Skip to main content

Dynamic Host Configuration Protocol (DHCP) Option for Port Set Assignment
draft-sun-dhc-port-set-option-01

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
Expired & archived
Authors Qiong Sun , Yiu Lee , Qi Sun , Gabor Bajko , Mohamed Boucadair
Last updated 2013-10-12 (Latest revision 2013-04-10)
Replaced by draft-csf-dhc-dynamic-shared-v4allocation
RFC stream (None)
Formats
Additional resources
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

Because of the exhaustion of the IPv4 address space, several techniques have been proposed to share the same IPv4 address among several uses. As an alternative to introducing a level of NAT in the provider's core network, this document provides a mechanism to assign non-overlapping port set to users assigned with the same IPv4 address: Port Set DHCPv4 Option.

Authors

Qiong Sun
Yiu Lee
Qi Sun
Gabor Bajko
Mohamed Boucadair

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)