Label Distribution Using ARP
draft-kompella-mpls-larp-02

The information below is for an old version of the document
Document Type Expired Internet-Draft (mpls WG)
Authors Kireeti Kompella  , Balaji Rajagopalan  , George Swallow 
Last updated 2015-04-30 (latest revision 2014-10-27)
Stream Internet Engineering Task Force (IETF)
Formats
Expired & archived
pdf htmlized bibtex
Additional Resources
- Mailing list discussion
Stream WG state Candidate for WG Adoption
Document shepherd Loa Andersson
IESG IESG state Expired
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to draft-kompella-mpls-larp.shepherd@ietf.org, draft-kompella-mpls-larp.ad@ietf.org, mpls-chairs@ietf.org, draft-kompella-mpls-larp@ietf.org, "Loa Andersson" <loa@pi.nu>

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-kompella-mpls-larp-02.txt

Abstract

This document describes extensions to the Address Resolution Protocol to distribute MPLS labels for IPv4 and IPv6 host addresses. Distribution of labels via ARP enables simple plug-and-play operation of MPLS, which is a key goal of the MPLS Fabric architecture.

Authors

Kireeti Kompella (kireeti.kompella@gmail.com)
Balaji Rajagopalan (balajir@juniper.net)
George Swallow (swallow@cisco.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)