Skip to main content

Deployment Considerations for Lightweight 4over6
draft-sun-softwire-lightweight-4over6-deployment-01

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
Authors Qiong Sun , Chongfeng Xie , Yiu Lee , Maoke Chen
Last updated 2016-05-07 (Latest revision 2015-11-04)
RFC stream (None)
Formats
Additional resources
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

Lightweight 4over6 is a mechanism which moves the translation function from tunnel lwAFTR (AFTR) to lwB4s (B4s), and hence reduces the mapping scale on the lwAFTR to per-customer level. This document discusses various deployment models of Lightweight 4over6. It also describes the deployment considerations and applicability of the Lightweight 4over6 architecture.

Authors

Qiong Sun
Chongfeng Xie
Yiu Lee
Maoke Chen

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)