Skip to main content

Radius Extension for Lightweight 4over6
draft-sun-softwire-lw4over6-radext-01

Document Type Expired Internet-Draft (individual)
Expired & archived
Authors Chongfeng Xie , Qi Sun , Qiong Sun , Cathy Zhou , Tina Tsou (Ting ZOU) , ZiLong Liu
Last updated 2014-09-07 (Latest revision 2014-03-06)
RFC stream (None)
Intended RFC status (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

lightweight 4over6(lw4over6) [I-D.ietf-softwire-lw4over6] is an extension to DS-Lite in which the amount of state maintained in lwAFTR has been reduced to per-subscriber-level. The lwB4 needs to be provisioned with the public IPv4 address and port set it is allowed to use. The DHCPv4 over DHCPv6 Transport [I.D-ietf-dhc- dhcpv4-over-dhcpv6] and Dynamic Host Configuration Protocol (DHCP) Option for Port Set [I.D-sun-dhc-port-set-option] can be used for lwB4 to provison with the public IPv4 address and port set. However, in many networks, the configuration information may be stored in Authentication Authorization and Accounting (AAA) servers while user configuration is mainly from Broadband Network Gateway (BNG). This document defines a Remote Authentication Dial In User Service (RADIUS) attribute that carries lightweight 4over6 configuration information from AAA server to BNG.

Authors

Chongfeng Xie
Qi Sun
Qiong Sun
Cathy Zhou
Tina Tsou (Ting ZOU)
ZiLong Liu

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)