PIM Backup Designated Router Procedure
draft-mankamana-pim-bdr-02
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
---|---|---|---|
Author | Mankamana Prasad Mishra | ||
Last updated | 2019-10-24 (Latest revision 2019-04-22) | ||
RFC stream | (None) | ||
Formats | |||
Additional resources | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
On a multi-access network, one of the PIM routers is elected as a Designated Router (DR). On the last hop LAN, the PIM DR is responsible for tracking local multicast listeners and forwarding traffic to these listeners if the group is operating in PIM-SM. In this document, we propose a mechanism to elect backup DR on a shared LAN. A backup DR on LAN would be useful for faster convergence. This draft introduces the concept of a Backup Designated Router (BDR) and the procedure to implement it.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)