LISP Control Plane for SRv6 Endpoint Mobility
draft-rodrigueznatal-lisp-srv6-01
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
|---|---|---|---|
| Authors | Alberto Rodriguez-Natal , Vina Ermagan , Fabio Maino , Darren Dukes , Pablo Camarillo , Clarence Filsfils | ||
| Last updated | 2019-07-22 (Latest revision 2019-01-09) | ||
| RFC stream | (None) | ||
| Formats | |||
| Additional resources | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes the use of the LISP Control Plane to support endpoint mobility and Location/ID separation in Segment Routing v6 (SRv6) deployments.
Authors
Alberto Rodriguez-Natal
Vina Ermagan
Fabio Maino
Darren Dukes
Pablo Camarillo
Clarence Filsfils
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)