STP Application of ICCP
draft-zhang-pwe3-iccp-stp-01
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Mingui Zhang , Huafeng Wen , Jie Hu | ||
| Last updated | 2013-12-23 | ||
| Replaced by | draft-ietf-pwe3-iccp-stp | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-pwe3-iccp-stp | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Inter-Chassis Communication Protocol (ICCP) supports the inter- chassis redundancy mechanism which achieves high network availability. In this document, the PEs in a Redundant Group (RG) running ICCP are used to offer multi-homed connectivity to Spanning Tree Protocol (STP) networks. The ICCP TLVs for the STP application are defined, therefore PEs from the RG can make use of these TLVs to synchronize the state and configuration data of the STP network.
Authors
Mingui Zhang
Huafeng Wen
Jie Hu
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)