Transporting CoAP Messages over IEEE802.15.4e Information Elements
draft-wang-6tisch-6top-coapie-00
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
---|---|---|---|
Authors | Qin Wang , Xavier Vilajosana , Thomas Watteyne , Raghuram S Sudhaakar , Pouria Zand | ||
Last updated | 2015-01-05 (Latest revision 2014-07-04) | ||
RFC stream | (None) | ||
Formats | |||
Additional resources | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes the format of "CoAP IE", an IEEE802.15.4e Information Element which allows CoAP messages to be transported as part of the IEEE802.15.4e header. This enables 6top-to-6top communication between neighbor nodes in a 6TiSCH network.
Authors
Qin Wang
Xavier Vilajosana
Thomas Watteyne
Raghuram S Sudhaakar
Pouria Zand
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)