The checksum in DIASER/UDP/IP is a XOR without STX
draft-petrescu-ipwave-diaser-checksum-01
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Alexandre Petrescu , Mariama Sarr | ||
| Last updated | 2019-11-21 (Latest revision 2019-05-20) | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document defines the manner in which to calculate the checksum for the protocol DIASER. DIASER is a protocol for communication with traffic lights controllers used in France. DIASER is specified at AFNOR. The specification misses an instruction on how to compute the 'BCC' checksum ('Byte Character Control').
Authors
Alexandre Petrescu
Mariama Sarr
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)