Dynamic IPv4 Provisioning for Lightweight 4over6
draft-liu-softwire-lw4over6-dynamic-provisioning-00
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
|---|---|---|---|
| Authors | Cong Liu , Qi Sun , Jianping Wu , Ian Farrer | ||
| Last updated | 2016-01-07 (Latest revision 2015-07-06) | ||
| RFC stream | (None) | ||
| Formats | |||
| Additional resources | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Lightweight 4over6 [I-D.ietf-softwire-lw4over6] is an IPv4 over IPv6 hub and spoke mechanism that provides overlay IPv4 services in an IPv6-only access network. Provisioning IPv4 addresses and port sets to customers is the core function of the Lightweight 4over6 control plane. [I-D.ietf-softwire-lw4over6] describes the use of DHCPv6 for deterministic IPv4 provisioning. This document describes a dynamic IPv4 provisioning mode for Lightweight 4over6 that based on DHCPv4 over DHCPv6 [RFC7341].
Authors
Cong Liu
Qi Sun
Jianping Wu
Ian Farrer
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)