Rate Measurement Problem Statement
draft-morton-ippm-rate-problem-02
Document | Type |
Replaced Internet-Draft
(individual in tsv area)
Expired & archived
|
|
---|---|---|---|
Author | Al Morton | ||
Last updated | 2015-10-14 (Latest revision 2012-03-01) | ||
Replaced by | draft-ietf-ippm-rate-problem | ||
RFC stream | Internet Engineering Task Force (IETF) | ||
Intended RFC status | Informational | ||
Formats | |||
Stream | WG state | (None) | |
Document shepherd | (None) | ||
IESG | IESG state | Replaced by draft-ietf-ippm-rate-problem | |
Action Holders |
(None)
|
||
Consensus boilerplate | Unknown | ||
Telechat date | (None) | ||
Responsible AD | Wesley Eddy | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
There is a rate measurement scenario which has wide-spread attention of users and seemingly all industry participants, including regulators. This memo presents an access rate-measurement problem statement for IP Performance Metrics. Key aspects require the ability to control packet size on the tested path and enable asymmetrical packet size testing in a controller-responder architecture.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)