since they use the XML schema zoneFormType that
       supports the "form" attribute with the default value of "aLabel".
   3.  Made the zoneType crDate element optional to support sending the
       zone on a create command without the crDate being set by the
       client.
   4.  Updated the Implementation Status section to include the leading
       paragraphs and to include the "Verisign EPP SDK" sub-section.

A.3.  Change from 02 to 03

   1.  Changed the XML namespace from urn:ietf:params:xml:ns:registry-
       0.1 to urn:ietf:params:xml:ns:epp:registry-0.1, and changed the
       XML schema registration from urn:ietf:params:xml:ns:registry-0.1
       to urn:ietf:params:xml:schema:epp:registry-0.1 based on a request
       from IANA with draft-ietf-regext-allocation-token.

A.4.  Change from 03 to 04

   1.   Added the optional <registry:contactIdPrefix> element to support
        a client-specific prefix for the <contact:id> elements in
        [RFC5733], based on feedback from Patrick Mevzek.
   2.   Added the optional <registry:unsupportedData> element to define
        what the server does when unsupported data is sent by the
        client, based on feedback from Patrick Mevzek.
   3.   Added the <registry:nullAuthInfoSupported> element to indicate
        whether the <domain:null> element of [RFC5731] is supported,
        based on feedback from Patrick Mevzek.
   4.   Added support for the <registry:flags> and the
        <registry:protocol> elements under the
        <registry:keyDataInterface> element to define the supported set
        of key data interface flags and protocols, based on feedback
        from Patrick Mevzek.
   5.   Updated the Introduction sentence "It is up to server policy to
        define what clients are authorized to execute which commands on
        which registry zones" to "It is up to server policy what
        commands are supported and to define the clients that are
        authorized to execute the commands for the registry zones.  The
        server MUST return a 2101 error response for an unimplemented
        command and MUST return a 2201 error response for an
        unauthorized command.", based on feedback from Mario Loffredo.
   6.   Added two additional <registry:postalInfoTypeSupport> element
        values, which include "intOptLoc" and "locOptInt", based on
        feedback from Patrick Mevzek.




Gould, et al.            Expires April 25, 2019                [Page 68]


Internet-Draft                  registry                    October 2018


   7.   Added "that SHOULD match the statuses" to the descriptions of
        the <registry:supportedStatus> elements under the
        <registry:domain> element, the <registry:host> element, and the
        <registry:contact> element, based on feedback from Mario
        Loffredo.
   8.   Added "or transferred" to the description of the
        <registry:expiryPolicy> element "autoRenew" value, based on
        feedback from Mario Laffredo.
   9.   Added support for an optional list of <registry:invalidIP>
        elements, under the <registry:host> element, to reference a list
        of externally defined invalid IP addresses URIs, based on
        feedback from Patrick Mevzek.
   10.  Changed all references of urn:ietf:params:xml:ns:epp:registry-
        0.1 to urn:ietf:params:xml:ns:epp:registry-0.2 in the draft.
   11.  Added a "Regular Expressions" section that describes the regular
        expression syntax used in the draft, which is Perl-compatible
        Regular Expression (PCRE).  The elements that use regular
        expression values reference the new "Regular Expressions"
        section.  Referencing the expected regular expression syntax to
        use is based on feedback from Patrick Mevzek.
   12.  Added support for the <registry:locCharRegex> element to define
        the acceptable set of characters for the "loc" postal
        information elements, based on feedback from Patrick Mevzek.
   13.  Updated to make the regular expression elements follow a
        consistent naming convention and cardinality.  Changed
        <registry:regex> to <registry:nameRegex> under the
        <registry:domainName> element, and changed to a single element.
        Changed the <registry:nameRegex> under the <registry:host>
        element to a single element.
   14.  Added support for the host attribute model in RFC 5731 by adding
        the <registry:hostModelSupported> element under the
        <registry:domain> element, making the <registry:maxCheckHost>
        element optional, and making the <registry:childHost> element
        optional, based on feedback from Mario Loffredo.
   15.  Added the <registry:exceedMaxExDate> element under the
        <registry:domain> element to support returning the server policy
        when the client exceeds the maximum expiration date on a per
        renewal command basis, based on feedback from Patrick Mevzek.
   16.  Re-defined the <registry:schedule> element to use a simplified
        XML definition in place of a crontab definition, and added
        support for one or more <registry:schedule> elements per batch
        job.  The <registry:schedule> element supports multiple
        frequencies (daily, weekly, monthly), both local and UTC time
        zones, and a time using the XML schema "time" type.  This change
        is based on feedback from Patrick Mevzek.
   17.  Made the zone names more consistent by using EXAMPLE and
        EXAMPLE#.




Gould, et al.            Expires April 25, 2019                [Page 69]


Internet-Draft                  registry                    October 2018


   18.  Added support for the <registry:all> element "scope" attribute
        and the <registry:zone> element "accessible" boolean attribute,
        to enable the client to explicitly specify which zones are of
        interest (accessible, available, or both) in the info command
        and to enable the server to indicate in the info response
        whether a zone is accessible or not.

Authors' Addresses

   James Gould
   VeriSign, Inc.
   12061 Bluemont Way
   Reston, VA  20190
   US

   Email: jgould@verisign.com
   URI:   http://www.verisigninc.com


   Lin Jia
   VeriSign, Inc.
   12061 Bluemont Way
   Reston, VA  20190
   US

   Email: ljia@verisign.com
   URI:   http://www.verisigninc.com


   Roger Carney
   GoDaddy Inc.
   14455 N. Hayden Rd. #219
   Scottsdale, AZ  85260
   US

   Email: rcarney@godaddy.com
   URI:   http://www.godaddy.com


   Jody Kolker
   GoDaddy Inc.
   14455 N. Hayden Rd. #219
   Scottsdale, AZ  85260
   US

   Email: jkolker@godaddy.com
   URI:   http://www.godaddy.com




Gould, et al.            Expires April 25, 2019                [Page 70]