Network Working Group                                           Y. Fu
Internet Draft                                                S. Jiang
Intended status: Standards Track                                 B.Liu
Expires: July 18, 2013                    Huawei Technologies Co., Ltd
                                                      January 17, 2013

                 Definitions of Managed Objects for 4rd
                      draft-fu-softwire-4rd-mib-02


Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF). Note that other groups may also distribute working
   documents as Internet-Drafts. The list of current Internet-Drafts is
   at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time. It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on July 18, 2013.

Copyright Notice

   Copyright (c) 2013 IETF Trust and the persons identified as the
   document authors. All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document. Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document. Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.



Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it defines managed objects for 4rd.




Fu, et al.              Expires July 18, 2013                 [Page 1]


Internet-Draft    draft-fu-softwire-4rd-mib-02.txt        January 2013




Table of Contents

   1. Introduction ................................................. 3
   2. The Internet-Standard Management Framework ................... 3
   3. Terminology .................................................. 3
   4. Structure of the MIB Module .................................. 3
      4.1. The fourRdRule Subtree .................................. 3
      4.2. The fourRdConformance Subtree ........................... 4
   5. MIB modules required for IMPORTS ............................. 4
   6. Definitions .................................................. 4
   7. IANA Considerations .......................................... 8
   8. Security Considerations ...................................... 9
   9. References ................................................... 9
      9.1. Normative References .................................... 9
      9.2. Informative References ................................. 10
   10. Change Log [RFC Editor please remove] ...................... 10
   Author's Addresses ............................................. 11





























Fu, et al.              Expires July 18, 2013                 [Page 2]


Internet-Draft    draft-fu-softwire-4rd-mib-02.txt        January 2013



1. Introduction

   4rd [I-D. draft-ietf-softwire-4rd] is a stateless mechanism for
   running IPv4 over IPv6-only infrastructure. It provides both IPv4 and
   IPv6 connectivity services simultaneously during the IPv4/IPv6 co-
   existing period.

   This document defines a portion of the Management Information Base
   (MIB) for using with network management protocols in the Internet
   community. This MIB module may be used for monitoring the devices in
   the 4rd scenario.

2. The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the MIB. MIB objects are generally accessed through the Simple
   Network Management Protocol (SNMP).

   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in
   [RFC2578], [RFC2579] and [RFC2580].

3. Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

4. Structure of the MIB Module

   The 4rd MIB provides a way to configure and manage the devices in 4rd
   scenario through SNMP.

   4rd MIB is configurable on a per-interface basis. It depends on
   several parts of the IF-MIB [RFC2863].

     4.1. The fourRdRule Subtree

   The fourRdRule subtree describes managed objects used for managing
   the multiple mapping rules in the 4rd scenario.



Fu, et al.              Expires July 18, 2013                 [Page 3]


Internet-Draft    draft-fu-softwire-4rd-mib-02.txt        January 2013


     4.2. The fourRdConformance Subtree

   The Subtree provides conformance information of MIB objects.

5. MIB modules required for IMPORTS

   This MIB module IMPORTs objects from  [RFC2580], [RFC2578], [RFC2863],
   [RFC4001], [RFC3411].

6. Definitions

      FourRd-MIB DEFINITIONS  ::=  BEGIN

      IMPORTS
         MODULE-IDENTITY, OBJECT-TYPE, mib-2, transmission,
         Gauge32, Integer32, Counter64
            FROM SNMPv2-SMI

         RowStatus, StorageType
            FROM SNMPv2-TC

         InetAddress, InetAddressIPv6,
         InetPortNumber, InetAddressPrefixLength
            FROM INET-ADDRESS-MIB;

      fourRdMIB MODULE-IDENTITY
      LAST-UPDATED "201301170000Z" -- January 17, 2013
      ORGANIZATION "IETF Softwire Working Group"
      CONTACT-INFO
         "Yu Fu
          Huawei Technologies Co., Ltd
          Huawei Building, 156 Beiqing Rd., Hai-Dian District
          Beijing, P.R. China 100095
          EMail: eleven.fuyu@huawei.com

          Sheng Jiang
          Huawei Technologies Co., Ltd
          Huawei Building, 156 Beiqing Rd., Hai-Dian District
          Beijing, P.R. China 100095
          EMail: jiangsheng@huawei.com








Fu, et al.              Expires July 18, 2013                 [Page 4]


Internet-Draft    draft-fu-softwire-4rd-mib-02.txt        January 2013


          Bing Liu
          Huawei Technologies Co., Ltd
          Huawei Building, 156 Beiqing Rd., Hai-Dian District
          Beijing, P.R. China 100095
          EMail: leo.liubing@huawei.com"

      DESCRIPTION
         "The MIB module is defined for management of object in the
         4rd scenario."
         ::=  {  transmission xxx  }  --xxx to be replaced with correct
         value

       fourRdRule   OBJECT IDENTIFIER
         ::=  { fourRdMIB 1 }

       --Conformance
       fourRdConformance   OBJECT IDENTIFIER
         ::=  { fourRdMIB 2 }

      fourRdRuleTable OBJECT-TYPE
         SYNTAX     SEQUENCE OF fourRdRuleEntry
         MAX-ACCESS  not-accessible
         STATUS     current
         DESCRIPTION
            "The (conceptual) table containing rule information of
             specific mapping rule. It can also be used for row
             creation."
          ::=  { fourRdRule 1 }

      fourRdRuleEntry OBJECT-TYPE
         SYNTAX     fourRdRuleEntry
         MAX-ACCESS  not-accessible
         STATUS     current
         DESCRIPTION
            "Each entry in this table contains the information on a
             particular mapping rule."
             INDEX   { fourRdRuleID}
         ::=  { fourRdRuleTable 1 }

      fourRdRuleEntry  ::=
         SEQUENCE {
            fourRdRuleID                  Integer32,
            fourRdRuleIPv6Prefix          InetAddressIPv6,
            fourRdRuleIPv6PrefixLen       InetAddressPrefixLength,
            fourRdRuleIPv4Prefix          InetAddress,
            fourRdRuleIPv4PrefixLen       InetAddressPrefixLength,
            fourRdRuleStartPort           InetPortNumber,


Fu, et al.              Expires July 18, 2013                 [Page 5]


Internet-Draft    draft-fu-softwire-4rd-mib-02.txt        January 2013


            fourRdRuleEndPort             InetPortNumber,
            fourRdRuleEALen               Integer32,
            fourRdRuleStatus              RowStatus,
            fourRdRuleStorageType         StorageType   }

     fourRdRuleID OBJECT-TYPE
          SYNTAX Integer32 (1..2147483647)
          MAX-ACCESS read-write
          STATUS current
          DESCRIPTION
             "An identifier used to distinguish the multiple mapping
              rule which is unique with each CE in the same BR."
          ::= { fourRdRuleEntry 1 }

      fourRdRuleIPv6Prefix OBJECT-TYPE
          SYNTAX     InetAddressIPv6
          MAX-ACCESS read-write
          STATUS     current
          DESCRIPTION
             "The IPv6 prefix defined in mapping rule which will be
              assigned to CE ."
          ::= { fourRdRuleEntry 2 }

      fourRdRuleIPv6PrefixLen OBJECT-TYPE
          SYNTAX     InetAddressPrefixLength
          MAX-ACCESS read-write
          STATUS     current
          DESCRIPTION
             "The length of the IPv6 prefix defined in the mapping rule.
              As a parameter for mapping rule, it will be also assigned
              to CE."
          ::= { fourRdRuleEntry 3 }

      fourRdRuleIPv4Prefix OBJECT-TYPE
          SYNTAX     InetAddress
          MAX-ACCESS read-write
          STATUS     current
          DESCRIPTION
             " The IPv4 prefix defined in mapping rule which will be
              assigned to CE."
          ::= { fourRdRuleEntry 4 }

      fourRdRuleIPv4PrefixLen OBJECT-TYPE
          SYNTAX     InetAddressPrefixLength
          MAX-ACCESS read-write
          STATUS     current
          DESCRIPTION


Fu, et al.              Expires July 18, 2013                 [Page 6]


Internet-Draft    draft-fu-softwire-4rd-mib-02.txt        January 2013


             "The length of the IPv4 prefix defined in the mapping
              rule. As a parameter for mapping rule, it will be also
              assigned to CE."
          ::= { fourRdRuleEntry 5 }

      fourRdRuleStartPort OBJECT-TYPE
          SYNTAX     InetPortNumber
          MAX-ACCESS read-write
          STATUS     current
          DESCRIPTION
             "The start port number of the port range derived
              from the mapping rule which will be assigned to CE."
          ::= { fourRdRuleEntry 6 }

       fourRdRuleEndPort OBJECT-TYPE
          SYNTAX     InetPortNumber
          MAX-ACCESS read-write
          STATUS     current
          DESCRIPTION
             " The end port number of the port range derived
              from the mapping rule which will be assigned to CE."
          ::= { fourRdRuleEntry 7 }

      fourRdRuleEALen OBJECT-TYPE
          SYNTAX     Integer32
          MAX-ACCESS read-write
          STATUS     current
          DESCRIPTION
             "The length of the Embedded-Address (EA) defined in
              mapping rule which will be assigned to CE."
          ::= { fourRdRuleEntry 8 }

      fourRdRuleStatus OBJECT-TYPE
          SYNTAX     RowStatus
          MAX-ACCESS read-create
          STATUS     current
          DESCRIPTION
             "The status of this row, by which new entries may be
              created, or old entries deleted from this table.
          ::= { fourRdRuleEntry 9 }

      fourRdRuleStorageType OBJECT-TYPE
          SYNTAX     StorageType
          MAX-ACCESS read-create
          STATUS     current
          DESCRIPTION
             "The storage type of this row. If the row is


Fu, et al.              Expires July 18, 2013                 [Page 7]


Internet-Draft    draft-fu-softwire-4rd-mib-02.txt        January 2013


              permanent(4), no objects in the row need be
              writable."
          ::= { fourRdRuleEntry 10 }

       --Module Conformance statement

      fourRdCompliances OBJECT IDENTIFIER ::= { fourRdConformance 1 }

      fourRdCompliance MODULE-COMPLIANCE
         STATUS current
         DESCRIPTION
            "Description."
         MODULE -- this module
             MANDATORY-GROUPS { fourRdRuleGroup }
        ::= { fourRdCompliances 1 }

      fourRdGroups OBJECT IDENTIFIER ::= { fourRdConformance 2 }

      fourRdRuleGroup OBJECT-GROUP
         OBJECTS { fourRdRuleID,
                 fourRdRuleIPv6Prefix,
                 fourRdRuleIPv6PrefixLen,
                 fourRdRuleIPv4Prefix,
                 fourRdRuleIPv4PrefixLen,
                 fourRdRuleStartPort,
                 fourRdRuleEndPort,
                 fourRdRuleEALen,
                 fourRdRuleStatus,
                 fourRdRuleStorageType }
         STATUS current
         DESCRIPTION
            " The collection of this objects are used to give the
             mapping rule information in 4rd."
         ::= { fourRdGroups 1 }

             END

7. IANA Considerations

   The MIB module in this document uses the following IANA-assigned
   OBJECT IDENTIFIER values recorded in the SMI Numbers registry:

      Descriptor        OBJECT IDENTIFIER value
      ----------        -----------------------
      FourRd-MIB          { transmission XXX }




Fu, et al.              Expires July 18, 2013                 [Page 8]


Internet-Draft    draft-fu-softwire-4rd-mib-02.txt        January 2013


8. Security Considerations

   The 4rd MIB module can be used for configuration of certain objects,
   and anything that can be configured can be incorrectly configured,
   with potentially disastrous results. Because this MIB module reuses
   the NAT MIB, the security considerations for these MIBs are also
   applicable to the 4rd MIB.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPSec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principles (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

9. References

     9.1. Normative References

   [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
             "Structure of Management Information Version 2 (SMIv2)",
             RFC 2578, April 1999.

   [RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Textual
             Conventions for SMIv2", RFC 2579, April 1999.

   [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
             "Conformance Statements for SMIv2", RFC 2580, April 1999.

   [RFC2863] McCloghrie, K. and F. Kastenholz. "The Interfaces Group
             MIB", RFC 2863, June 2000.



Fu, et al.              Expires July 18, 2013                 [Page 9]


Internet-Draft    draft-fu-softwire-4rd-mib-02.txt        January 2013


   [RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
             Architecture for Describing Simple Network Management
             Protocol (SNMP) Management Frameworks", RFC 3411, December
             2002.

   [RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
             Schoenwaelder, "Textual Conventions for Internet Network
             Addresses", RFC 4001, February 2005.

    [I-D. ietf-softwire-4rd]
             R. Despres, et al., "IPv4 Residual Deployment via IPv6-a
             unified Stateless Solution (4rd)", draft-ietf-softwire-4rd,
             working in progress.

     9.2. Informative References

   [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
             "Introduction and Applicability Statements for Internet-
             Standard Management Framework", RFC 3410, December 2002.

10. Change Log [RFC Editor please remove]

   draft-fu-softwire-4rd-mib-00, original version, 2012-02-01
   draft-fu-softwire-4rd-mib-01, 01 version, 2012-07-16
   draft-fu-softwire-4rd-mib-02, 02 version, 2013-01-17























Fu, et al.              Expires July 18, 2013                [Page 10]


Internet-Draft    draft-fu-softwire-4rd-mib-02.txt        January 2013


Author's Addresses

   Yu Fu
   Huawei Technologies Co., Ltd
   Huawei Building, 156 Beiqing Rd.,
   Hai-Dian District, Beijing 100095
   P.R. China

   Email: eleven.fuyu@huawei.com

   Sheng Jiang
   Huawei Technologies Co., Ltd
   Huawei Building, 156 Beiqing Rd.,
   Hai-Dian District, Beijing 100095
   P.R. China

   Email: jiangsheng@huawei.com

   Bing Liu
   Huawei Technologies Co., Ltd
   Huawei Building, 156 Beiqing Rd.,
   Hai-Dian District, Beijing 100095
   P.R. China

   Email: leo.liubing@huawei.com























Fu, et al.              Expires July 18, 2013                [Page 11]