BGP based Virtual Private Network (VPN) Services over SRv6+ enabled IPv6 networks
draft-ssangli-idr-bgp-vpn-srv6-plus-01

The information below is for an old version of the document
Document Type None Internet-Draft (individual)
Last updated 2019-07-07 (latest revision 2019-07-04)
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized bibtex
Additional URLs
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Unknown state
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ssangli-idr-bgp-vpn-srv6-plus-01.txt

Abstract

This document defines BGP protocol extensions for encoding and carrying SRv6+ Per-Path Service Instruction information to support Virtual Private Network services. This is applicable when the VPN services are offered in a SRv6+ enabled IPv6 network such that the VPN payload is transported over IPv6. The Per-Path Service Instruction information is encoded in the IPv6 Destination Option Header in the IPv6 data packets.

Authors

Srihari Ramachandra (ssangli@juniper.net)
Ron Bonica (rbonica@juniper.net)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)