Skip to main content

Network Survivability Considerations for Traffic Engineered IP Networks
draft-owens-te-network-survivability-03

Document Type Expired Internet-Draft (tewg WG)
Expired & archived
Authors Ken R. Owens , Mathew Oommen , Vishal Sharma , Fiffi A. Hellstrand
Last updated 2002-05-14
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status (None)
Formats
Additional resources Mailing list discussion
Stream WG state WG Document
Document shepherd (None)
IESG IESG state Expired
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

Network survivability refers to the capability of the network to maintain service continuity in the presence of faults within the network [1]. This can be accomplished by recovering quickly from network failures quickly and maintaining the required QoS for existing services. With the increasing sophistication of network technologies, survivability capabilities are becoming available at multiple layers, allowing for protection and restoration to occur at any layer of the network. This makes it important to: scrutinize the recovery features of different network layers, understand the pros and cons of performing recovery at each layer, and assess how the interactions between layers impact network survivability. With these objectives in mind, this draft examines the considerations for network survivability at different layers of the network.

Authors

Ken R. Owens
Mathew Oommen
Vishal Sharma
Fiffi A. Hellstrand

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)