Short SID for SRv6
draft-li-spring-srv6-ssid-00
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Taixin Li , Zhe Chen | ||
| Last updated | 2020-05-14 | ||
| Replaced by | draft-li-chen-srv6 | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-li-chen-srv6 | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
Segment Routing enables an operator or an application to specify a packet processing program. When Segment Routing is applied to IPv6 data plane, the list of IPv6 SIDs in SRH makes overhead a big challenge. This document proposes Short SID (SSID) and Short SRH (SSRH), and the operations with SSRH. The proposed solution tries to reduce the overhead of SRv6 without defining new routing header.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)