DHCP options for Access Point Name and attach type indication
draft-patil-dhc-apn-attachtype-options-01
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Basavaraj Patil , Kuntal Chowdhury , Domagoj Premec | ||
Last updated | 2009-03-08 | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Access Point Names are used in wireless networks which are based on 3GPP standards to identify a specific gateway element. A mobile node which attaches via a 3GPP access network indicates the gateway to which connectivity is desired by providing the gateways access point name, in the network attach signaling messages. This document specifies a new DHCP option which enables the mobile node to request connectivity to a gateway, identified by the access point name, in DHCP messages. A mobile node whose mobility is managed by the network using Proxy Mobile IPv6 protocol may perform a handover from one access technology to another. This document defines a DHCP option which enables the host to indicate to Proxy Mobile IPv6 elements in the access network if the attachment via the new interface is a handover or a new connection.
Authors
Basavaraj Patil
Kuntal Chowdhury
Domagoj Premec
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)