Proxy MPLS Traffic Engineering Label Switched Path(LSP)
draft-li-mpls-proxy-te-lsp-01
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Zhenbin Li , Xinzong Zeng | ||
| Last updated | 2015-01-05 (Latest revision 2014-07-04) | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes a method to setup MPLS TE proxy egress LSP which can help setup end-to-end LSP through stitching MPLS TE proxy egress LSP with BGP LSP in the Seamless MPLS network. The method is achieved by new Proxy Destination Object carried in RSVP-TE messages.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)