Usage and applicability of BGP MPLS based Ethernet VPN
draft-rp-l2vpn-evpn-usage-03
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Jorge Rabadan , Senad Palislamovic , Wim Henderickx , Florin Balus , Keyur Patel , Ali Sajassi | ||
| Last updated | 2014-10-14 | ||
| Replaced by | draft-ietf-bess-evpn-usage | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-bess-evpn-usage | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document discusses the usage and applicability of BGP MPLS based Ethernet VPN (EVPN) in a simple and fairly common deployment scenario. The different EVPN procedures will be explained on the example scenario, analyzing the benefits and trade-offs of each option. Along with [EVPN], this document is intended to provide a simplified guide for the deployment of EVPN in Service Provider networks.
Authors
Jorge Rabadan
Senad Palislamovic
Wim Henderickx
Florin Balus
Keyur Patel
Ali Sajassi
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)