Best Current Practices for Securing Internet of Things (IoT) Devices
draft-moore-iot-security-bcp-00
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
|---|---|---|---|
| Authors | Keith Moore , Richard Barnes , Hannes Tschofenig | ||
| Last updated | 2017-05-04 (Latest revision 2016-10-31) | ||
| RFC stream | (None) | ||
| Formats | |||
| Additional resources | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
In recent years, embedded computing devices have increasingly been provided with Internet interfaces, and the typically-weak network security of such devices has become a challenge for the Internet infrastructure. This document lists a number of minimum requirements that vendors of Internet of Things (IoT) devices need to take into account during development and when producing firmware updates, in order to reduce the frequency and severity of security incidents in which such devices are implicated.
Authors
Keith Moore
Richard Barnes
Hannes Tschofenig
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)