MPLS-TP Pseudowire Configuration using OpenFlow 1.3
draft-medved-pwe3-of-config-01
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Authors | Jan Medved , Andrew McLachlan , David Meyer | ||
Last updated | 2013-01-11 (Latest revision 2012-07-10) | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes a method by which MPLS-TP Pseudowires (PW) can be configured in an LER using OpenFlow 1.3. In addition to the configuration of PWs this document also specifies how to enact OAM for these PWs using standard IETF conventions defined by the GAL label method. The primary goal of this document is to provide a simple and yet flexible method for configuring PWs using standardized tools from the emerging SDN toolkit.
Authors
Jan Medved
Andrew McLachlan
David Meyer
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)