Transmission of IPv6 Packets over Bluetooth Low Energy
draft-patil-6lowpan-v6over-btle-01

Document Type Replaced Internet-Draft (individual)
Last updated 2011-10-25 (latest revision 2011-03-12)
Replaced by draft-ietf-6lowpan-btle
Stream (None)
Intended RFC status (None)
Formats
Expired & archived
pdf htmlized bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Replaced by draft-ietf-6lowpan-btle
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-patil-6lowpan-v6over-btle-01.txt

Abstract

Bluetooth low energy is a low power air interface technology that is defined by the bluetooth SIG. The standard bluetooth radio has been widely implemented and available in mobile phones, notebook computers, audio headsets and many other devices. The low power version of bluetooth is a new specification and enables the use of this air interface with devices such as sensors, smart meters, applicances, etc. There is an added value in the ability to communicate with sensors over IPv6. This document describes how IPv6 is transported over bluetooth low energy using 6LoWPAN techniques.

Authors

Basavaraj Patil (basavaraj.patil@nokia.com)
Teemu Savolainen (teemu.savolainen@nokia.com)
Johanna Nieminen (johanna.1.nieminen@nokia.com)
Markus Isomaki (markus.isomaki@nokia.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)