Skip to main content

Data Fields Encapsulation Model of In-situ OAM in SRv6 Network
draft-qiu-spring-srv6-ioam-encap-model-00

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
Authors Yuanxiang Qiu , Jinrong Ye , Hao Li
Last updated 2021-12-05 (Latest revision 2021-06-03)
RFC stream (None)
Formats
Additional resources
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

OAM and PM information from the SR endpoints can be piggybacked in the data packet. The OAM and PM information piggybacking in the data packets is also known as In-situ OAM (IOAM). IOAM records OAM information within the packet while the packet traverses a particular network domain. The term "in-situ" refers to the fact that the IOAM data fields are added to the data packets rather than being sent within probe packets specifically dedicated to OAM. This document defines the data fields encapsulation model of IOAM TLV in SRv6 network.

Authors

Yuanxiang Qiu
Jinrong Ye
Hao Li

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)