Path Computation Element (PCE) Protocol Extensions for Stateful PCE usage for Point-to-Multipoint Traffic Engineering Label Switched Paths
draft-palle-pce-stateful-pce-p2mp-09
Document | Type | Replaced Internet-Draft (candidate for pce WG) | |||
---|---|---|---|---|---|
Authors | Udayasree Palle , Dhruv Dhody , Yosuke Tanaka , Zafar Ali , Vishnu Beeram | ||||
Last updated | 2016-06-28 (latest revision 2016-06-09) | ||||
Replaces | draft-palle-pce-stateful-pce-initiated-p2mp-lsp | ||||
Replaced by | RFC 8623, RFC 8623 | ||||
Stream | Internet Engineering Task Force (IETF) | ||||
Formats |
Expired & archived
pdf
htmlized (tools)
htmlized
bibtex
|
||||
Additional Resources |
|
||||
Stream | WG state | Call For Adoption By WG Issued | |||
Document shepherd | No shepherd assigned | ||||
IESG | IESG state | Replaced by draft-ietf-pce-stateful-pce-p2mp, draft-ietf-pce-stateful-pce-p2mp | |||
Consensus Boilerplate | Unknown | ||||
Telechat date | |||||
Responsible AD | (None) | ||||
Send notices to | (None) |
https://www.ietf.org/archive/id/draft-palle-pce-stateful-pce-p2mp-09.txt
Abstract
The Path Computation Element (PCE) has been identified as an appropriate technology for the determination of the paths of point- to-multipoint (P2MP) TE LSPs. This document provides extensions required for Path Computation Element communication Protocol (PCEP) so as to enable the usage of a stateful PCE capability in supporting P2MP TE LSPs.
Authors
Udayasree Palle
(udayasree.palle@huawei.com)
Dhruv Dhody
(dhruv.ietf@gmail.com)
Yosuke Tanaka
(yosuke.tanaka@ntt.com)
Zafar Ali
(zali@cisco.com)
Vishnu Beeram
(vbeeram@juniper.net)
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)