TRILL Support of Point to Multipoint BFD
draft-zhang-trill-p2mp-bfd-02
| Document | Type |
Replaced Internet-Draft
(i2rs WG)
Expired & archived
|
|
|---|---|---|---|
| Authors | Mingui Zhang , Santosh Pallagatti , Vengada Prasad Govindan | ||
| Last updated | 2015-10-14 (Latest revision 2015-05-12) | ||
| Replaced by | draft-ietf-trill-p2mp-bfd | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Additional resources | Mailing list discussion | ||
| Stream | WG state | Adopted by a WG | |
| Document shepherd | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-trill-p2mp-bfd | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Point to multipoint (P2MP) BFD is designed to verify multipoint connectivity. This document specifies the support of P2MP BFD in TRILL. Similar to TRILL point-to-point BFD, BFD Control packets in TRILL P2MP BFD are transmitted using an RBridge Channel.
Authors
Mingui Zhang
Santosh Pallagatti
Vengada Prasad Govindan
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)